1 |

Bid Value:
₹ 261.51 Cr. |

EMD:
₹ 1.18 Cr. |

26-06-2025 26 Days Left
|

T247 ID- 88732633 |

operation & maintenance of dfccil's rgm formation and riv machine including supply of spares and other items for 12 years within dfccil network

Multi Location, Multi State, India

INSIGHTS : BY COUNT

Please wait. AI is bringing Insights Matrix.

3 |

Bid Value:
₹ 36.68 Cr. |

EMD:
₹ 73.40 Lakh |

03-07-2025 33 Days Left
|

T247 ID- 88442289 |

request for proposal (rfp) for selection of agency for installation of de-sliming system at hus (mk unit) on engineering procurement construction (epc) basis

Kanyakumari, Tamil Nadu, India

Explore BOQ Based Supply Opportunities for “machinery repair”

Reach 10K+ Government Contractors Searching for “machinery repair” Supplier

Discover Opportunities

6 |

Bid Value:
₹ 14.70 Cr. |

EMD:
₹ 3.67 Lakh |

02-06-2025 2 Days Left
|

T247 ID- 87684511 |

corrigendum : rprc251117 agency for repair of coke drum 78 r 101 78 r 102 78 r 103 and 78 r 104 bulged portion and skirt in dcu at panipat refiner

Panipat, Haryana, India

7 |

Bid Value:
₹ 3.79 Cr. |

EMD:
₹ 4.74 Lakh |

04-06-2025 4 Days Left
|

T247 ID- 88521731 |

operation and maintenance of other machines and plants - work of contractor for operation, security arrangement of 10mty input coal feeding circuit from truck receiving hoppers (trh) to transfer house th-2 of bhubaneswari chp: maintenance of the 10mty input coal feeding circuit from truck receiving hoppers (trh) to th-2 of bhubaneswari chp is in the scope of m/s m eri t t e ch nologie s india limi t ed as per the contract agreement no. e&m/2022-23/95, dt.18/04/2022. as per clause no.33 of gtc (section-2) of the contract agreement, maintenance including cleaning of the plant for 60(sixty) calendar months (which will commence immediately upon the satisfactory completion of the performance guarantee (pg) test) is under the scope of m/s m eri t te chnol ogie s indi a limi ted (turnkey contractor). thus, the scope of the contractor pertaining to 10mty input coal feeding circuit from trh to th-2 of bhubaneswari chp is given below: 1. the contractor shall carry out operation and security arrangement of the 10mty input coal feeding circuit from trh to th-2 of bhubaneswari chp complying with all statutory & other requirements of law, rules & regulations. 2. complete operation, security arrangement of entire 10mty input coal feeding circuit from truck receiving hoppers to transfer house (th)-2 of bhubaneswari chp (i.e. mechanical, electrical, electronics and communication, control & instrumentation, sub-stations, control rooms, plc, firefighting system, dust suppression system, plant cleaning system, air conditioning, exhaust & ventilation system, water supply etc.). the boundary limit of the 10mty input coal feeding circuit from trh to th-2 of bhubaneswari chp to carry out operation, security arrangement is as follows: a) from receipt of coal at truck receiving hoppers and transportation to th-2 via belt conveyor s1. 3. the scope of the contractor covers the complete operation, security arrangement of the entire 10mty input coal feeding circuit from trh to th-2 of bhubaneswari chp and all the associated systems and sub-systems like power supply, internal and external illumination, control & instrumentation, communication system, dust suppression system, firefighting system, equipment of plant cleaning systems, pressurization & air conditioning system, ventilation system, material handling system (lifting tackles, hoist, monorail etc.), signaling & alarm system, control & monitoring system, plc, earthing & lightning protection system etc. 4. the 10mty input coal feeding circuit from trh to th-2 of bhubaneswari chp should be operated along with security arrangement. the 10mty input coal feeding plant consisting of belt conveyor, truck receiving hoppers, drive house, pump house, substation with other accessories along with associated electrical systems to handle and transportation of coal upto th-2. the system also covers all the associated sub- systems like power supply, internal and external illumination, control communication, dust suppression, firefighting and plant cleaning systems etc. further, all the incidental services required for successful operation and security of the 10mty input coal feeding plant is in the scope of the contractor.

Angul, Orissa, India

8 |

Bid Value:
₹ 3.42 Cr. |

EMD:
₹ 5.80 Lakh |

09-06-2025 9 Days Left
|

T247 ID- 88524321 |

operation and maintenance of other machines and plants -amc for mechanical maintenance work at reep

Ganjam, Orissa, India

10 |

Bid Value:
₹ 2.91 Cr. |

EMD:
₹ 2.95 Lakh |

20-06-2025 20 Days Left
|

T247 ID- 88874710 |

overhauling of tamping unit of t-exp/dte machine working in wcr. (quantity 03 sets i.e. 12 units, 06rhs & 06 lhs)

New Delhi, Delhi, India

11 |

Bid Value:
₹ 2.90 Cr. |

EMD:
₹ 8.70 Lakh |

05-06-2025 5 Days Left
|

T247 ID- 88432470 |

repair rate contract for repairs defect rectification of hydraulic equipment of ms enerpac make of various work centers at naval dockyard visakhapatnam

Visakhapatnam, Andhra Pradesh, India

Access BOQ leads for “machinery repair”

Connect with more than 10K verified Buyers for “machinery repair”

Explore Buyers

12 |

Bid Value:
₹ 2.69 Cr. |

EMD:
₹ 5.38 Lakh |

25-06-2025 25 Days Left
|

T247 ID- 88826721 |

design, build, construct, install, commissioning of compost plant of 25 tpd for wet waste along with operation and maintenance of plant for 5 years including the upping fee.

Khagaria, Bihar, India

14 |

Bid Value:
₹ 2.42 Cr. |

EMD:
₹ 4.84 Lakh |

09-06-2025 9 Days Left
|

T247 ID- 88891096 |

operation and maintenance of other machines and plants - providing necessary assistance, operation in pilgering and drawing of incoloy-800 and d9 tubes at nfc, hyderabad-i. assistance in pilgering of alloy-800 tubes for pass size 33.4 x 2.3 to 19.6 x 1.1mm:, a. work requires assistance in pilgering for above mentioned pass size, b. assistance in loading of tubes in pilger mill, c. proper id lubrication of loading tubes for pilgering, d. id pumping and cleaning of pilgered tubes by solvent and felt plug, e. bundling of pilgered tubes in respective batches as per route card quantity, f. polishing of dies and mandrel, g. assistance in tooling of pilger mill, ii. pilgering of d9 tubes for pass size 16.2 x 1.1 to 10 x 0.6mm:, a. operation of pilger mill for d9 fuel tube production including tubes loading, unloading, and manual id lubrication., b. cutting and deburring of as pilgered tubes, c. monitoring of dimensions and id/od surface of ingoing and outgoing tubes, d. assembling and dissembling of pilger mill dies, mandrels, mandrel bar, bushes, jaws, etc. during tool changing, e. route card entry and logging in daily production records., f. checking of pilger mill tools, bars, and equipment condition during operation., iii. assistance in pilgering of alloy-800 tubes for pass sizes (i) 63 x 9 to 48.26 x 4.5mm (ii), 48.26 x 4.5 to 33.4 x 2.3mm, a. work requires assistance in pilgering for above mentioned pass size, b. assistance in loading of tubes in pilger mill, c. bundling of pilgered tubes in respective batches as per route card quantity, d. proper id lubrication of loading tubes for pilgering, e. polishing of dies and mandrel, f. assistance in tooling of pilger mill, iv. assistance in drawing of alloy -800 tubes from 19.6 x 1.1mm to 19 x 1.1mm, a. work requires assistance in drawing, b. end pointing of each alloy-800 tubes in swage pointing machine before drawing, c. cleaning of pipes before drawing, d. unloading of long length drawn tubes from draw bench to loading table, e. pointing end cutting of drawn pipes, f. bundling of drawn tubes in respective batches as per route card quantity, v. assistance in tube preparation for drawing and pilgering, a. operation and up keeping of grit blasting unit for id surface grit blasting of incoloy800 tubes of size 33.4 x 2.3mm, b. cleaning of cartridge filters of grit blasting unit, c. housekeeping of grit blasting area and collecting used grits in sealed containers, d. work requires visual inspection of incoloy-800 tubes of size 33.4 x 2.3mm, d9 tubes, of size 10 x 0.6mm and 7.9 x 0.45mm before taking up tubes for pilgering and drawing, e. visual inspection is carried out to mark unacceptable defects which may lead to poor, recovery of tubes, vi. local rework of intermediate stage tubes for pilgering and drawing, a. work requires local rework of incoloy-800 tubes of size 33.4 x 2.3mm, d9 tubes of size, 10 x 0.6mm and 7.9 x 0.45mm before taking up tubes for pilgering and drawing, b. visual defects marked shall be removed by air belt sander tool, c. replacing worn out belt with fresh belt in air belt sander tool, d. monitoring of dimension before and after rework and recording in log book, e. route card entry and logging in daily production records., f. bundling of tubes as per route card quantity, vii. preparation of daily production report of inc-800 and d9, a. daily entry of work in progress in each work center of sstp and preparing ms-excel, sheet for the production activities of inc-800 and d9, b. data entry of batch wise report of inc-800 and d9, c. data entry of tube-wise testing report of inc-800, d. preparation of monthly recovery reports and bar graphs., viii. fabrication and welding of mandrel bar for pilger mills, a. work involves fabrication of mandrel bar for four pilger mills of sstp, b. ss pipes shall be cut to required length as per drawing, c. edge preparation for welding of bars, d. welding of pipes with bar holding jaws and fabricating mandrel bar as per drawing, e. mandrel welding to mandrel bar, ix. the equipment shall be handed over in clean and healthy condition after completion of, the work every shift., x. care shall be taken to ensure no damage / scratches are inflicted on the tube, during pilgering and drawing operations, xi. all safety precautions as prescribed have to be followed while carrying out the job. shoes, and uniform distinct from nfc to be provided by contractor., xii. contractor must go through all the terms in nit and strictly adhere to it..

Hyderabad, Telangana, India

16 |

Bid Value:
₹ 2.28 Cr. |

EMD:
₹ 2.28 Lakh |

17-06-2025 17 Days Left
|

T247 ID- 88559404 |

annual rate contract (for 02 years) for operation and maintenance of esp plants for unit 1 to 6 (4x210 mw 2x 250 mw) of mtps, dvc mejia

Bankura, West Bengal, India

18 |

Bid Value:
₹ 2.00 Cr. |

EMD:
₹ 1.00 Lakh |

18-06-2025 18 Days Left
|

T247 ID- 88803680 |

empanelment of ship repair workshops and fixation of repair tariff for general machinery overhauling repair jobs at kochi

Kochi, Kerala, India

19 |

Bid Value:
₹ 1.84 Cr. |

EMD:
₹ 2.42 Lakh |

27-06-2025 27 Days Left
|

T247 ID- 88910016 |

periodic overhauling of diesel engine and associated equipment of 8 wheeler detc tower wagon no. 18009 make-icf chennai 2018 (engine cummins: nta 855r) at diesel loco shed jhansi.

Jhansi, Uttar Pradesh, India

20 |

Bid Value:
₹ 1.84 Cr. |

EMD:
₹ 2.42 Lakh |

03-06-2025 3 Days Left
|

T247 ID- 87984495 |

gkps-development of infrastructure facility for repair and maintenance of equipment's of memu coaches and other facilities.

Gorakhpur, Uttar Pradesh, India

Tender247

A unit of I-sourcing Technologies Pvt. Ltd.

Tender247.com is India's #1 Tender Portal which provides Tenders, Tender Results Information, Competitor Analytic Reports, Bid Management services. The portal provides a platform for finding Joint Venture or Consortium Partner and also provides bid consultancy and other relevant services to help contractors in winning tenders.

LinkedinFacebookInstagram
Browsers supported: IE9 & Above, Chrome 44 +, Firefox 44 +
Copyright © 2017 tender247.com. All rights reserved. Terms & Conditions | Privacy Policy
whatsapp