1 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

20-05-2025 2 Days Left
|

T247 ID- 87946784 |

supply of six types of items - connecting plate assembly drawing 172.28.074sbsb ,fan drive neck bearing ring 54.08.128 , spring pin 54.41.017 4a , shackle 432.63.135 , support assemblydrawing 172.18.078sbsb , shaft 172.63.112 connecting plate assembly drawing 172.28.074sbsb, | quantity - 2001

Tiruvallur, Tamil Nadu, India

BID NOW

INSIGHTS : BY COUNT

Please wait. AI is bringing Insights Matrix.

2 |

Bid Value:
₹ 1069.66 Cr. |

EMD:
₹ 10.00 Cr. |

09-06-2025 22 Days Left
|

T247 ID- 88237931 |

lot i civil works comprising of hrt including adits, surge shaft including adits, pressure shaft including adits, underground p/h cavern, bus ducts, underground transformer cavern, underground dt gate operation cavern and others as per scope of work.

Srinagar, Jammu And Kashmir, India

BID NOW

3 |

Bid Value:
₹ 10.58 Cr. |

EMD:
₹ 1 |

19-05-2025 1 Day Left
|

T247 ID- 87805437 |

corrigendum : procurement of main engine spares - clamp, bolt hax soc, valve keeper wedge, diaphragm, hand pump, filter element, split pin 5 x 45 din 94, contam indicator, actuating cylinder, washer, exh pipe bellows, insert paper, first plate, end plate, base complete, guide ring, end plate, ring sealing, first plate, rubber bellows, end plate, first plate, nut, circlip, snap ring 32x1.5 din 471, circlip, snap ring 42x1.75 din 472, circlip for set w6, snap ring 68 x 2,5 din 472, incandescent lamp, o-ring 11.3x2.2 for set w6, plug, screw m10x30, screw m12x50, screw, hex nut, nut, hex nut, nut (m12), stud, countersunk hd screw, adjusting washer, rotary seal, pin spring, pressure monitor 2.2 bar, washer a 16, pressure spring, oil pump, oil filter (element), pressure sensor 15 bar, pressure sensor +/- 70m bar, pressure sensor, drain valve, switch, pressure sensor, cylindrical pin, conical spr washer, seal ring, ring sealing a12x15.5, ring sealing (crank case) a14x18, ring sealing, sealing ring, ring sealing (crank case) a20x24, sealing ring, ring sealing a26x31, sealringa26x34forsetw6, washer a, ring sealing (crank case) a30x36, ring sealing (crank case) a38x44, ring sealing a45x52, ring sealing a52x60, taper facecomp.ring, ring seal, o-ring, sealing ring for set w6, grease nipple am 6x1, nozzle holder, bearing angular contact roller, bolt hex gal cu 5 bk, adjusting washer 42x 52 x 0,1 din 988, cinical spr. washer, conical spr. washer, screw, hex screw, sealant pipe thread loctite 586, clamp, sealing paste gd block, silcone rubber loctite 5970, valve, washer, washer, washer, turbine wheel, ring snap, nut, speed transmitter dm52, cylinder head complete, carbon scrapper ring, sealing ring for set w5, gasket, gasket for set w5, bolt m20 1.50x103.0 lg 18 conrod, bushing con rod 75.00, con.rod brg.upper half, idler gear, bolt adjusting, tube asm cyl head fuel return, adapter, trust member, flap, shaft, bracket turbo speed sensor, pressure valve, sleeve guide oil clr, cover, bolt cylinder head, grommet, sealing ring, adapter 60deg m14x1. 5, cylinder, shaft, flange sealing, bearing bushing, bearing bushing, bearing bushing, shaft, cable for monitor system, coolant pump shaft, impeller, impeller, wiring harness for engine sensor, actuating cylinder, insert (crank case breather), diaphgarm, spacer bushing, gasket, flow restrictor, sealing ring, microswitch, benjo screw, tab washer, grommet 6, grommet, grommet, grommet, sleeve rubber, grommet, grommet, seal oil, union 32 g, o-ring for set w5, o-ring for set w6, o-ring, o-ring, o ring 26 x 2.5 mmn 294, o-ring, o ring, o ring, o-ring, o ring 39.2x3, o ring, o ring, o-ring, o - ring, o-ring 60x4 for set w5, o ring, o-ring, o ring, o ring, o ring, o ring, 'o' ring, o ring, o-ring for set w6, o ring, hose line, hose, hose line, regulator fuel retur n 0.5 bar, valve check 0.2 bar rhdk 18-l 0.2, spacer, exhaust bellow. dn 400, washer a cop, gasket for set w5, gasket for set w5, gasket, paper pack centrifugal spinner filter, screw, nut, compensating washer, washer, washer, repair kit, nut, sealing cone 22mbn 15005, straight connector, adaptor 10 / 6 n 15007, transition socket, union, clamp, vibration damper, cylinder head, exhaust bellows, injector, piston, coolant pump high-temp circuit, washer, impeller for sea water pump, bearing body, gear, rotary seal, level monitor, pressure sensor, cover for solars, actuator vlv, corrosion inhibitor conc. coolant cs100, pressure sensor, track-ball, wiring harness for on-engine sensor, conrod bearing size 0-0(s/sx00040714), gasket, flow restric valve, link (x52408100007), support plate, valve collet, exhaust compressor, hex crew, bearing camshaft std, valve spring outer, hp line, non return valve, valve, clamp, bracket wiring harness, diff-press monitor, screw, snap ring 48x1.75 din 472, spring pin for set w6, swing foll, grooved pin, woodruff key, sealing ring, repair kit, union, gasket for set w6, hex screw, union, tube asm sol oil supply, nut m16 04-2 din439, bolt spl m10 1.00x40 to m6 0.2 8.8, o-ring, plate, o ring, ring asm, locking ring, ring seal g7 ki ka, axial bearing, ring carrier, gasket kit, cylinder roller bearing, gasket, pipe clamp half, grub screw, press relief valve, wiring harness for on-engine sensor, tube asm turbo oil supply a-bank

Uttara Kannada, Karnataka, India

BID NOW

4 |

Bid Value:
₹ 1.07 Cr. |

EMD:
₹ 1.20 Lakh |

20-05-2025 2 Days Left
|

T247 ID- 88145569 |

buy-back of set of worm shaft & worm wheel gear along with worm shaft key & locknut in set of coal mill type xrp 783 at wtps.

Kheda, Gujarat, India

BID NOW

5 |

Bid Value:
₹ 92.16 Lakh |

EMD:
₹ 1.12 K |

19-05-2025 1 Day Left
|

T247 ID- 87946861 |

corrigendum : procurement of spares for flowmore make hscpumps dowel pin int stage bush part no f597518 , bearingcover n.d.e. part no f597535 , sleeve nut d.e. partno f597550 , set of bolts, bushes, washers and nuts coupbolt part no coupbolt274821 , rotating assly.part no flrauf5975ds , stud bolt with nut part nof597528 , stud nut, bolt and wshr uandbend csngat bttm part no f597544 dowel pin int stage bush part no f597518, bearingcover n.d.e. part no f597535, sleeve nut d.e. part nof597550, set of bolts, bushes, washers and nuts | quantity - 68

Korba, Chhattisgarh, India

BID NOW

Explore BOQ Based Supply Opportunities for “spring pins”

Reach 10K+ Government Contractors Searching for “spring pins” Supplier

Discover Opportunities

6 |

Bid Value:
₹ 80.59 Lakh |

EMD:
₹ 1.61 Lakh |

22-05-2025 4 Days Left
|

T247 ID- 88018320 |

supply of - conveyor deck assy 67 tg 1600mm r-2 part no.tb0555, conveyor roller group part no.ta6785 , conveyorreturn roller grp with bracket part no.ta3627 ,sprocket part no.ta7684 , conveyor counter shaft assy part no.tb0551 , take up housing assy partno.tb0034 , take up housing assy part no.tb0035 ,conveyor tail wheel assy part no.tb0554 , boltsprocket part no.ta1587 | quantity - 131

Singrauli, Madhya Pradesh, India

BID NOW

7 |

Bid Value:
₹ 76.37 Lakh |

EMD:
₹ 1.53 Lakh |

29-05-2025 11 Days Left
|

T247 ID- 88210148 |

supply of undercarriage spares for 182 m marion shovels - block adjusting , roller rear idler with bushing ,roller load bushing , bushing , shaft rear roller ,shaft load roller , spacer , washer thrust , coller , grid member , cover , capscr,spcl m30x260 8.8 ,capscr,spcl m30x240 8.8 , nut hx slotted m 30 x 3.5cl 10 block adjusting6026281, roller rear idler withbushing6027610, roller load bushing6027628,bushing6026257, bushing6025714, shaft rearroller6027636, shaft load roller6025676, | quantity - 254

Sidhi, Madhya Pradesh, India

BID NOW

8 |

Bid Value:
₹ 66.19 Lakh |

EMD:
₹ Refer Docs |

26-05-2025 8 Days Left
|

T247 ID- 88105402 |

supply of spares for kirloskar make pumps different model - delivery casing vde , suction casing , set of o ring 5stage , oil seal de nde , set of tie bar with nut andwasher 4stage , liquied deflector , impeller 1st stage, impeller 2end stage , pump shaft cw ccw , wear ring ,interstage ring , split gland , lantern ring , shaft sleeve ,shaft sleeve , bearing cover de , bearing cover nde ,bearing cartridge de ci , bearing cartridge nde ci , rotating assembly , impeller i stage , impeller ii stage, bearing housing unit , wear ring , pump shaft ,rotating assembly , enclosed impeller , shaft sleevesuc.side , shaft sleeve del.side , stage casing ,diffuser with guide vanes , cooling chamber , diffuser ,shaft sleeve de nde , shaft cw ccw , casing wearing ringsuc , casing wearing ring del , impeller , bearing housingunit , rotating assembly | quantity - 101

Anuppur, Madhya Pradesh, India

BID NOW

9 |

Bid Value:
₹ 59.78 Lakh |

EMD:
₹ 7.61 K |

26-05-2025 8 Days Left
|

T247 ID- 88282577 |

supply of kirloskar make pump different model of ci pump - bearing cartridge de ci shm6532nqci241 , back pull outassly q type std ftd shm6532nqstdftdsubbpa , semiopen impeller q type ci shm6532nqci151 , pump shaft c 40dsm6532abc40180 , impeller nut bronze dsm6532abbr330, impeller 1st stage ci dsm6532abci157 , insert 1st stage cidsm6532abci9891 , insert 2nd stage ci dsm6532abci9892 ,rotating assembly std ftd dsm6532abstdftdsubrua2 ,impeller 2nd stage ci dsm6532abci158 , shaft sleeve dende ci dsm10036ci310 , shaft sleeve nut bronzedsm10036br334 , bearing housing unit stddsm10036stdsubbhudsm36 , set of o ring rubberdsm10036rubberssor1 , wear ring ci dsm10036ci190 ,top and bottom assembly ci dsm10036cistaba , impeller1st stage ci dsm10036ci157 , rotating assembly std ftddsm4rmstdftdsubrua2 , balancing disc cimla100125ci464 , balancing ring ci mla100125ci463 ,shaft sleeve ds ci mla100125ci310 , shaft sleeve nds cimla100125ci311 , wear ring ci mla100125ci190 , interstage bush ci mla100125ci358 , bearing housing de nde mtype ci mla100125ci240 , set of o ring for 5 stage rubbermla1001255rubberssor1 , pump shaft 3 stage c 40mla1001253c40180 , suction casing ci mla100125ci113 ,delivery casing ci mla100125ci111 , impeller stage cimla100125ci151 , set of keys 5 stage c 40mla1001255c40ssok1 , set of ctsk screw 5 stage cl4 6mla1001255cl46ssoc1 | quantity - 371 1

Korea, Chhattisgarh, India

BID NOW

10 |

Bid Value:
₹ 56.47 Lakh |

EMD:
₹ 1.13 Lakh |

26-05-2025 8 Days Left
|

T247 ID- 88313214 |

supply of spare items for mcnally make vibrating screening feeder installed at chp,csctpp, chhabra - spring support bracket thus (disch. end), spring support bracket reverse (disch. end), spring support bracket thus (feed end), spring support bracket reverse (feed end), jack shaft assembly, coupling half, lock plate, coupling half, lock plate, coupling intermediate, coupling intermediate, pusher rubber, friction cap, helical inner spring, helical compression spring, helical gear l.h helix, helical gear r.h helix, drive shaft, driven shaft, oil flinger disc cum sleeve, oil seal housing, oil flinger, dust flinger, oil housing drive end (r.h drive), oil housing gear end (r.h drive), bearing retainer ring, bearing retainer ring, sight level boss, shaft end cap-gear end, spacer, breather plug: 1 inch bsp

Baran, Rajasthan, India

BID NOW

11 |

Bid Value:
₹ 55.22 Lakh |

EMD:
₹ 1.66 Lakh |

26-05-2025 8 Days Left
|

T247 ID- 88024545 |

supply of exchangeble vane, impeller and shaft for id fan and blades for fd fan for boiler unit # 7 at wanakbori tps

Wanakbori, Gujarat, India

BID NOW

Access BOQ leads for “spring pins”

Connect with more than 10K verified Buyers for “spring pins”

Explore Buyers

12 |

Bid Value:
₹ 49.98 Lakh |

EMD:
₹ Refer Docs |

31-05-2025 13 Days Left
|

T247 ID- 88174977 |

work of complete rewinding,reconditioning & repairing of 6.6 kv 800 kw,1481 rpm ht motor along with required spares installed at impact crusher in chp-1(4x210mw).tps khaperkheda. procurement offlexible cables requiredduring coh forem-ii500mwkhaperkhedatps. em2, procurement of lighting material for em-i 5oomw khaperkhedatps. em2, work of "monitoring & verification audit of dc by emaea firm underpat cycle-7,of bee scheme,mop, govt.of india.for 4210 mw and 1500mw units of khaperkhedatpsofmspgcl. pog1. procurement of main verticalshaftfor xrp 883 coal millsinunitno.3&4. bm1. work of providing an electric vehicle 8-seater (e-cart)withdriveron hire basisatkhaperkheda tps,210 mw. os1. procurement of turbine bearing jacking oil hoses forunit 1and4 cohkhaperkhedatps. tm1, procurement of inlet pipe ventury assembly of coal millxrp803%hpforunit 1&2. bm1,. procurment of inlet pipe ventury assembly of coal millxrp 883forunit4aohkhaperkhedatps bm1, procurement of journal assembly head of coal mill xrp883forunitno.3 &4khaperkhedatps. bm1, supplyof thermostatfor210mw khaperkhedatps. c&11, supply of electro-pneumatic converter and volume boosterfor4x210mwkhaperkhedatps. tic1. procurement of various hardware consumables and chemicalsatkhaperkhedatps. cs, supply &replacement ofair heaters for remote silo dryashevacuation systemat unit#5 tps,khaperkheda. em2.

Khaparkheda, Maharashtra, India

BID NOW

13 |

Bid Value:
₹ 40.01 Lakh |

EMD:
₹ Refer Docs |

15-06-2025 28 Days Left
|

T247 ID- 88473275 |

providing, fixing and replacing acid resistance tiles to sulphuric acid tank, cpu area,n-pit and drain area at 1x500mw,tps,khaperkheda, ii). procurement of gaskets for coh u#01 & 04 at khaperkhedatps iii). procurement of hpt and ipt extraction angle ring, threaded ring and helical spring for gland sealing for coh of unit 01 and 04. iv). comprehensive maintenance contract for servicing and repairing electrical hoist & eot cranes installed at various locations in chp-i, khaperkheda tps. v). procurement of design, development manufacturing supply with erection commissioning of bottom ash overflow pump along with motor at khaperkheda vi). procurement of worm shaft thrust and guide bearing housing of xrp 8031/2 hp coal mill in unit no. 01 & 02 vii). work contract for hiring of poclain required at coal handling plant, 500 mw, t.p.s. khaperkheda on as and when required basis. viii). procurement of chain operated inlet gate assy. for 36 gravimetric coal feeder at unit-5, 500 mw, tps, khaperkheda. ix). work of removal and refitting of drum internals at unit no. 04 aoh. x). procurement of various spares for xrp 883 coal mills scraper assembly spares of unit no. 03 & 04 xi). supply and installation of seal air fan at u#01 & 02. xii). replacing of damaged chajja of staff quarters at prakashnagar colony tps khaperkheda xiii). procurement of spares for hp bypass system valves at unit no. 05 (500mw) tps, khaperkheda.

Khaparkheda, Maharashtra, India

BID NOW

14 |

Bid Value:
₹ 40.00 Lakh |

EMD:
₹ 75.00 K |

24-05-2025 6 Days Left
|

T247 ID- 88366529 |

supply of hardware items for season 2025-26 - m.s. bolts of different sizes half thread/full thread (bsw), m.s. nut different sizes (bsw), m.s. bolts of different sizes (mm sizes), m.s. nut of different sizes (mm sizes), m.s. washer different sizes, m.s. rod different sizes, en-8 road different sizes, m.s. rivets different sizes, grinding wheel carborandum universal make of different sizes (as per price list), m-seal pidilite gasket sealant (in 1kg.pkt.), carborandum make emery paste, carborandum make emery paste rough (in 200gm packing), carborandum make emery paste fine (in 200 gm packing), carborandum make emery cloth & tape, emery cloth rough, emery cloth fine, emery tape 2 rough (50mtr), emery tape 2 fine (50mtr), m.s. square different sizes. (as per price list), m-seal pidilite make phataphat, free man make measuring tape, size 3mtr., measuring scale of steel, size 12 long, measuring scale of steel, size 24 long, measuring scale of steel size 36 long, heavy duty chain pulley block 10mtr lift, p-model, indef with test certificate 1 ton capacity., heavy duty chain pulley block 10mtr lift, p-model, indef with test certificate 2 ton, heavy duty chain pulley block 10mtr lift, p-model, indef with test certificate 3 ton, holdite compound pidilite (in 500gm), pvc solvent cement, plastochem (in 500g), loctite 495 ( in 20ml), loctite 262 (in 50ml), loctite 510 (in 50ml), loctite 574 (in 50ml), loctite 638 (in 50ml), loctite 641 (in 50ml), loctite 609 (in 50ml), anabond 666 rtv silicon sealant 100gm, blue colour tube camel (in 20ml), brasso (in100ml), araldite in 36gms packing, rubber adhesive, dunlop make s-758 (in 1kg. packing), graphite powder fine kg., aluminum rivets different sizes., cotton waste coloured, hexa frame size 12, dunlop make rubber hose pipe for water use of various sizes., molykore copper paste p-1600, namda size thick, namda size thick, namda size 1, piano wire, nylock nut bsw of various sizes, restoline ( in ltr.), m.s. u clamp for wire rope, size 5/8, m.s. u clamp for wire rope, size 3/4, m.s. u clamp for wire rope, size 1, rubber sheet (black) size 1/8 thick jyoti, rubber sheet (black)size thick, usha martin make steel wire rope-grade 6-19, 18mm, hempcore with test certificate (with cenvat benefit), brass ferrule, size , brass ferrule size 3/16, brass ferrule size 3/8, red lead diwaldi make, white lead shakura make, spring steel flat different sizes, teflon rod, size 25mm x 300mm, teflon rod, size 32mm x 300m, teflon rod, size 38mm x 300mm, teflon rod, size 50mm x 300mm, teflon rod, size 60mm x 300mm, teflon rod, size 80mm x 300mm, teflon rod, size 100mm x 300mm, teflon tape, champion make, size , teflon tape, champion make size , miranda make hackwaw bladex12(23gauge) 18 tpl, la type, hss parting tool & tool bit s-400 miranda make mark ii (as per price), widia/sanwick make carbide tip v shape of various sizes., s.s. hexagonal bolt & nut/ ss allen bolt, grade 304 (non magnetic), (as per price list), of various size., die nut totem make size bsw, die nut totem make size 3/8 bsw, die nut totem make size bsw, die nut totem make size 5/8 bsw, polypropylene rope garware make with test certificate size 18mm, polypropylene rope garware make with test certificate size 20mm, polypropylene rope garware make with test certificate size 25mm, rope pulley block one way, rope pulley block two way, d shackle , d shackle 3/4, d shackle 1, screw jack 5 ton capacity., screw jack 10 ton capacity., steel wire rope 7/8 (22mm) for mill overhead crane, suitable for 15 ton load., composite make industrial brake liner 9.5mm (3/8) thick, goodyear make flat belt, totem make std tap sets., mykoda make oil seals., flat, half round & triangular files, j.k., straight & taper shank drills addison, screw drivers, combination pliers, nose pliers, ring spanners, d spanners, pipe wrench, jhallani make, spring washers bbbb make, champion make cotter split pins, tc, ph, px type rubber tyre for coupling , unique make, tc, ph, px type rubber tyre coupling complete, unique, high tensile hexagonal & allen key bolts unbrako make., lead wire 2mm, g.m. rod, size up to 50mm, gear coupling gc 102, gear coupling gc 107, gear coupling gc 110, gear coupling gc 111, painting brush, size 4, painting brush, size 6, painting brush, size 2, brass hexagonal rod , size 27mm, metallic oil seal, mykoda make, of various sizes., hand gloves 12, welding holder 600a, esab, carbide tip 1 u shape, widia, carbide tip 1.1/2, v shape, widia, brazing rod, size 1/8, brazing rod, size 1/16, leatherized paper, 10mile, welding glass (black), white glasses, welding screen, forged u clamp, size 5/8, love joy rubber star , size- od- 45mm, length 75mmgas cutter hose pipe, size 8mm, red, gas cutter hose pipe, size 8mm, blue, welding copper cable 600amp., power saw blade, 2 width x 32ft. long, taparia make pipe wrench, size 14 heavy duty, cutozen nozzle size 3/64, cutozen nozzle size 1/16, lead wire 3 mm, lead wire 1 mm, bosch make angle grinder, heavy duty, size 4, goggles coloured, taparia make nose plier, filler gauge, size 6, grease gun 5ltr. capacity., triangular file, size 5, araldite (1.8kg), s.s. nut, various sizes, s.s. washer, size , leatherised paper, size 1/64, circlip plier, taparia, size 12, felt namda 6mm x 5 mtr. length, lead, molykote br2 plus, roll guard grease, grab screw socket head 16 x 50, teflon rod, size 4, lock nut km-15, lock washer km-15, s.s. stud 12 x70mm, steel wire rope 6 x 19mm, hempcore, size 20mm usha martin, rubber hose pipe (hydraulic hose pipe) both ends straight, female fitting 1/2" bsp t, working 2610 psi- 1000mm. long, rubber star l-95, rubber star l-190, rubber star vr-070, rubber star l-110, rubber star l-226, hydraulic hose pipe, both ends straight, female fitting 3/4", bsp thread, working pressure 105 barr/ 1520 psi, 1500mm long., hydraulic hose pipe, both ends straight, female fitting 3/8" (10mm), bsp thread, working pressure 198 barr/ 2610 psi, 750mm long., hydraulic hose pipe, both ends straight, female fitting 1/4", bsp thread, working pressure 105 barr/ 3250 psi, 1000mm long., hydraulic hose pipe, both ends straight, female fitting 1/4", bsp thread, working pressure 105 barr/ 3250 psi, 500mm long., hydraulic hose pipe, both ends straight, female fitting 3/8", bsp thread, working pressure 180 barr/ 2610 psi, 2400mm long., hydraulic hose pipe, both ends straight, female fitting 3/8", bsp thread, working pressure 198 barr/ 2610 psi, 1500mm long., hydraulic hose pipe, both ends straight, female fitting 1/2" (12.7mm), bsp thread, working pressure 180 bar/ 2610 psi, 2400mm long., hydraulic hose pipe, both ends straight, female fitting 5/16" (7.9mm), bsp thread, working pressure 215 bar, 1000mm long., hydraulic hose pipe, both ends straight, female fitting 3/8", bsp thread, working pressure 180 barr/ 2610 psi, 1500mm long., hydraulic hose pipe, with bore side straight and one side 90, female fitting 1", bsp thread, working pressure 90 barr/ 1300 psi, 1250mm long., wire breaded flexible hose pipe, both side female thread 3/4". working pressure 2610psi, 1500 mm long, rubber hose pipe ph254-1/4", 1501436/en853 smdn sae-100 h2at-04, both side female, flexible hose pipe 3/4", working pressure 05kg/sq.cm., lock nit km-15, lock nit km-22, lock washer mb-15, hydraulic filter complete with gasket (imported), u.s.a. no. 926169, spre tyre f-60, spre tyre f-50, spre tyre f-80, spre tyre f-70, spre tyre ftc-13, spre tyre ftc-14, s.t. stud 10 x 7/90

Baghpat, Uttar Pradesh, India

BID NOW

15 |

Bid Value:
₹ 38.90 Lakh |

EMD:
₹ 77.90 K |

21-05-2025 3 Days Left
|

T247 ID- 86968418 |

corrigendum : work proposal for refurbishment of complete rotor assembly alongwith replacement with new rotor shaft and plummer blocks of ring granulator

Umaria, Madhya Pradesh, India

BID NOW

16 |

Bid Value:
₹ 38.48 Lakh |

EMD:
₹ 14.64 K |

20-05-2025 2 Days Left
|

T247 ID- 88105424 |

procurement of spares for shanthi make gearbox of modelsbh250 sbh320 and hb092 - complete casing, part no. - hbo9212100123 , inputpinion shaft, part no. - sbh250f1 212200121 , inputshaft with matching gear for gear, part no. -sbh320fo2 , 1st intermediate shaft with matching gear, part no. - sbh320fo3 , complete casing - upperand lower, part no. - sbh250f1212200126 , solidoutput shaft to be fitted with out, part no. -sbh320f4 complete casing, part no. - hbo9212100123, inputpinion shaft, part no. - sbh250f1 212200121, inputshaft with matching gear for gear, part no. - | quantity - 7

Korba, Chhattisgarh, India

BID NOW

17 |

Bid Value:
₹ 37.78 Lakh |

EMD:
₹ Refer Docs |

19-05-2025 1 Day Left
|

T247 ID- 88052915 |

corrigendum : supply of spares for bh100 dumper - body pad part no 959bd03129 , rubber part no59da60019 , battery terminal positive part no cet0401175 , output shaft assy part no 959da02047 ,bearing part no 0604006219 , filter element part no953oc11414 | quantity - 124

Ramgarh, Jharkhand, India

BID NOW

18 |

Bid Value:
₹ 28.25 Lakh |

EMD:
₹ 56.00 K |

02-06-2025 15 Days Left
|

T247 ID- 88028755 |

procurement ip shaft sealing assembly for oh of unit no 9 2x250mw dtps htps kasimpur

Aligarh, Uttar Pradesh, India

BID NOW

19 |

Bid Value:
₹ 28.07 Lakh |

EMD:
₹ Refer Docs |

04-06-2025 17 Days Left
|

T247 ID- 88356273 |

procurement of sct pump for mcl basundhara area - spacer between impeller bronze , split lantern ringbronze , inter stage bush bronze , ball bearingsteel , key coupling , key impeller , gasket forcasing halves , set of o rings for sct 200 58 by 2 , gland packing , gland plate , gland ss , shaft sleevebronze , bearing housing unit , bearing cover defor sct 200 by 58 2 pump , lock washer for bearingfor sct 200 by 58 2 , casing wear ring ss , neck ringss , pump shaft ss | quantity - 86

Sundergarh, Orissa, India

BID NOW

20 |

Bid Value:
₹ 24.26 Lakh |

EMD:
₹ Refer Docs |

22-05-2025 4 Days Left
|

T247 ID- 88372900 |

work servicing, maintenance and procurement of accessories and spares for 6 nos radial gates, 1 (one) no surge shaft gate, 1 (one) no trt gate, 2 (two) nos draft tube gates at new umtru hydro electric project, mepgcl, dehal, byrnihat

Shillong, Meghalaya, India

BID NOW

21 |

Bid Value:
₹ 23.96 Lakh |

EMD:
₹ Refer Docs |

28-05-2025 10 Days Left
|

T247 ID- 88487336 |

supply of spares for vishwa make 90 kw gear box pac bid - input shaft oil seal for 1000mm vishwa part no 9 ,input shaft part no 1090 , input pinion shaft bearingpart no 1490 , output shaft part no 3890 , first stage gear and pinion in set part no 111890 , 2ndstage gear and pinion in set part no 222690 ,equalizing gear in set of 2 nos part no 5290110 | quantity - 14

Nagpur, Maharashtra, India

BID NOW

Exclusive BOQ Insights & Leads For “spring pins”

Discover opportunities to connect with over 10,000 verified buyers today

View Supply Leads

Tender247

A unit of I-sourcing Technologies Pvt. Ltd.

Tender247.com is India's #1 Tender Portal which provides Tenders, Tender Results Information, Competitor Analytic Reports, Bid Management services. The portal provides a platform for finding Joint Venture or Consortium Partner and also provides bid consultancy and other relevant services to help contractors in winning tenders.

Services

Connect with Us
LinkedinFacebookInstagram
Browsers supported: IE9 & Above, Chrome 44 +, Firefox 44 +
Copyright © 2017 tender247.com. All rights reserved. Terms & Conditions | Privacy Policy
whatsapp