1 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

26-05-2025 9 Days Left
|

T247 ID- 88100084 |

supply of - 2.0 tr capacity reciprocating compressor | quantity - 35

Neyveli, Tamil Nadu, India

INSIGHTS : BY COUNT

Please wait. AI is bringing Insights Matrix.

2 |

Bid Value:
₹ Refer Docs |

EMD:
₹ 1.00 Lakh |

19-05-2025 2 Days Left
|

T247 ID- 88142724 |

supply of - reciprocating co2 compressor k-1 , reciprocating co2 compressor 3rd. , reciprocating co2 compressor 4th ,reciprocating co2 compressor discharge | quantity - 15

Nangal, Punjab, India

3 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

22-05-2025 5 Days Left
|

T247 ID- 88183479 |

sg/b933-016-ka-mr-5410/21 - adequacy check and revamp of compressor-reciprocating (special purpose process)

Gurgaon, Haryana, India

4 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

17-05-2025 Ending Today
|

T247 ID- 88261825 |

expert supervision services for maintenance of nuovo pignone make reciprocating compressors installed in guwahati refinery

Guwahati, Assam, India

5 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

31-05-2025 14 Days Left
|

T247 ID- 88282501 |

supply of - hermetically sealed reciprocating compressor (make:emerson, brandcopeland) for swas chiller of ctps | quantity - 2

Bokaro, Jharkhand, India

Explore BOQ Based Supply Opportunities for “reciprocating compressors”

Reach 10K+ Government Contractors Searching for “reciprocating compressors” Supplier

Discover Opportunities

6 |

Bid Value:
₹ Refer Docs |

EMD:
₹ 2.50 Lakh |

06-06-2025 20 Days Left
|

T247 ID- 88478705 |

3 years rate contract for maintenance of reciprocating compressors in bpcl kr

Kochi, Kerala, India

7 |

Bid Value:
₹ 10.89 Cr. |

EMD:
₹ 32.66 Lakh |

26-05-2025 9 Days Left
|

T247 ID- 88419829 |

supply of goods, machine tools & equipment for an international standard itot in mechanic diesel engine (md) trade at iti bardoli - 1 auto electrical testbench set 1 2 starter motor assembly set 1 3 new airconditioned crdi vehicle in running conditionlmv nos. 1 4 diesel enginecrdi -4stroke can use the used /nonfunctional engine/ refabricated engine set 1 5 diesel engine(running condition)stationary type nos. 1 6 discrete component trainer/basic electronics trainer set 1 7 new heavy commercial vehicle (without body on frame) nos. 1 8 new working condition of diesel engine crdi, 4stroke, 4 cylinder engine, assly nos. 1 9 cut section of 4- and 6-cylinder diesel engine with moving condition nos. 1 10 fuel injection test bench set 1 11 electrical testbench set 1 12 new automobile diesel engine six cylinder in running condition nos. 1 13 common rail diesel fuel injector testing bench set 1 14 common rail pump test bench set 1 15 cylinder reboring machine set 1 16 wireless obd2 car code reader scan tool set 2 17 vertical engine head and engine top surface grinding machine set 1 18 crankshaft grinding machine set 1 19 electric engine lifting crane-1250kg set 1 20 hydraulic engine lifting crane nos. 1 21 electric valve grinding machine set 1 22 four cylinder four stroke diesel engine test rig with rope brake dynamometer nos. 1 23 exhaust gas analyzer - diesel nos. 1 24 turbo charger cut model full assembly with housing assembly of diesel engine nos. 1 25 radiator full cut model assembly with housing & fan assembly of diesel engine nos. 1 26 air conditioner full cut model assembly with housing & ac condenser 27 hydraulic power steering full cut model assembly with housing attachment nos. 1 28 engine wire harness connected complete with electrical equipment nos. 1 29 diesel fuel quality test equipment set nos. 1 30 training setup for adas systems set 1 31 4-wheel alignment set & hoist with advanced driver assistance systems (adas) set 1 32 training system for sensors in motor vehicles nos. 1 33 training system for the basics of pulse generation and ignition in vehicles nos. 1 34 training system: common rail diesel injection system nos. 1 35 air blow gun with standard accessories nos. 3 36 ammeter dc with external shunt nos. 13 37 air ratchet with standard accessories nos. 6 38 air impact wrench with standard accessories nos. 6 39 angle plate adjustable nos. 1 40 angle plate nos. 2 41 anvil with stand no 1 42 batterycharger nos. 2 43 blow lamp nos. 2 44 belt tensioner gauge no 1 45 car jet washer with standard accessories no 1 46 chain pulley block capacity with tripod stand no 1 47 compression testing gauge suitable for diesel engine with standard accessories nos. 2 48 connecting rod alignment fixture nos. 1 49 cylinder bore gauge set 4 50 cylinder liner-dry& wet liner, press fit & slide fit liner each 1 51 dc ohmmeter nos. 2 52 depth micrometer nos. 4 53 dial gauge nos. 4 54 different type of engine bearing model set 1 55 different type of piston model set 1 56 drill twist (various sizes) nos. 4 57 electric soldering iron each 2 58 engineers stethoscope nos. 1 59 fuel feed pump for diesel nos. 1 60 fuel injection pump(diesel)inline nos. 1 61 fuel injection pump dismantling toolkit /universal vice nos. 1 62 fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps each 1 63 glow plug tester nos. 2 64 granite surface plate with stand and cover nos. 1 65 hand reamers adjustable set 2 66 hand shear universal 67 injectormulti hole type, pintle type each 4 68 injector cleaning unit nos. 1 69 injector testing set(hand tester) nos. 1 70 lifting jack screw each 1 71 magneto spanner set with 8spanners set 1 72 marking out table nos. 1 73 multimeter digital nos. 5 74 oil pump for dismantling and assembling. nos. 2 75 oscilloscope nos. 2 76 outside micrometer nos. 2 77 outside micrometer nos. 2 78 outside micrometer nos. 1 79 outside micrometer nos. 1 80 piston ring compressor nos. 2 81 piston ring expander and remover. nos. 2 82 piston ring groove cleaner. nos. 1 83 portable electric drill machine nos. 1 84 punch letter 4mm(number) sets 2 85 radiator cut section-crossflow nos. 1 86 radiator cut section-downflow nos. 1 87 radiator pressure cap nos. 2 88 right cut snips nos. 2 89 rivet sets snap and dolly combined nos. 2 90 set of stock and dies with die stock-metric set 2 91 tinmans shear nos. 2 92 sheet metal gauge nos. 2 93 tinmans shear nos. 4 94 soldering copper nos. 2 95 solid parallels in pairs (different size) in metric set 2 96 straight edge gauge2ft. nos. 2 97 straight edge gauge4ft. nos. 2 98 stud extractor set sets 2 99 stud remover with socket handle nos. 1 100 surface gauge with dial test indicator plunger type nos. 4 101 tachometer (counting type) nos. 1 102 tandem master cylinder with booster nos. 4 103 telescope gauge nos. 4 104 temperature gauge with sensor nos. 2 105 thermostat nos. 2 106 timing lighter nos. 2 107 torque wrenches each 1 108 trammel nos. 2 109 turbo charger cut sectional view nos. 1 110 tyre pressure gauge with holding nipple 111 universal puller for removing pulleys, bearings nos. 1 112 vblock75 x38 mm pair with clamps nos. 2 113 vacuum gauge nos. 2 114 valve lifter nos. 1 115 valve spring compressor universal nos. 1 116 vernier calliper nos. 4 117 vice grip pliers nos. 2 118 water pump ford is mantling and assembling nos. 4 119 wire gauge(metric) nos. 2 120 workbench with vice and drawers nos. 4 121 arbor press hand operated 2 ton capacity nos. 1 122 bench lever shears nos. 1 123 drilling machine bench to drill nos. 1 124 dual magnetization yoke set 1 125 grinding machine pedestal (general purpose) nos. 1 126 hydraulic jack hi-lift each 1 127 liquid penetrate inspection kit set 1 128 multi scan tool nos. 1 129 pipe bending machine (hydraulic type) nos. 1 130 pneumatic rivet gun with standard accessories nos. 2 131 spring tension tester nos. 1 132 tin smiths bench folder nos. 1 133 trolley type portable air compressor nos. 1 134 battery-smf nos. 10 135 drill twist(assorted) nos. 25 136 hydrometer nos. 8 137 special tools and equipment set 1 138 hydraulic vertical honing machine for engine cylinder and brake bore nos. 1 139 pneumatic valve seat grinder and lapping kit nos. 1 140 intercooler cut model assembly with air filter & housing assembly diesel engine nos. 1 141 work benches with bench vices and storage draws to demonstrate machines nos. 1 142 dg set set 1 143 engineering drawing trainees tool kit set 26 144 air conditioner nos 1 145 air conditioner nos 4 146 allen key set of 12 pieces nos. 26 147 caliper inside with spring nos. 26 148 caliper outside with spring nos. 26 149 center punch. nos. 26 150 dividers with spring nos. 26 151 electrician screwdriver nos. 26 152 hammer ballpeen with handle 153 hands file for second cut flat nos. 26 154 philips screwdriver set of 5pieces nos. 26 155 pliers combination nos. 26 156 screwdriver blade nos. 26 157 screwdriver blade nos. 26 158 scriber nos. 26 159 spanner d.e. set of 12pieces nos. 26 160 spanner, ring set of 12 nos. 26 161 spanners socket with speed handle, t-bar, ratchet and universal set of 28 pieces nos. 26 162 steel rule nos. 26 163 steel tool box with lock and key(folding type) nos. 26 164 wire cutter and stripper nos. 26 165 adjustable spanner (pipe wrench) nos. 6 166 allen key set of 12pieces nos. 6 167 caliper inside with spring nos. 4 168 caliper outside with spring nos. 4 169 chisel flat nos. 4 170 chisel crosscut nos. 4 171 circlip pliers expanding and contracting each 4 172 clamps c nos. 2 173 clamps c nos. 2 174 clamps c nos. 2 175 cleaning tray nos. 4 176 copper bit soldering iron nos. 4 177 dividers with spring nos. 4 178 drift punch copper nos. 4 179 drill point angle gauge nos. 1 180 electric testing screwdriver nos. 4 181 engineers square nos. 4 182 feeler gauge 20blades (metric) nos. 4 183 file flat, bastard nos. 4 184 file, half round, second cut nos. 4 185 file, square second cut nos. 4 186 file, square round nos. 4 187 file, triangular, second cut nos. 4 188 files assorted sizes and types including safe edge file(20nos) set 2 189 flat file, second cut nos. 4 190 flat file, bastard nos. 4 191 grease gun nos. 2 192 grease gun heavy duty trolley type nos. 1 193 growler nos. 2 194 hacksaw frame nos. 10 195 hammer ball peen 196 hammer chipping nos. 5 197 hammer copper with handle nos. 4 198 hammer mallet nos. 4 199 hammer plastic nos. 4 200 hand operated crimping tool each 2 201 hand vice nos. 2 202 hollow punch set of seven pieces set 2 203 insulated screwdriver nos. 4 204 insulated screwdriver nos. 4 205 left cut snips nos. 4 206 magnifying glass nos. 2 207 oilcan nos. 4 208 philips screwdriver set of 5pieces nos. 2 209 pipe cutting tool nos. 2 210 pipe flaring tool nos. 2 211 pliers combination nos. 2 212 pliers flat nose nos. 2 213 pliers round nose nos. 2 214 pliers side cutting nos. 2 215 prick punch nos. 4 216 scraper flat nos. 2 217 scraper half-round nos. 2 218 scraper triangular nos. 2 219 scriber nos. 2 220 scriber with scribing block universal nos. 2 221 spanner clyburn nos. 1 222 spanner d.e. set of 12pieces nos. 4 223 spanner t. flocks for screwing up and up- screwing in accessible nos. 2 224 spanner, adjustable nos. 2 225 spanner, ring set of 12 metric sizes nos. 4 226 spanners socket nos. 2 227 spark lighter nos. 2 228 spark plug spanner nos. 2 229 steel measuring tape nos. 4 230 steel rule 15cm inch and metric nos. 4 231 steel rule 30cm inch and metric nos. 4 232 taps and dies complete sets(5types) set 1 233 taps and wrenches-metric sets 2 234 thread pitch gauge metric nos. 2 235 leather apron nos. 5 236 safety glasses nos 25 237 laptop with latest configuration pre-loaded with windows os and msoffice nos. 1 238 lcd projector with screen

Bardoli, Gujarat, India

8 |

Bid Value:
₹ 10.05 Cr. |

EMD:
₹ 6.53 Lakh |

29-05-2025 12 Days Left
|

T247 ID- 87797514 |

overhauling and repairs of knorr bremse make compressor, model no- vv120 of ac dc siemens coaches and bombardier transportation coaches, qty- 144 nos

Mumbai, Maharashtra, India

9 |

Bid Value:
₹ 8.03 Cr. |

EMD:
₹ 6.51 Lakh |

21-05-2025 4 Days Left
|

T247 ID- 88176811 |

installation of psagenerator unit for n2 to process units on rental basis operation and maintenance of gas compressorstation

Chennai, Tamil Nadu, India

10 |

Bid Value:
₹ 5.79 Cr. |

EMD:
₹ Refer Docs |

19-05-2025 2 Days Left
|

T247 ID- 88489357 |

custom bid for services annual repair contract for miscellaneous hot and cold jobs as well as support services for rotary equipments mechanical maintenance jobs at etp old new ttpro ohcuct area of haldia refinery-supply 1. plates, pipes & pipe fittings, valves, gaskets, fasteners, nuts & bolts/studs, gland packing, nozzles, lube oils, grease shall be provided as free issue materials. however, contractor has to keep the record of all the materials issued to them for reconciliation purpose. 2. special tools & tackles including lifting & measuring tools, if available shall be supplied by iocl on returnable basis for carrying out the maintenance jobs on equipment. however, hand drill m/c, drill bits, pneumatic drill m/c and small grinding m/c shall be arranged by contractor and deputed manpower should be capable of using them for minor jobs. 3. major maintenance spares of rotary equipments like motor bearing, power cables, control cables, battery bank cell, equipment spares, conveyor rollers/ belt, valve spares etc. shall be provided by iocl as per requirement. all the spares required for undertaking the maintenance jobs on rotary equipment like bearings and mechanical seal components shall be provided as free issue items. however contractor has to make arrangement to get the material issued from stores. 4. machining of the rotary equipment components shall be in iocl's scope but co-ordination with the owners workshop or local outside workshop shall be done by contractor. 5. drawings, documents and other required data shall be provided, if required, depending upon availability of the same. iocl shall allocate and provide open space for office/ check and change room of contractor's resources as per gcc/scc. however, development of required facility shall be the responsibility of the contractor. alternatively, contractor may place container/ porta-cabin at the allocated site inside the refinery premises, scope of rotary mechanical maintenance works- 1. centrifugal/ dosing pumps, a) obtaining clearance from maintenance and production to commence the work, b) observation and probable reasons of abnormality, c) coupling guard removal., d) dismantling & removal of coupling, e) removal of all connecting piping and instruments with proper tagging, f) dismantling of suction and discharge lines, g) dismantling of foundation bolts, h) removal and transporting of pump (to & fro) to the working place / workshop, i) blinding of suction and discharge lines after removal of pumps from the position, j) dismantling of the pump at workshop / site, k) recording of all observations and abnormalities, l) cleaning of all parts for inspection before assembly, m) repair / replacement of the worn-out / damaged components, n) assembly of the pump / sub components, o) dismantling and assembly of mechanical seal, p) renewal of gland packing in the stuffing box, q) dismantling and assembly of bearings, r) hydraulic testing of the pump, s) pump installation and de-blinding of the suction and discharge lines (clearance must be, taken from production department before de-blinding), t) alignment with motor/turbine including disconnection of motor terminal if required, u) coupling of pump with motor / turbine, v) fixing of the coupling guard, w) startup of the pump, x) data entry of all the activities in computer, y) updating equipment maintenance history card and am-15 form., z) maintenance report to be submitted within 3 days as per iocl format etc, 2. reciprocating compressor, a) obtaining clearance from production for maintenance work, b) ensuring isolation of the equipments from gas, oil and water piping, c) dismantling of instruments, d) decoupling the machine, e) dismantling of loader / unloader, suction & discharge valves, f) opening of the cylinder end cover 6. dismantling of piston sealing assemblies from both gas, and oil sides, g) disconnection of piston from the cross head, h) removal of piston, i) dismantling and removal of small & big end bearings, main bearings, connecting rod, gudgeon, pin, counter weight, crank shaft, all oil piping, oil strainers, oil pumps, oil seals etc, j) cleaning and inspection of all components, k) replacement and repair the components if required, l) reassembly of the crankshaft, main bearings, m) reassembly of connecting rod, big end bearings, n) reassembly of oil pump, oil piping, oil strainer, o) reassembly gudgeon pin, small end bearings, crosses head bearings, p) piston and cylinder assembly, q) assembly of oil and gas piston seals, r) cylinder end cover assembly, s) all clearances are to be kept as per the manufacturer's recommendation in manual, t) suction and discharge valve assembly, testing & installation, u) loader / unloader installation, v) repair / replacement of spares as per requirements (spares to be supplied by iocl), w) coupling, safety guards installation, x) commissioning and cleaning the area etc., 3. air fin cooler, a) obtaining clearance to start the work, b) removal of safety guard, c) dismantling of belt, pulleys, gearbox as applicable, d) disconnection of motor junction box/terminal, e) removal of motor, f) motor maintenance, if required, g) motor bearing replacement, h) preventive maintenance of motor, i) blade replacement, j) blade angle adjustment, k) bearing replacement of fan, l) reassembly and alignment of motor, m) preventive maintenance of fan, n) belt/ coupling installation & alignment, o) repair / replacements of spares as per requirements (spares to be supplied by iocl), p) completion of assembly and trial run, 4. cooling tower fan, a) obtaining clearance to start the work, b) removal of safety guard, c) dismantling of coupling, d) disconnection of motor junction box/terminal, e) removal of motor, f) motor bearing replacement, g) preventive maintenance of motor, h) blade replacement, i) blade angle adjustment, j) bearing replacement of fan, k) preventive maintenance of fan, l) gearbox maintenance/ replacement, m) preventive maintenance of gear box, n) installation and alignment of motor and gearbox, o) installation of coupling, p) repair / replacements as per requirements (spares to be supplied by iocl), q) witness for the trial run, 5. centrifugal compressor, a) obtaining clearance to start the work, b) oil system filter cartridge replacement / cleaning, c) preventive maintenance of lube oil system (including pumps, strainer, srvs, accumulators, etc.), d) assisting during the gas seal replacement jobs in presence of manufacturers expert, e) assisting during complete overhauling of compressor in presence of manufacturer's, representative, f) preventive maintenance of gas seal system including differential pressure control valves,, srvs etc, g) replacement spares will be supplied by iocl, 6. turbine, a) obtaining clearance to start the work, b) isolation of machine by closing valves, putting blinds etc, c) governor oil strainer cleaning / replacements, d) governor system cleaning and flushing, e) turbine barring system maintenance, f) assistance during complete overhauling of turbine in presence of manufacturer's, representative. however if manufacturers representative is not available then the foreman and, technicians must be able to carry out overhauling job. for ohcu-ct cooling water pump drive, turbine, support of oem is not available., g) assisting during bearing replacement / maintenance job in presence of manufacturer's, representative, h) spares will be supplied by iocl., i) assistance to assemble the machine and witness for trial run., 7. agitators/ mixture., a) obtaining clearance to commence the work., b) preventive maintenance of agitators / mixtures, c) replacement of mechanical seal, bearings etc., d) repair/ replacement of spares (spares to be supplied by iocl), e) overhauling of agitators and mixtures etc ., f) assembly and trial run of the agitator., 8. idfan / fd fans / blowers, a) collection of clearance to commence the work, b) preventive maintenance of id / fd fans, blowers etc, c) predictive maintenance of id / fd fans, blowers etc, d) bearing replacement, e) oil system maintenance, f) rotor dismantling and assembly, g) motor alignment and coupling, h) hydraulic coupling / coupling maintenance, i) repair/ replacement of spares (spares to be supplied by iocl), 9. gear box (installed in rotary equipment), a) preventive maintenance of gearbox, b) bearing replacement of gearbox, c) overhauling of gearbox, d) back lash checking of gearbox, e) oil replacement, cleaning and inspection in the gearbox, f) replacement of spares to be supplied by iocl, g) assembly of the gearbox and trial run of the machines.

Midnapore, West Bengal, India

11 |

Bid Value:
₹ 4.12 Cr. |

EMD:
₹ 4.12 Lakh |

11-06-2025 25 Days Left
|

T247 ID- 88419551 |

underwater treatment of u/s surface by epoxy putty and epoxy base grout materials of damanganga reservoir project-1. surface cleaning and removal of loose material algae deposition for the spillway masonry surface including divers & men power, machineries, diving equipment's, air compressors, boat/pontoon, materials etc. complete in all respects. 529.28 sqmt. 2. engaging divers for identifying the source of entry of water into masonry non overflow section on the upstream side under water by injecting dye and marking/plugging temporarily with teflon pegs, under water videography of submerged structures including cost of divers, equipment hire charges, small tools and plants, insurance, taxes duties, transportation charges etc. complete with all lead & lifts, loading and unloading and as directed by the engineer-incharge. 5292.83 sqmt. 3. providing and fixing of 12 mm dia nozzles up to a depth of 250 mm, at interval of 1000 mm in the joints, suction points, honeycomb, crack, surface deformation and other defects areas including divers & men power, machineries, diving equipment's, air compressors, boat/pontoon, materials etc. complete in all respects.direction of engineer in charge. 1059.00 no. 4. providing and sealing of suction or leakage points with grouting of aggregate including material including divers men power, machineries, diving equipment's, air compressors, bost/pontoon, materials ate, complete in all respects tools & tackles, boat necessary platform complete in all respect as per directions of manufactures guidelines and emgineer in charge. 10000.00 kg. 5. providing and souling of suction and leakage points by prouting of underwater seming cementations free sow grout (polygrout l/w or equivalent) including materials, divers, diving equipments, manpower, compressor, tools and tackles, boat, necessary platium, complate in all respect. 15885.00 kg. 6. providing and injection grouting through pre-fix nozzles in the joints,suction points,honeycomb,crack,surface deformation and other defects armas with underwater setting epoxyresin (sika/mbcc/mc) grout including divers & men power, machineries, diving equipment's, air compressors, bost pomson, materials etc, complete in all respects 5295.00 kg. 7. application of twe component, solvent free, moisture insensetive epoxy resin putty sikagard 694 f(1) or equivalent technical specification for the treatment of cracks, honeycombs (upto 10 mm thickness) and other defective area 2037.74 kg. 8. providing and sealing of vertical block joints, horizontal lift joints, cracks with underwater epoxy putty(sika/mbcc/mc) including opening of joints, cleaning, sealing, post repair videography including all material, manpower, diver, diving equipment, compressor, tools & tackles, and chisel machines, necessary platform, boat complete in all respect. 674.63 rmt.

Valsad, Gujarat, India

Access BOQ leads for “reciprocating compressors”

Connect with more than 10K verified Buyers for “reciprocating compressors”

Explore Buyers

13 |

Bid Value:
₹ 1.70 Cr. |

EMD:
₹ 1.70 Lakh |

17-06-2025 31 Days Left
|

T247 ID- 88454980 |

refurbishment of pump house, air compressor, air dryer and cooling tower at shastri park depot.

New Delhi, Delhi, India

16 |

Bid Value:
₹ 99.44 Lakh |

EMD:
₹ 1.99 Lakh |

24-05-2025 7 Days Left
|

T247 ID- 88042972 |

overhauling of main compressor of air generation and treatment unit (agtu) of three phase memu at memu car shed, brcy for 02 years.

New Delhi, Delhi, India

17 |

Bid Value:
₹ 90.00 Lakh |

EMD:
₹ Refer Docs |

26-05-2025 9 Days Left
|

T247 ID- 87156890 |

corrigendum : procurement of 6nos of 40hp high discharge air compressors screw type

Kothagudem, Telangana, India

19 |

Bid Value:
₹ 86.13 Lakh |

EMD:
₹ Refer Docs |

19-05-2025 2 Days Left
|

T247 ID- 88324773 |

procurement of spares for atlas copco make conveying air compressor model za 6j installed in ahp 1x500 unit no. 5 sgtpsbirsinghpur.

Umaria, Madhya Pradesh, India

20 |

Bid Value:
₹ 86.00 Lakh |

EMD:
₹ 1.72 Lakh |

29-05-2025 12 Days Left
|

T247 ID- 88189208 |

facility management services - lumpsum based - residential; o&m of electrical work, maintenance of air conditioning system equipments of common areas at plant site; consumables to be provided by service provider (inclusive in contract cost)-1 carrying out preventive maintenance of following air-conditioning units. pm checks shall be carried out at once in four months (two times a year and third pm is replaced by pm with water servicing). for detailed item description refer technical specification., 1.1 window type ac units & split type ac units up to 2.0 ton, 1.2 duct type / tower type ac units up to 7.5 ton, 1.3 water coolers / deep freezer. , 2 carrying out preventive maintenance including water servicing of following air-conditioning units. pm checks including water servicing shall be carried out once in a year after completion of eight months of servicing (i.e. during 3rd pm checks). for detailed item description refer technical specification., 2.1 window type ac units & split type ac units up to 2.0 ton, 2.2 duct type / tower type ac units up to 7.5 ton, 2.3 water coolers / deep freezer etc. , 3 carrying out preventive maintenance of refrigerator units. pm checks shall be carried out once in a year. for detailed item description refer technical specification., 4 carrying out preventive maintenance of package / ductable air conditioner units above 7.5 tr and upto 14 tr capacity, located at wmp, server room, ntc etc. pm checks shall be carried out once in two months. for detailed item description refer technical specification., 5 carrying out preventive maintenance of vrf air conditioner units up to 14 tr capacity, located at pass section, wano room, ntc etc. pm shall be carried out once in two months. for detailed item description refer technical specification., 6 carrying out break down maintenance of air-conditioning units as instructed by engineer-in-charge or his representative for the following equipments. (this items will be only executed against breakdown of existing equipment). for detailed item description refer technical specification., 6.1 window / split type a/c units up to 2.0 ton, 6.2 duct type / tower type ac units up to 7.5 ton, 6.3 water coolers / fridge/ deep freezer , 6.4 vrf ac 14 tr, 6.5 pac up to 11 tr, 7 installation and commissioning of various capacity refrigerators / water coolers. for detailed item description refer technical specification. (this items will be only executed as & when required)., 8 removal / dismantling of up to 2 tr capacity split air-conditioning units. for detailed item description refer technical specification. (this items will be only executed as & when required)., 8.1 out door unit, 8.2 indoor unit, 9 installation of up to 2 tr capacity split air conditioning units. for detailed item description refer technical specification. (this items will be only executed as & when required)., 9.1 out door unit, 9.2 indoor unit, 10 removal & installation of window type ac unit at location shown by engineer in charge. (this items will be only executed as & when required). for detailed item description refer technical specification., 10.1 removal, 10.2 installation, 11 installation of compressors includes removal of faulty compressor, transportation, installation, testing and commissioning of compressors in the existing pac / sac / wac / tac / dac/ vrf / water cooler / refrigerator. for detailed item description refer technical specification. (this items will be only executed as & when required)., 11.1 sac / wac / tac / wc / refrigerator., 11.2 pac / dac / vrf, 12 leak testing, leak identification, brazing, vaccumizing, gas charging. supply of consumables & suitable gas to complete the above jobs are in the scope of contractor. for detailed item description refer technical specification. (this items will be only executed as & when required)., 12.1 for upto 2 ton capacity window & split type a/c units etc. , 12.2 for various capacity of water cooler / deep freezer., 12.3 for refrigerators. , 12.4 for & upto 7.5 ton capacity dac. , 12.5 for & upto 11 ton capacity pac. , 12.6 for & upto 14tr vrf, 13 rewinding / repair of blower / condenser motor of various air conditioning / refrigeration equipments with suitable gauge super enameled copper conductor winding wire and complete repair. for detailed item description refer technical specification. (this items will be only executed as & when required)., 13.1 1.5 / 2.0 ton window ac, 13.2 blower fan motor for split type / duct / vrf ac's, 13.3 condenser fan motor for split type / duct ac's, 13.4 fan motor for water cooler , 13.5 package ac / vrf ac unit condenser fan motor., 13.6 package ac unit blower fan motor, 14 supply of following accessories for 1.5 / 2.0 / 2.5 ton window ac / split ac / water cooler / refrigerator / deep freezer / pac / vrf units as per tender specifications. (the items shall be supplied only against failure of existing items), 14.1 running capacitor 2.5 mfd / 4 mfd / 6 mfd, 14.2 running capacitor 8 mfd / 10 mfd / 15 mfd , 14.3 running capacitor 25 mfd / 36 mfd, 14.4 running capacitor 45 mfd / 50 mfd, 14.5 starting capacitor 40-60 mfd or 60-80 mfd, 14.6 starting capacitor 80-100 mfd / 100 - 120 mfd, 14.7 starting capacitor 120 - 150 mfd, 14.8 starting relay for wac / sac, 14.9 starting relay for wc / deep freezer, 14.10 compressor foundation rubber bushes for pac / dac, 15 supply of following accessories for 1.5 / 2.0 ton window type ac units as per tender specifications. (the items shall be supplied only against failure of existing items), 15.1 thermostat with knob , 15.2 strainer and capillary , 15.3 condenser fan blade , 15.4 blower fan blade , 15.5 air filter pvc / woven type for wac, 15.6 on / off selector switch, 15.7 over load protector, 15.8 blower bushes, 16 supply of following accessories for water cooler complete set of suitable size as per tender specifications. (the items shall be supplied only against failure of existing items), 16.1 strainer and capillary , 16.2 condenser fan blade, 16.3 thermostat with knob , 16.4 relay over load protector, 16.5 condenser fan motor , 16.6 solenoid valve, 16.7 float switch, 16.8 10" spun, 16.9 10" carbon, 16.10 heater coil, 16.11 hot water tank, 17 supply of following accessories for refrigerator as per tender specifications. (the items shall be supplied only against failure of existing items), 17.1 starting relay olp set, 17.2 thermostat , 17.3 strainer and capillary tube, 17.4 timer, 17.5 lamp, 17.6 thermo bimetal relay, 18 supply of following accessories for split type air conditioners upto 2tr capacity. (the items shall be supplied only against failure of existing items). , 18.1 strainer and capillary, 18.2 condenser fan blade, 18.3 blower fan blade , 18.4 remote, 18.5 blower bushes, 18.6 swing motor for indoor units. , 18.7 swing blade set for indoor unit , 18.8 copper condenser coil for outdoor units , 18.9 condenser fan motor (ac) for outdoor units. , 18.10 blower motor (ac) suitable for indoor unit., 18.11 blower motor (dc) suitable for indoor unit., 18.12 condenser fan motor (dc) for outdoor units. , 18.13 supply of electronic circuit board suitable for 1.5 tr / 2.0 tr capacity non inverter type split type air conditioning unit of various make., 18.14 supply of electronic circuit board suitable for 1.5 tr / 2.0 tr capacity inverter type split type air conditioning unit of various make., 18.15 supply of indoor/outdoor sensor suitable for 1.5 tr / 2.0 tr capacity split type air conditioning unit of various make., 18.16 supply of indoor/outdoor display unit suitable for 1.5 tr / 2.0 tr capacity split type air conditioning unit of various make., 18.17 drain pipe, 19 supply of following components for package / vrf air conditioner units located at various locations. (the items shall be supplied only against failure of existing items), 19.1 hp / lp pressure cut out, 19.2 filter dryer suitable for 11tr bluestar / voltas pac units, 19.3 blower motor belt a-25 to a32, 19.4 supply of condenser fan blade suitable for pac, 19.5 supply of blower shaft bearing suitable for 11tr bluestar / voltas pac units, 19.6 air filter suitable for 11tr bluestar / voltas pac units, 19.7 condenser fan motor for outdoor units suitable for 11tr bluestar / voltas pac units. , 19.8 blower motor suitable for 11tr bluestar / voltas pac units., 19.9 indoor display unit for 11tr bluestar / voltas pac units., 19.10 indoor unit pcb for 11tr bluestar / voltas pac units., 19.11 blower motor suitable for vrf units of different models., 19.12 supply of indoor unit pcb suitable for vrf unit., 19.13 supply of outdoor unit pcb suitable for vrf unit., 19.14 supply of sensor suitable for vrf indoor unit, 19.15 supply of sensor suitable for vrf outdoor unit, 19.16 supply of swing motor suitable for vrf indoor units. , 19.17 supply of float switch for drain pump, 19.18 supply of drain pump for indoor cassette units, 19.19 supply of samsung vrf ac outdoor bldc fan motor, 19.20 supply of samsung vrf assy pcb inverteer card set with sensor., 20 supply of compressors for following ac units / water coolers / refrigerators. (the compressors shall be supplied only against failure of existing compressors), 20.1 5tr suitable for dac hermitically sealed , 20.2 5.5 tr (zr-72) suitable for pac, 20.3 upto 2.0tr suitable for wac/sac, 20.4 suitable for water cooler (40 to 60 lph), 20.5 3.0 tr suitable for dac, 20.6 compressor suitable for 14 ton vrf unit. (fixed type), 20.7 compressor suitable for 14 ton vrf unit. (variable type), 21 supply and gas charging of r22 refrigerant gas wherever required for topping up purpose, 22 supply and gas charging of r-134a / 407c refrigerant gas wherever required for toping up purpose., 23 supply and gas charging of r-410 refrigerant gas wherever required for toping up purpose., 24 supply and gas charging of r32 refrigerant gas wherever required for topping up purpose., 25 supply & installation of copper tubes of various sizes for air conditioner units, 25.1 supply & installation of copper tubes of size 1/2 ", 25.2 supply & installation of copper tubes of size 1/4 ", 25.3 supply & installation of copper tubes of size 3/8 ", 25.4 supply & installation of copper tubes of size 5/8 ".

Uttara Kannada, Karnataka, India

Exclusive BOQ Insights & Leads For “reciprocating compressors”

Discover opportunities to connect with over 10,000 verified buyers today

View Supply Leads

23 |

Bid Value:
₹ 62.49 Lakh |

EMD:
₹ Refer Docs |

20-05-2025 3 Days Left
|

T247 ID- 87909075 |

customized amc/cmc for pre-owned products - camc of reciprocating air compressors of (capacity upto 20cfm, make: elgi / ir or equivalent) including attending to breakdown calls, preventive maintenance calls, replacement of mandatory and worn out spar.. , customized amc/cmc for pre-owned products - camc reciprocating air compressors (capacity more than 20cfm and upto 60cfm, make: elgi/ir/ parkar or equivalent) including attending to breakdown calls & preventive maintenance calls and replacement of man.. , customized amc/cmc for pre-owned products - camc of lubricating type screw air compressors (capacity more than 60cfm up to 150cfm,make : kirloskar/elgi/ gardner denver or equivalent)- including attending to breakdown calls & preventive maintenance ca.. , customized amc/cmc for pre-owned products - camc of lubricating type screw air compressors (capacity 250cfm,make :kirloskar/elgi or equivalent) including attending to breakdown calls & preventive maintenance calls and replacement of mandatory/worn ou.. , customized amc/cmc for pre-owned products - camc of screw type central air compressors (capacity: 500cfm, make: gardner denver/atlascopco or equivalent)- including attending to breakdown calls & pm calls and replacement of mandatory/worn out spares a.. , customized amc/cmc for pre-owned products - camc of lubricating type screw air compressors (capacity more than 60cfm up to 111 cfm, make: gardner denver or equivalent)- including attending to breakdown calls & pm calls and replacement of mandatory/wo.. , customized amc/cmc for pre-owned products - camc for refrigerated air dryers of (capacity up to 20cfm,make: numek/elgi/sanpar/gardner denver or equivalent) 6 nos including attending to breakdown calls, preventive maintenance calls and replacement of .. , customized amc/cmc for pre-owned products - camc for refrigerant air dryers of (capacity more than 20cfm up to 60cfm, make :numek/ elgi/ sanpar/hiross or equivalent) including attending to breakdown calls, preventive maintenance calls and replacement.. , customized amc/cmc for pre-owned products - camc for refrigerant/desiccant air dryers of (capacity more than 100 cfm up to 200cfm,make: summit / kirloskar / gardner denver) including attending to breakdown calls, preventive maintenance calls and repl.. , customized amc/cmc for pre-owned products - camc for desiccant air dryers of (capacity up to 50 cfm, make: trident/cosmike or equivalent) including attending to breakdown calls, preventive maintenance calls and replacement of mandatory spares as per .. , customized amc/cmc for pre-owned products - camc for refrigerant air dryer of (capacity 600 cfm :make: sanpar) including attending to breakdown calls, preventive maintenance calls and replacement of mandatory spares as per scope of work for 2 years q.. , customized amc/cmc for pre-owned products - camc for refrigerant air dryer of (capacity 1450cfm :make: ultrafilter) including attending to breakdown calls, preventive maintenance calls and replacement of mandatory spares as per scope of work for 2 ye.. , customized amc/cmc for pre-owned products - camc for refrigerant/desiccant air dryers of (capacity more than 100 cfm up to 200cfm : gardner denver) including attending to breakdown calls, preventive maintenance calls and replacement of mandatory spar.. , customized amc/cmc for pre-owned products - as and when requirements establishment or replacement of compressed air pipeline with half inch class c ms pipe along with sutable accessorios removed old pipe line has to deposit at scrap yard as per dir.. , customized amc/cmc for pre-owned products - as and when requirements establishment or replacement of compressed air pipeline with one inch, class c ms pipe along with sutable accessorios removed old pipe line has to deposit at scrap yard as per direc.. , customized amc/cmc for pre-owned products - as and when requirements establishment or replacement of compressed air pipeline with one and half inch ,class c ms pipe along with sutable accessorios removed old pipe line has to deposit at scrap yard as .. , customized amc/cmc for preowned products - as and when requirements establishment or replacement of compressed air pipeline with two inch, class c ms pipe along with sutable accessorios removed old pipe line has to deposit at scrap yard as per direc.. , customized amc/cmc for pre-owned products - as and when requirements establishment or replacement of compressed air pipeline with 3 inch ,class c ms pipe along with sutable accessorios removed old pipe line has to deposit at scrap yard as per directi.. , customized amc/cmc for pre-owned products - as and when requirements establishment or replacement of compressed air pipeline with 4 inch, class c ms pipe along with sutable accessorios removed old pipe line has to deposit at scrap yard as per directi.. , customized amc/cmc for pre-owned products - as and when requirements establishment or replacement of compressed air pipeline with 6 inch,class c ms pipe along with sutable accessorios removed old pipe line has to deposit at scrap yard as per directio.. , customized amc/cmc for pre-owned products - as and when requirements establishment or replacement of compressed air pipeline with 8 inch, class c ms pipe along with sutable accessorios removed old pipe line has to deposit at scrap yard as per directi..

Ranga Reddy, Telangana, India

25 |

Bid Value:
₹ 47.79 Lakh |

EMD:
₹ 1.01 Lakh |

29-05-2025 12 Days Left
|

T247 ID- 88178550 |

reconditioning of pac lp barrel, turbine rotor and synthesis gas compressor drive wk turbine rotor of ammonia-iii plant

Dibrugarh, Assam, India

26 |

Bid Value:
₹ 46.00 Lakh |

EMD:
₹ 92.00 K |

28-05-2025 11 Days Left
|

T247 ID- 88238843 |

comprehensive maintenance repairs to crane hoists and control panels of hangar doors air compressor and allied works at certain labs under ge i r and d east bangalore

Bangalore, Karnataka, India

Tender247

A unit of I-sourcing Technologies Pvt. Ltd.

Tender247.com is India's #1 Tender Portal which provides Tenders, Tender Results Information, Competitor Analytic Reports, Bid Management services. The portal provides a platform for finding Joint Venture or Consortium Partner and also provides bid consultancy and other relevant services to help contractors in winning tenders.

LinkedinFacebookInstagram
Browsers supported: IE9 & Above, Chrome 44 +, Firefox 44 +
Copyright © 2017 tender247.com. All rights reserved. Terms & Conditions | Privacy Policy
whatsapp