1 |

Bid Value:
₹ 1.03 Cr. |

EMD:
₹ 2.07 Lakh |

11-06-2025 10 Days Left
|

T247 ID- 88589880 |

sitc of 1010kva dea set at te bldg mi road jaipur - sitc of dg set capable of delivering minimum 1180 bhp ,pitc of suitable size ms pipe , earthing with gi earth plate ,providing and fixing 25 mm x 5 mm gi strip in 40 mm dia gi pipe , providing and fixing 25 mm x 5 mm gi strip ,supplying and fixing 50mm x 12 mm thick gi earth strip ,dismantling of existing 1010 kva silent dea set , supplyingand making end termination | quantity - 62

Jaipur, Rajasthan, India

BID NOW

INSIGHTS : BY COUNT

Please wait. AI is bringing Insights Matrix.

2 |

Bid Value:
₹ 87.83 Lakh |

EMD:
₹ 1.76 Lakh |

14-06-2025 13 Days Left
|

T247 ID- 88762466 |

supply, delivery and laying of 600mm diameter ms pipeline at both side of 4no. bridge and connections with existing pipeline to improve water supply at eastern side of 4no. bridge in ward no. 59 and 65.

Kolkata, West Bengal, India

BID NOW

3 |

Bid Value:
₹ 38.96 Lakh |

EMD:
₹ 77.92 K |

02-06-2025 1 Day Left
|

T247 ID- 88756423 |

providing and laying 1000mm diameter ms pressure pipe line of storm water drain through trenchless technology across and along new rohtak road (near zakhira flyover zero point), np4 rcc pipe at azad market and chelmsford road under srd-2/sub division

New Delhi, Delhi, India

BID NOW

4 |

Bid Value:
₹ 30.00 Lakh |

EMD:
₹ 30.00 K |

16-06-2025 15 Days Left
|

T247 ID- 88509411 |

supply of rcc pre cast half round pipe for the year 2025-26 under np raghogarh

Guna, Madhya Pradesh, India

BID NOW

5 |

Bid Value:
₹ 23.55 Lakh |

EMD:
₹ 23.60 K |

02-06-2025 1 Day Left
|

T247 ID- 88388062 |

gwssb invites online bids for work of drilling 200 and 250 mm dia. up to 300 meters (total 08 numbers) dr bores by dr drilling rig including supply of various types of ms bore materials & slotting work of ms erw pipes & installation ,testing & commissioning of three phase sub. pump set with required accessories in 200/250 mm dia bores at various villages in various talukas of kheda district on as and when required basis

Kheda, Gujarat, India

BID NOW

Explore BOQ Based Supply Opportunities for “ms pipe”

Reach 10K+ Government Contractors Searching for “ms pipe” Supplier

Discover Opportunities

6 |

Bid Value:
₹ 16.81 Lakh |

EMD:
₹ 33.70 K |

12-06-2025 11 Days Left
|

T247 ID- 88643120 |

supply, installation, connection and commissioning of 08 nos. bore type earth pit along with the work of pipeline for maintaining satisfactory earthing value of all earth pits at 132/33 kv gss mango (baliguma)

Singhbhum, Jharkhand, India

BID NOW

7 |

Bid Value:
₹ 9.63 Lakh |

EMD:
₹ 19.25 K |

12-06-2025 11 Days Left
|

T247 ID- 88771910 |

supply and delivery of 110 nos. lt distribution kiosks for double feederarrangement suitable for 100 kva dtr sub station with configuration of915mm(l)x650mm(h)x450mm(b) dimensions having main structure of35mmx35mmx5mm m.s angle. five sides of the box should be covered by75mmx25mmx3.25mm brc net and top side should be covered by915mmx450mmx18 swg m.s.sheet. on the front side, there should be aprovision for holding shutter and to be rested on 02 nos 12.5mm dia.hollow pipe. structure farm of the folding shutter are to be made with25mmx25mmx5mm m.s.angle. other fittings are to be supported by70mmx3mm m.s.flat for fixing 10 nos aluminium bus bar(03 nos of40x10x250mm, 06 nos of 40x10x125mm & 01 nos of 25x6x250mm)with necessary arrangement for g.i. bolt & al. long barrel dewells make120 sqmm socket, nut, washer including earthing arrangements as perregard of the box. the boxes are to be printed with one coat offered primerand two coats of synthetic enamel grey paint.

Nadia, West Bengal, India

BID NOW

8 |

Bid Value:
₹ 7.96 Lakh |

EMD:
₹ 16.00 K |

04-06-2025 3 Days Left
|

T247 ID- 88642054 |

12 tp project-drilling of state govt tubewell for 1.0 cusec discharge 450mm to 676mm dia bore, lowering of pipe assembly 300mmx150mm dia m.s. pipe with direct/reverse rotary rig machine including required all operations (transportations to feeding pea gravel), t&p and labour required for proper completion of work, excluding the cost of material (pea gravel and pipe assembly with accessories as per required & quantity of hsd oil quoted by firm contractor) provided by the department as above mentioned tubewell site.

Moradabad, Uttar Pradesh, India

BID NOW

9 |

Bid Value:
₹ 7.00 Lakh |

EMD:
₹ 21.00 K |

19-06-2025 18 Days Left
|

T247 ID- 88880844 |

supply of fire fighting system - supply installation testing and commissioning of m s pipe 80mm dia , supply installation testing and commissioning of ms pipe 40 mm dia , supply installation testing andcommissioning of m s pipe 25 mm dia , supply installationtesting and commissioning of q b sprinkler 680c with mssocket 15 mm dia , flexible for sprinkler dropping to falseceiling 1 mtr with crome finish roseate plate ul listed ,supply installation testing and commissioning of electronichooter 25 volt dc operatable made out of abs plastic body500 mtrs , supply installation testing and commissioning of manual call point break glass type , supply installationtesting and commissioning of copper wire 2x1 point 5 mm ,supply installation testing and commissioning conventionaloptical smoke heat detector , supply installation testingand commissioning of single headed fire hydrant valve 63mm dia , supply installation testing and commissioning ofrrl fire fighting hose pipe 63 mm dia , supply installationtesting and commissioning of stainless steel branch pipe 63mm dia , supply installation testing and commissioning of18 gauze single door hose box size 600 by 600 by 250 mm | quantity - 359

Meerut, Uttar Pradesh, India

BID NOW

10 |

Bid Value:
₹ 6.76 Lakh |

EMD:
₹ 10.00 K |

03-06-2025 2 Days Left
|

T247 ID- 88282230 |

supply of mserw pipe - - mserw pipe, medium duty, plain ends, size- 15 nb 0.5inch, wall thickness- 2.65 mm , 2- mserw pipe, mediumduty, plain ends, size- 20 nb 0.75 inch, wall thickness-2.65 mm , 3- mserw pipe, medium duty, plain ends, size- 25 nb, wall thickness- 3.25 mm , 4- mserw pipe, mediumduty, plain ends, size- 32 nb, wall thickness- 3.25 mm , 5-mserw pipe, medium duty, plain ends, size- 40 nb, wallthickness- 3.25 mm , 6- mserw pipe, medium duty, plainends, size- 50 nb, wall thickness- 3.65 mm | quantity - 3000 1

Singhbhum, Jharkhand, India

BID NOW

11 |

Bid Value:
₹ 6.18 Lakh |

EMD:
₹ Refer Docs |

Refer Docs
|

T247 ID- 88919379 |

profile sheet 0.8 mm th isi marked (with zinc coating not less than 275 gm /sqm, plan sheet .8 mm th isi marked (with zinc coating not less than 275 gm, 3 " dia round ms pipe (isi marked), 1.25 " dia round ms pipe, 1.5 "x3" rectanglar ms pipe, angle 2.5"x2.5"x1.5 soot th or 65mmx65mmx5mm), screw 12x55 no 2.25" long with waser, welding rod 10no, enamel paint black, ventilator, window, roller shutters of approved make, made of 80 x 1.25 mm. m.s. laths interlocked together through their entire length , inside and outside locking with push and pull operation ,including cost of spring hooks, wire spring grade no. 2 and m.s. top cover 1.2 mm thick, unplasticzed poly vinal chloride (upvc)pipe type b (is13592 :1992 marked) 110 mm dia, unplasticzed poly vinal chloride (upvc)pipe type b (is13592 :1992 marked) 110 mm dia bend, cutter wheel (5"), air fir 24" with fiber sheet base. (hindi document)

Jaipur, Rajasthan, India

BID NOW

Access BOQ leads for “ms pipe”

Connect with more than 10K verified Buyers for “ms pipe”

Explore Buyers

12 |

Bid Value:
₹ 5.90 Lakh |

EMD:
₹ 11.80 K |

11-06-2025 10 Days Left
|

T247 ID- 88630936 |

custom bid for services - epoxy coating works-carried out.- a. providing and fixing supporting system whereever necessary providing and fixing of double tubular scaffolding / supporting system using hframes with cup lock type using 40 mm dia. m.s. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with m.s. tubes, m.s. tube challis, m.s clamps and m.s staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. the scaffolding /supporting system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the engineer -in - charge. b. epoxy painting. removing of loose plasters, replastering the surface, filling of putty to make the surface even, applying one coat of epoxy primer and two coat of epoxy paint. before primer is applied, holes and undulations, shall be filled up with plaster of paris and rubbed smooth or with wall care putty.the epoxy painting shall be laid on evenly and smoothly by means of crossing and laying off, the later in the direction of the grain . the crossing & laying off consists of covering the area with paint, brushing the surface hard for the first time and then brushing alternately in opposite directions two or three time and then finally brushing lightly in direction at right angles to the same. in this processs, no brush marks shall be left after the laying off is finished. the full process of crossing and laying will constitute one coat. skilled and experienced workmen shall be employed for this class of work. paints used shall be brought to the requisite consistency by adding a suitable thinner. no left over paint shall be put back into the stock tins. the final painted surface shall present a uniform appearance and no streaks, blisters, hair marks from the brush or clogging of paint puddles in the corners of panels, angles of mouldings etc. shall be left on the work. a brush in which paint has dried up is ruined and shall on no account be used for painting work. the containers, when not in use, shall be closed, kept air tight and shall be kept at a place free from dust. the surface shall ordinarily not be painted until it has dried completely. make of primer and paints should be asian paints/burger paints/shalimar or equivalent. scaffolding where ever necessary should be adhered to. the color of the paint should be first got approved by engineer in charge before start of work.

Mumbai, Maharashtra, India

BID NOW

13 |

Bid Value:
₹ 4.03 Lakh |

EMD:
₹ Refer Docs |

10-06-2025 9 Days Left
|

T247 ID- 88771190 |

providing 100mm ms pipe, 250mm and 100mm di sluice valves, 100mm dia di air valve and other relavent specials on palakonda road in the premises of rajam municipality.

Vizianagaram, Andhra Pradesh, India

BID NOW

14 |

Bid Value:
₹ 2.97 Lakh |

EMD:
₹ 5.50 K |

05-06-2025 4 Days Left
|

T247 ID- 88803403 |

modified by cutting, jointing, threading, painting and socketing of old and serviceable 150 mm dia m.s. column pipes for poddarnagar big-dia t/w unit.

Kolkata, West Bengal, India

BID NOW

15 |

Bid Value:
₹ 2.83 Lakh |

EMD:
₹ 5.67 K |

18-06-2025 17 Days Left
|

T247 ID- 88962516 |

supply of base frame, ms pipe and specials with allied accessories for installation of sludge pump no-2 and 4 with allied works at sludge pump house under wtp-i, grww.

Kolkata, West Bengal, India

BID NOW

16 |

Bid Value:
₹ 2.36 Lakh |

EMD:
₹ 4.72 K |

09-06-2025 8 Days Left
|

T247 ID- 88766383 |

providing, laying, jointing, testing and commissioning of 400 mm dia m.s. pipeline 400 mm sluice valve and chamber work at kalani nagar near ankit hotel of zone no.20 ward no.04 (as per schedule)

Indore, Madhya Pradesh, India

BID NOW

17 |

Bid Value:
₹ 1.70 Lakh |

EMD:
₹ 3.40 K |

03-06-2025 2 Days Left
|

T247 ID- 88803879 |

pf and laying of ms pipe 200mm dia sluice valve 16 sqmm submersible cable and all other works contingent thereto near twell no. g 10 in sector 19 panchkula

Panchkula, Haryana, India

BID NOW

18 |

Bid Value:
₹ 1.50 Lakh |

EMD:
₹ Refer Docs |

16-06-2025 15 Days Left
|

T247 ID- 88787563 |

supply of - alttenator assy 5 kva , mcb db box ms 4 way , mcbdouble pole 32 amp , mcb single pole 20 amp ,change over switch 32 amp dp , pvc round pipe 1 inch x 10 inch , u clip 1 inch , flexibe pipe 1 inch ,copper wire 2 point 55 sqmm red blakc , copper wire1 point sqmm red black , eletric board | quantity - 93

East Sikkim, Sikkim, India

BID NOW

19 |

Bid Value:
₹ 1.35 Lakh |

EMD:
₹ 13.50 K |

23-06-2025 22 Days Left
|

T247 ID- 88929447 |

the joint director, govt. quality marketing centre, for engg. goods, jagadhari. list comprising of item - gate valve 4 gm, gate valve 3 gm, gate valve 2.5 brass, nipple 4, nipple 3, nipple 2.5, elbow 4, elbow 3, elbow 2.5, elbow 2, flange 4, flange 3, flange 2.5, bend 4, bend 3, bend 2.5, socket 4, socket 3, socket 2.5, reflex valve 4, reflex valve 3, m.s pipe 2.5, m.s pipe 4, m.s pipe 3, m.s bracket, iron channel, steel almirah, water storage tank, plastic, diesel oil tank, stand for main hole cover, water tank hr sheet, static balancing device, cycle frame tester, panel for pump lab, panel board with stand, voltmeter, ammeter, wattmeter, frequency meter, v-notch 45 degree, brass, hook gauge, 3 phase voltage auto transfer, elect. motor 7.5, 3, & 15 hp, mono block pump without moter, hydro dynamometer with bed, impact testing m/c 30-a, polish make mtl. microscope, profile projector, with access., ultra sonic flow detector -4400, ultra sonic flow detector 65a, bursting strength testing, vickers hardness testing m/c, impact testing m/c for harrow, cooler, safe, type writer, insulation tester, nozzle tester, gear backlash equipment, dial bore gauge, poldi type impact hardness tester, portable hardness tester, name plate, spring balance, spring balance, ampere meter, calculator, aristo & other, measuring tape, torch, scissors, wire cutter, vacuum & pressure gauges, electric motor, tulu pump, adjustable wrench, pipe wrench, dial indicator, saw, stand for dial thick gauge, traveling microscope, comparator stand, venire caliper 14&12, universal surface gauge, feeler gauge, lock pad, soldering iron, spanner set, micrometre 25-50mm, micrometer 0-25mm, micrometer, 0-25mm, temp. gauge, digital temp. indicator, stop watch, plier, torque wrench, pulley 6 & 5, magnet round& b4 cup, pyrometer&kippe apparatus, elect. wall fan, servo controller stabilizer, dissolved oxygen analysis, cylinder, electrochemical analyzer, fire extinguisher, window air condition, hot plate, centrifugal m/c with two tube glass, precision weighing balance, micro processer basic determination unit thickness, eel metaspace for galvano, hot air oven, bacteriological incubator, water bath, water still wall type, trando trendy vacuum cleaner, ph-meter with electrode, air compressor

Panchkula, Haryana, India

BID NOW

20 |

Bid Value:
₹ 64.23 K |

EMD:
₹ 900 |

05-06-2025 4 Days Left
|

T247 ID- 88766905 |

clit cutting, clit welding and flange welding in 6 inch ms pipe for use in submersible pump at dhansar pit of adic under, kusunda area.

Dhanbad, Jharkhand, India

BID NOW

Tender247

A unit of I-sourcing Technologies Pvt. Ltd.

Tender247.com is India's #1 Tender Portal which provides Tenders, Tender Results Information, Competitor Analytic Reports, Bid Management services. The portal provides a platform for finding Joint Venture or Consortium Partner and also provides bid consultancy and other relevant services to help contractors in winning tenders.

Services

Connect with Us
LinkedinFacebookInstagram
Browsers supported: IE9 & Above, Chrome 44 +, Firefox 44 +
Copyright © 2017 tender247.com. All rights reserved. Terms & Conditions | Privacy Policy
whatsapp