SALES :+91 9512 247 247|SUPPORT :+91 8000 263 450|BIDDING SOLUTION :+91 9811 400 654

Logo

  • BOQ Based Supply Leads
  • Competitors Analytics
  • GeM/Bidding
  • Bid Management System
  • Favourite Tenders
  • SALES :+91 9512 247 247
  • SUPPORT :+91 8000 263 450
  • BIDDING SOLUTION :+91 9811 400 654
AI Search
Advance Search
HomeTendersIndian Tenders

Drills Tenders

Previous Searches :- drills,columns,...

FILTERS

Category: Drillsclose

Latest drills Tenders
155 Live Tenders

Looking for drills tenders? Explore a wide range of government tenders for drills projects. Check local e-tenders and e-procurement platforms for the most promising opportunities. Find detailed bid information and updates on Tender247 today.

Get GIZ Tenders
Request for Bidding Expert

1 |

Bid Value:
₹ 160.50 Cr. |

EMD:
₹ 1.60 Cr. |

16-06-2025 15 Days Left
|

T247 ID- 86025344 |

corrigendum : selection of service provider(s)for biomedical equipment management and maintenance program (bemmp) for east cluster of the state of uttar pradesh for directorate general of medical health, government of uttar pradesh and national health mission digital multimeter- bench-top, dc power supply, variac oscilloscope, scope meter (optional), electrical safety analyzer (optonal, multipara patient simulator (optional), ecg simulators, bp simulator, tachometer, humidity and temperature meter, lux meter & irradiance meter, precision weight set, multipurpose tool kit with drill machine with 10 piece hex wrench set, electro mechanical tool kit, table lathe machine, grinder / sharpener, power drill, extension boards | msme exemption - no | startup exemption - no

Lucknow, Uttar Pradesh, India

BID NOW
Export

INSIGHTS : BY COUNT

Please wait. AI is bringing Insights Matrix.

2 |

Bid Value:
₹ 12.14 Cr. |

EMD:
₹ 36.42 Lakh |

06-06-2025 5 Days Left
|

T247 ID- 88750313 |

supply of goods, tools & equipment for an international standard itot in electrician trade at iti vyara, gujarat, india electrical machine trainer, motor-generator (ac to dc) set, motor generator (dc to ac) set, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems., residential and small business systems, building control systems and automation, industrial control system and automation, solar system lab suitable tables, circuits, power supply, control units, software,, hardware, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analogue), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter,, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester, contactor & auxiliary contacts, load bank 5 kw (lamp / heater type), brake test arrangement c, dc power supply 0-440v, 15a, inverter- input- 12 volt dc, output- 220 volt ac, voltage stabilizer input: ac output:, rheostat, flux meter digital, laboratory type induction coil, used dc generators-series, shunt and compound type for overhauling practice, d.c. shunt generator with control panel, d.c. compound generator with control panel including fitted rheostat, voltmeter,, dc series motor coupled with mechanical load, dc shunt motor, dc compound motor with starter and switch, thyristor /igbt controlled d.c. motor drive with tacho generator feedback, arrangement, thyristor /igbt controlled a.c. motor drive with vvvf control, diesel generator set with changeover switch,, ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse., ac phase-wound slip ring motor with starter and switch., a.c. series type motor with mechanical load., single phase capacitor motor with starter switch., universal motor with starter/switch, stepper motor with digital controller, shaded pole motor, servo motor with control, cut model, cut model of watermill and hydro power, oscilloscope dual trace,, function generator, discrete component trainer, 3- point d.c. starter, 4- point d.c. starter, single phase transformer, core type, air cooled, three phase transformer, shell type oil cooled, variable auto transformer, bath impregnating, oven stove, oil testing kit, battery, battery charger, solar panel with battery, hygrometer, relays-, starters for -, synchronous scope meter, phase sequence meter, electrical worktable to mount electrical machines, electrical worktable to mount electrical machines, electrical worktable to mount electrical machines, work benches with bench vices and storage draws to demonstrate electrical machines, dg set, engineering drawing trainees tool kit, electric hot plate, electric kettle,, electric iron, immersion heater, a.c. fan, geyser (storage type), mixture &grinder., microwave oven, washing machine, hair drier, induction heater, cutout, reverse current, over current, under voltage, resistance type starter, direct online starter, star delta starter-manual, semi-automatic and automatic, auto transformer starter, air conditioner for classroom, air conditioner, air conditioner, steel tape, plier insulated, plier side cutting, screwdriver, screwdriver, electrician connector, screwdriver insulated handle thin stem, heavy duty screwdriver, electrician screwdriver thin stem insulated handle, punch centre, knife double bladed electrician, neon tester, steel rule, hammer, cross peen with handle, hammer, ball peen with handle, gimlet, bradawl, scriber, pincer, wire stripper, tennon saw, firmer chisel wood, c- clamp, spanner adjustable, blow lamp, melting pot, ladle, chisel cold firmer, chisel, hand drill machine, allen key set, oil can, grease gun, pulley puller, bearing puller, scissors blade, crimping tool, crimping tools heavy duty, chisel cold flat, mallet hard wood, hammer exeter type, hacksaw frame, try square, outside & inside divider caliper, pliers flat nose, pliers round nose, plier long nose, tweezers, snip straight & bent, spanner d.e. metric standard set, drill hand brace, drill s.s. twist block, plane, smoothing cutters, gauge, wire imperial(swg), file flat, file half round, file round, file flat, file flat, file flat, file rasp, half round, hand vice, pipe cutter to cut pipes, pipe cutter to cut pipes, stock and die set for, smart interactive touch screen tv / monitor, surround speakers, all in one copier, computer, desktop computer, cad/cam software, laser jet printer, ups, lcd projector, multimedia computer system with all accessories, digital video camera with tripod, white board, pin board, white board, wall charts, transparencies and dvds, first aid box, consumables (set)

Vyara, Gujarat, India

BID NOW
Export

3 |

Bid Value:
₹ 1.80 Cr. |

EMD:
₹ 1.95 Lakh |

11-06-2025 10 Days Left
|

T247 ID- 87168823 |

corrigendum : supply of power bone drill /2025-26

Mumbai, Maharashtra, India

BID NOW
Export

4 |

Bid Value:
₹ 38.75 Lakh |

EMD:
₹ 18.72 K |

18-06-2025 17 Days Left
|

T247 ID- 88866545 |

supply of fire rescue equipment - rope launcher , scba set , gas tight suit , drill machine , gas cutter , safety helmet , fire ball , chemical suit , fireproof hand gloves , smoke mask , fire suit rope launcher, scba set, gas tight suit, drill machine, gas | quantity - 122

Hanumangarh, Rajasthan, India

BID NOW
Export

5 |

Bid Value:
₹ 5.14 Lakh |

EMD:
₹ 10.29 K |

04-06-2025 3 Days Left
|

T247 ID- 88432122 |

corrigendum : call base repair of ems at telephone bhavan ri fda system , replace ri of sounder fda system , refillfire extgshr 4.5kgs , pvdg hosepipe for fire extgshr 4.5kgs ,sf 12v 26ah battery fda system , rpair card of fda panel ,repair hooter of fda system , repair mcp of fda system ,repair ri of fda system , repair pa amplifier of fda system, repair mike of pa fda system , conduct fire drill for bldg ,serice 11kv 400a id substation , filteration mineral oil ,servicing mv and lt panels incl all , calibartion relays by injmethod , replacement 2a hrc fuselink , replacement 63ahrc fuselink , replacement 125a hrc fuselink ,replacement 200a hrc fuselink , service of dg set 250kva , service radiator for ea set 250 kva , supply smpsbattery charger 10a , sf 12v 130ah battery for ea set ,supply brass battery terminals , sf led indi lamps 220 v ac, sfixing bradided fuel pipe for ea , replace blower motorfor sac unit , replace blower drum for sac unit , replacecondenser motor for sac unit , replace condenser blade forsac unit , replace pcb for ac indoor unit , replace pcb forac outdoor unit , replace rotary compressor for sac unit ,replace 25to35 5 mdf capacitor for ac , replace 25a 2pcontactor for ac , replace term box for ac , water servicefor ac unit , blower service for ac unit , leak test and r22 r410 gas charge for ac unit , replace 50mm thick filter , sfmicro controller for ac unit , replace 25a spn mcb , sitevisit for ac repair | quantity - 1896 1

Ahmedabad, Gujarat, India

BID NOW
Export

Explore BOQ Based Supply Opportunities for “drills”

Reach 10K+ Government Contractors Searching for “drills” Supplier

Discover Opportunities

6 |

Bid Value:
₹ 3.80 Lakh |

EMD:
₹ Refer Docs |

02-06-2025 1 Day Left
|

T247 ID- 88025947 |

corrigendum : supply of insert - r390 17 04 08m pm s30t , insert screw 5513020 37 ,soex090408 01 u drill insert , soex07t308 01 u drillinsert , soex060306 01 u drill insert , soex050204 01 u drill insert , asmt11t308pdpr mj ah130 , asgt 11 t304 pdfr aj ks05f , avgt060308 mj ah130 , insert screwfor asmt , insert screw for avgt | quantity - 380

Balasore, Orissa, India

BID NOW
Export

7 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

06-06-2025 5 Days Left
|

T247 ID- 87314994 |

corrigendum : supply of - electric drill | quantity - 2

Shimoga, Karnataka, India

BID NOW
Export

8 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

04-06-2025 3 Days Left
|

T247 ID- 87692767 |

corrigendum : supply of - electric drill | quantity - 4

Kanchrapara, West Bengal, India

BID NOW
Export

9 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

Refer Docs
|

T247 ID- 87723112 |

outline trade proc plan (otpp) for the fy 2025-26 (cod delhi)-- blower portable elect 240v ac 60, "grinder electric portable medium duty, 10", "drill electric portable heavy duty 13, to", electric planer machine, "saw raciprocating portable electoric, 230", "wrench impact electric 230vac single, pha", machine drilling h/duty including, puller mechanical hand operated, "drill electrical portable h/duty 14.5, mm", "machine grinding double ended bench, med", "grinding and buffing machine utility, dou", m/c drilling, "drilling electrical portable m/duty, 13mm", "drill electric portable med duty 10 mm, d", "drill electric portable light duty 6, mm", "drill electric portable light duty 06, mm", "screw driver elect portable h/duty, no4 t", "saw band wood working 1219. 2mm, 400/440", "lathe wood working heavy duty 400/440, v", drilling bench modal md 20mm 220vac, "drill electric portable med/duty 10mm, di", "lathe engine gap ss and sc-430mm swing, o", grinding machine utility flexible shaft, "lathe instrument maker screw cutting, 160", saw reciprocating, "drilling machine up right bench med, duty", "grinding machine utility double ended, be", spray gun, "oven thermal drying electric 2kw 240, vac", plant welding & cutting, dynamomter hydraulic 650 bhp dpx5, drill electric portable m/duty 06mm dia, "machine refacing valve wet bench, heavy d", "machine screwing pipe 4-in motor, driven", "blower electric portable 240v single, pha", car washer protable engine driven, "welding oxy acctylene hy pressure, h/weig", "temperature contralled soldering, station", "vacuum cleaner with optional, accessories", "welding machine arc portable, heavy/duty", "welding machine acr heavy duty ac wt-, 30-", "plant washing veh 2 gun 220v single, pha", "comparator for injector 220/415v, single", welding machine ark 35kva lt duty 230, "torch outfit cutting and welding oxy, ace", "washer motor vehicle 2 gun trolley, moun", "grinding machine valve seat electric, wet", tester alternator regulator digital, "machine saw circular 30-in portable, with", "shaper metal cutting vertical general, pu", "cable welding 230 amps copper, conductor", "welding machine arc transportable, light", grinder electric 230 v ac 50hz portable, lift motor veh 3500 kg lifting capacity;, "test stand automotive generator and, star", blower portable elect 240v ac 60, "grinder electric portable medium duty, 10", electric planer machine, "saw raciprocating portable electoric, 230", "drill electrical portable h/duty 14.5, mm", "machine grinding double ended bench, med", "drill electeric portable med duty 10mm, 2", "drill electric portable light duty 6, mm", "drill electric portable light duty 06, mm", "screw driver elect portable h/duty, no4 t", "drill electric portable med duty 10 mm, d", drilling bench modal md 20mm 220vac, cable electric pvc coted flaxible 9 mtr, saw reciprocating, "grinding machine cylindrical plain, hydia", cable welding flexible 400 amps 5m, welding machine arc dc is 2635 200 amp, "blower electric portable 240v single, pha", car washer protable engine driven, lathe ss & sc, "welding oxy acctylene hy pressure, h/weig", "temperature contralled soldering, station", "vacuum cleaner with optional, accessories", "welding machine acr heavy duty ac wt-, 30-", "plant washing veh 2 gun 220v single, pha", welding machine ark 35kva lt duty 230, "welding machine acc portable light, duty", "torch outfit cutting and welding oxy, ace", "washer motor vehicle 2 gun trolley, moun", "machine drilling bench hand operated, 1in", tester alternator regulator digital, "welding machine arc gasoline engine, driv", "welding machine arc transportable, light", grinder electric 230 v ac 50hz portable, lift motor veh 3500 kg lifting capacity;, "test stand automotive generator and, star", "wheel balancer micro processor, based", "indicator wheel alignment 230vac, singlep", "machine sawing. vertical type heavy, duty", machine griding bench 400/440 a/c, cable elece cabe tyre single no 8 black, cable welding / earthing flexible 320 am, "pump rotary hand driven fuel handling, 50", water spray gun assy, benches truck welding 1524mm (60) long, benches truck 21-33.6mm 730.2mm x 650.9m, pumps gasoline engine driven 2 in/100 gp, "bench transer portable welding, electric", bench trailer portable 914 mm (36in) l, cabinet storage lh, torch hand tp ib 2 cell, "stool workshop 279.4mm (11 in) long-, x254", pale screw remove, "floor serubbing machine with wet, vacuum", "vacuum cleaner with optional, accessories", "machine sewing industrial gen sewing, 132", speedosoft tru camera, "wheel balancer micro processor, based", "indicator wheel alignment 230vac, singlep", tester speedometer no1, "machine sawing. vertical type heavy, duty", "machine lapping valve portable, electric", "machine grinding hacksaw blades belt, dri", benches truck welding 1524mm (60) long, bench trailer portable 914 mm (36in) l, "vulcaniser spot press tyre and tube, 240v", "drill electric portabe 23mm dia c/w, stan", pale screw remove, "floor serubbing machine with wet, vacuum", "vacuum cleaner with optional, accessories", "machine sewing industrial gen sewing, 132", washer bearing, strap carrying, stud self locking, glasses celastoid clear 2 in 50-in dia., "tool screw cutting chasers machine, matri", "tools screw cutting chasers machine, metr", "tools screw cutting chasers m/c, metric o", "tools screw cutting chasers m/c, metric-1", "tools screw cutting chasers m/c, metric 1", "tools screw cutting chasers m/c, metric 3", "tools screw cutting chasers m/c, metric 2", "tools screw cutting chasers m/c, metric 2", "tools screw cutting chasers machine, metr", "tools screw cutting chasers m/c, metric 1", "tools screw cutting chasers m/c, metric i", "tools screw cutting chasers m/c, inside b", guns flint, cable electric 3 core length-19 mtr, cable electric pvc coted flaxible 9 mtr, vulcaniser hot patch 12v 140-160.c type, cylinder standard, spgs valve long, pin shoulder headed(iwc-tcr-xi-11), tools screw cutting b.s.w. 8tpi, canopy assy, tappet spanner, valve leakage flow, idenification list, "holders hand knurling tool w/o, knurls", cap housing brg unit, rule steel 1 meter, "cleaner and tester spark plug 220 vac, si", hose rubber black-8-mm-maker no-65021, "screw machine cheese lead m4x15, mmiwc-tcr-xi-20)", tool holder lathe bits hss 90.53mm, thunb screw 20x21, "googles welders protection with, glass cl", lead assy electrical, "cable power electrical 3 core pvc, 5amp 3", cable power electrical, cable power electrical 7mt, "cable power electrical pvc coated, elexible metre long", "glasses clear 51 mm dia for cover, glasse", "cable power electrical 400a 2.3 mm, 0.29in", plain washer 6 x 12 x 1.5 ms, knob knurled (special) (iwc-tcr-xiv-28), knob knurled (special) (iwc-tcr-xiv-28), cable assy power electrical, respirators painters, reversing cum dual speed switch l & t, "dresser griding wheel hunting type no, o", "regulator oxygen 2 stage max, pressure 8.4 k9/", "regulator oxygen 2 stagemax, pressure 2", "regulator oxygen 2 stage max, pressure 2", arm saw blade guard, rule steel 30 cm lh, guard for saw blade, planer blades nss 610x38x3mm, grease gun 200mm, rubber coupling, "cleaner and tester spark plug bench, 240v", blow pipe cutting gutogen 5, "holder electrode welding 300 amp, rating", strip terminal, screen welding head, screens chipping 108mmx83mm, "hose assy rubber red acetylene 8mm id, 10", "hose assy rubber black oxygen 8mmx, 10met", hose non metallic mixing (iwc-met-32), "torch weling c/w tips size 2,3,6,12,20 of, 30 saffire 2hp", tip size no-55, tip size no-55, control valve assy, hammers pneumatic, guard saw blade, switch 3 way, lamp indicator, box wooden, glasses protective filter bs 4 gw 2 f-52, suction hose, glass magnifying, pin retaining (iwc-mkl-m11-h-77), "spanner open jaw fixed double ended, 14-1", hose rubber air 5/8`` for ply, plier 150mm, "roller rocker arm cam foller iwc-14-, 0013", v belt (b-42)(turbo flex), v belt (b-42) (turbo flex), oxygen hose, plug male 15 3 pole 250 volt hubbell twi, prodders, bar handle air regulator, key spindle, "thermometers dial type 160 degree max, 3.", lamp indicating, hammer welder chiping, "belting rubber friction surface 63mm, wid", dip stick aluminum for 200 ltrs barrel(l, wheel hand tail stock, "paste indicating gasoline 100 grams, tube", pumps gasoline engine driven 2 in/100 gp, breathing apparatus, paste ullage 56.70 gms (2 oz) a tube, ring head stock, "socket taper shank tool exxtention, socket", screw 10-32x 17-in rd hd, h.p inlet valve complete no 1-271806, "pumps petrol 40 semi rotary 31.75mm, oper", "chuck drill machne with key type h10, mm", chuck drill machine with key, "chuck drill machine with key type h, 13mm", "chuck drill machne with key type h10, mm", needles centring 95 mm maker no 138., cabinet storage lh, "cutter milling end parallel shank rh cutting rh helical flute 10mm dia x10 mm dia of shank x 22 mm length of, cutting edge", handle st 10 swg-88.2mmx35 mm, knives (b.c.) front, "cuttrt milling parallel shank rh cutting rh helical flutes tool type 'h' 5, mmdia of shank 5 mm", "cutter milling end parallel shank rh cutting rh helical flute type h 8mm dia x 8 mm dia of shank x 38mm length of, cutting edge", "board switch main for, switches/sockes la", drill counter sink 7.94mm body dai x3.17, case wooden accessory with drawers, oxygen hose, steel brush, tube helieum 3/8" id x 1/8" od, shaft ms, "cutter milling angle equal 20 mm dia x 7 mm x bore x 5 mm width 60 angle too, type n", cloth filter, paper filter, mould side walll, flat file 250mm, "chuck drill machine with key type h, 16mm", pin cutter spil steel m5x57 (iwc-0324), pin cutter split steel m5x57, pale screw remove, gasket, assy electronic control, assy engine control function box, assy strap, assy hose hp pump to fip, handle, fuel level sensor assy, rubber bellows, gasket, gasket hp pump, gasket, o ring, pad, pad, pad vibro mounting, pad vibro mounting small, yoke, collar inner, gasket, gasket, assy wiremesh frame, gasket, gasket, gasket, gasket, gasket, gasket, gasket, gasket, cable system fire control, rod pinion, frame observation window, cable system fire control, gasket, optical assembly,mechanical, cell assy optical instrument, spring helical torsion, gasket, plug vent, gasket, screw hex m6x15 p steel 8.8 is 1364, housing bearing unit, cdr day episcope, optical assembly,mechanical, screw hex socket hd cap m4x25 lg p 8.8 i, ball steel dia 6.0mm crome plated, ball steel dia 3.0mm crome plated, commanders sight electronic unit, screw mc c sk hd m4x18 lg brass is 1365, screw mc chhd m6x12 lg steel is 1366, screw hex socket hd cap m4x16 lg p 8.8 i, screw m/c csk hd m6x15 lg steel 5.5 is 1, assy gamma seal, hex head screw m8x30 a10.9 is 1364 1992, sleeve, rayon braided hose id 19 od 31.9 350 lo, "flexible wire braided rubber hose, 8mm5/1", hex head screw m12x100 is:1364-1982 b-, dowel pin, gasket, gasket, "hex socket headcap screw m10x18 is, 2269", hex screw m6x18 is:1364-2002 b-8.8-p, assy hose, assy hose ix1, assy hose iix1, assy hose ix1/iix2, "hex socket head cap screw m8x16, is:2269", assy accelerator pedal, hose clamp 25 stainless steel is 4762-19, hose clamp pressure line, pipe union bolt 18 is 3174 1974, split pin 4x24 is 549 5310, split pin 4x22 is 549 1974, split pin 2x14 is 549 1994, split pin 3 2x28 is 54 1974, pin, spacer, pin, split pin 4x20 is 549 1974, split pin 3.2x20 is 549 1974, locking wire, hex nut m12 is 1364 2002 b 8.8-p part ii, shut down relay, machine washer 10.5 is 2016 1967, pin rear finder, pin long, pin small, o ring, o ring, spring washer b10 is 3063 1994, spring washer b6 is 3063-2004-p, assy strut first rh, pin, assy turret switch board (hv), hex head bolt m16x1.5x40 gde a10.9 is 13, assy skirt plae 5th lh, assy skirt plate rear rh, hose, assy skirt plate 5th rh, assy instrument panel rh, assy skirt plate 1st rh, assy instrument panel lh, assy pin, hex bolt m20x2 5x50 is:1364 -1992- b 8.8, anti backlash bolt bottom, assy rear fender lh, assy rear fender rh, assy skirt plate 4th rh, assy skirt plate 3rd lh, assy skirt plate 4th lh, bolt hex m10x45n is 1363, boost convertor, op logic board, ac op 400 h2 board, logic card, prism assy,optical instrument, mother board cps, cover gear assy, azimuth position card, elavation stab card, mirror,glass, lens optical instrument, plate metal, gasket, drivers day pariscope (side), switch toggle sp, washer flat, "skirt distinguishing director yellow, and", loader's day sight periscope, gasket, o ring, multiturn variable wire wound 1k+/-5%, resolution test target, parallelism test bracket assy, gridded target, hose clip, armature, solenoid switch, injection pump, fuel feed pump, fuel pipe, oil filter, o ring, strainer, harness ac 34x2 to radio set int/rmt b, harness ac 34x3 to radio set int/rmt a, harness radio set (hf) to antenna couple, harness radio set (hf) to antenna couple, harness ac 34x1 to radio set (hf), harness rf amplifier to antenna, harness radio set b to antenna, harness radio set (vhf) to rf amplifier, harness radio set (vhf) to rf amplifier, harness ac 34x8 to rbj, harness ac 34x7 to ac 35x2, harness ac 34x9 to ac 37x2, harness ac 34x2 to radio set int rmt b, harness radio set a tadiran to antinna, harness tdjb 13 to battery backup 1, harness battery backup 2 filter, harness filter to radio set 50w radio se, harness ac34x9 to ac37x2, harness ac34x6 to ac35x3, harness ac34x7 to ac35x2, harness ac34x8 to rbj, harness rbj stator to pn 1, harneess filter to radio set tadiran and, harness ac34x3 to radio set int rmt a, harness ac 34x1 to radio set int rmt, harness radio set a to antinna, harness radio set b to bulk head bnc, harness bulk head bnc to antinna, harness radio set 50w to antinna, harness tdjb 13 to battery backup i, harness battery backup 2 filter, harness ac34x6 to ac35x3, harness ac 34x1 to radio set int rmta, harness rbj stator to pn 1, harness filter to radio set hf radio set, mh 1 unit with cord 10 mtr length, operator switching unit ac 35, mh 1 unit 1.2 mtr length, main control unit ac 34, matching amplifier unit ac 37, mh 1 unit 2.2 mtr length, antenna lower whip section at 2730, handset h250/u, harness tdjb 13 to battery backup 1, relay card 1, voltage regulator, assy harness tdjb 16 tsb 4, "assy harness sdcb-armd outlet (rh) &, arm", assy breech ring contact, assy harness vr earth, "assy harness fbcb 7 to, roentgenometer", assy harness rmr to gm prob, "assy harness nbc bh to side marker, lamp", "assy harness rbj13 to iprh-7 and ecjb-, 17", "assy harness fbc box 6 to bulk head, (bil", assy printed circuit board, assy harness rbj3-tdjb 8, "assy harness eng hour meter-1 to ecjb-, 18", assy harness rbj2-tdjb7, assy harness armd outlet-sdjb lh, assy emi filter box, assy harness nbc cb-10 to tdjb-17, "assy harness nbc cb9 to emi filter box-, 1", assy harness nbc cb 3 - nbc bh, assy harness nbcbh - 2 to emi filter box, assy harness nbc cb 4 to fcb 6, assy harness nbc cb-6 to tsb 3, assy harness nbc cb 1 to chem sensor, assy harness emi filter box to earth, relay, assy harness rbj1-tdjb 6, "assy harness fuel pump adaptor to, bulk", assy harness ecjb-16-mrb-10, "assy harness emi filter box 3 to, blower", potentiometer, assy harness rbj 13 to apucp, assy printed circuit board timer, assy harness fbc box-1 mrb 12, assy harness ssjb 3 to ecb, assy harness bh to bp-lh, assy harness fcb box 5 to bh (bp-lh), assy harness mlcb 1 to dsb 07, "assy harness bh bulk head plate to, fuel", assy harness bh(fuel pump) to ecjb-4, assy harness engine to ecjb 3, pcb "power supply"-a4-26v400hz, assy harness tsb 8 nbc cb 11, assy cable, assy harness bh-flt, hose(e3-6001741), hose, assy skirt plate 2nd lh, washer, hex head bolt m10x1.5x40 a - 8.8 is:1364, pressure gauge type 213.48/nr, assy hose driving tank to hp pump inlet, assy hose prefilter to driving tank, hex head screw m8x30 is:1364-1982 a 8.8-, hex screw m6x20 is 1364 2002 b8.8p, hex head screw m6x12, is:1364- 2002 b8.8, strap short, clamp stop cock, machined washer 25 is 2016 1967, hose clamp 70 is 4762 1984, sealing ring c26x27 din 7603 cuas, o ring (drg no v54801569027), o ring (drg no v54801609026), o ring (for transmission oil lid), sealing ring c22x30 din 7603 cuas, sealing ring c30x36 din 7603 cuas, spring washer bs-is-3063-1994, spacer, lid, hose short, sealing washer, gasket, "rubber front 340x12x3 bs:2751-2001, grade", strap free end, canvas 1mm thick 85x1420 long is :1424, gasket, hose long, gasket, canvas cotton variety1, o.g (815g/m2), rubber, side 138x12x3 bs:2751-2001,grade, felt, rubber, upper 160x10x3 bs:2751-2001 grad, rubber strip, o ring seal, rubber washer, handle, canvas,cotton variety1, o.g(815 g/m2), canvas,cotton variety1, o.g(815g/m2), rubber, front 777x12x3 bs:2751-1982,, rubber, rear side 33x12x3 bs:2751-2001,, rubber , (front) 572x12x3 bs:2751-2001,, rubber, rear middle105x12x3 bs:2751-2001, rubber, side lh 24x10x3 bs. 2751-2001, rubber, side rh 280x10x3 bs:2751-2001, "canvas cotton variety1,, o.g(815g/m2,size", rubber (side rh) 216x12x3 bs:2751-2001,, gasket, rubber, (rear)100x12x3bs:2751-2001,, rubber (side lh) 243x12x3 bs : 2751-2001, gasket, rubber, front 312x12x3 bs:2751-2001,, felt, rubber, siant 356x10x3 bs. 2751-2001, "hull and turret interface seal-, shamban", o' ring (rothe erde), for rothe erde, o' ring (skf) for skf bearing, assy cable, machined washer 19 is 2016 1987, assy valve modified, lock nut m90x2km 18 skf, assy strap fuel tank guard, pin dowel, assy rubber pad, sprocket drum, collar outer, handle, spring compression, grid, cushion lid drivers hatch, bush, pin, staineless steel wire 04 cr 13 a d1-12 m, bush, sealing pad, rail stop, sealing pad, sealing pad, sealing pad, bulb 24v/21w sbc sc comet 24s 28, assy exhaust tube lh, assy exhaust tube rh, pin, washer, pin, pad, bush, hinge pin, strip, gasket, assy side marker lamp rear, assy blackout lamp, spring washer b 16 din 137, o ring lp pump mounting, assy harness tdjb 19 apucp and apu jb8, assy harness rjb-11apu jb-3, assy harness iprh 2 to ecjb 11, assy harness iprh 1 to ecjb 10, assy harness irpm 6 to iplh 1, assy harness ecjb 9 to mrb 11, assy harness bh to apu jb 7, assy harness apu jb 5 to djb 2, assy harness apu jb4 to tdj b1, assy harness generator to ecjb 1, assembly harness by -ve to by +ve rh, assy harness rbj-10 to apu jb-2, assy harness iprh -10 to ecjb-8, assy harness mrb-8 to rbj-9, assy harness mrb-7 to rbj-10, gasket, gasket, gasket, gasket cable duct, washer din 125 a10.5 200 hv a3p, o ring, gasket, release screw, bellow, elbow tank side, gasket, gasket, sealing pad, sealing pad, hex screw m10x35 is 1364 1992 a 8 8 p, "tube potable water pressure rating, 6kg/c", spring strips, cover rh, cover lh, pin, lock washer, clamp ring, rayon braided hose id 19 od31 9 700 long, bolt, assy hose a1/a2, rayon braided hose id 12.7 od 19.8 60 lo, rayon braided hose id 19 od 31 9 200 lon, cap, hose clip, hex screw m10x30 is:1364-1992- b 8.8-.p, t connector, elbow connetor, steel ball roller bearing 9 is 2898 1965, brake pedal, hex screw m8x18 is:1364-1994 b- 8.8- p, hex screw m6x8 is 1364 1992 p 8.8 zn, assy hose p1/p2, "hex socket head cap screw m12x1.75x20, is", assy clip large, assy clip small, rotatary shaft seal bai, circuit breaker 10a, strap fuel tank lh, strap long fuel tank lh, strap fuel tank rh, "taper roller bearing 170x95x45.5 no, 3221", pin, hose clamp 35 stainless steel is 4762 19, "1/2 brass nickel coated self closing, tap", brazed type pipe union 18 is 3172 1997, spherical roller bearing 100x180x46 no, brazed type pipe union 28 is 3172 1997, tapper roller bearing size 65x140x36 no, assy idler wheel (drg no v54801210014), hose clamp 35 stainless steel is 4762 19, "silicon rubber coated glass fiber, fabric", hex nut m8 is 1364 1992 a 4 p, spring washer b24 is 3063 1994, lock nut m60x2 series km12 skf, spring washer a12 is 3063 1994 p, spring washer b12 is 3063 1994 p, quick disconnect cpl, quick disconnect cpl, split pin 2x20 is 549 1974, split pin 4x20 is 549 2005, split pin 5x32 is 549 1974, hex lock nut m16x2 a8 is 1364 2002, spring washer din 137 b22 fst din 137, hex nut m20x1.5 is 1364 1992 b8 p, skirt plate 4th rh, machined washer 12.5 is 2016 1967, machined washer 21 is 2016 1967, machined washer 31 is 2016 1967, spring washer b4 is 3063-1994, gasket, "nitryile rubber sheet 20x40x2 mm bs, 2752", pin front tender, o ring, spring washer b12 is 3063 1994, o ring, "spring lock washer b 16 phosphate, coated", gasket, spring washer b4 is 3063 1994, compression spring, assy protective panel front rh, pin, hex lock nut m8 1s 1364 2002 b 8.4 part, pin, hose clamp 45 stainless steel is 4762 19, assy strut 2nd rh, wire braided hose id 22 2 od 31 4 long 5, pin, wire braided hose id 22 2 od 31.4 long 7, union, wire braided hose id 46 od 56 4 long 175, filter element small, filter element large, "spring lock washer b20 phosphate, coated", rayon braided hose id 19 ob-31.9 250 lon, gasket, hose clamp 25 stainless steel is 4762 19, turcon stepseal k, assy front fender lh, brake, o ring, special screw, hex head bolt m20x70 a 10 9 is 1364 1992, rubber mount, hex hd bolt m20x50 a 10.9 is 1364 1992, nyloc nut m18x1.5x19.2 ht gde a 10 matl, scraper ring, shut off valve, hex bolt m12x45 is:1364- 1992- b 8 8- p, assy seat, needle bearing, scr hex sst m8x12, hex head screw m10x16 is 1364 1992 a 8 8, hex socket set screw m4x3 is 6094 1971 f, hose, assy harness mrb-6 to rbj-11, assy harness by -ve (top) to earth, assy harness by rh +ve to mrb- 1, assy harness minus cable to earth, assy harness de - ecjb 5, "assy harness starter motor to mrb 4, and", main gyro with bite, 2 axis rate gyro unit, assy printed circuit board (mlcb), fire control box, flexible coupling, lvdt, power assited traverse, slipring, toggle switch, assy harness dsb 1 to pljb 4, "assy harness shut down relay to ecjb, 12", assy harness iprh to dsb-9, assy harness iprh 8 to brp, assy harness roof lamp to earth, assy harness rbj 12 to iplh 2, assy harness bvcb 1 to mrb 13, main relay, pcb "traverse, ac"-a6, pcb "traverse, dc"-a7, pcb "bite"-a9, assy harness dsb 2 to rl, assy harness ela 1 to dsb 8 and fbcb 4, assy harness dsb-6 to volt meter, assy harness ecjb-14 to bh (flt), assy harness dsb-4 to ccf, assy harness dsb 3 to pnvd, "assy harness dd panel2 to central, warnin", assy harness ssjb-2 to rbj-7, assy harness bh to rear lighting, assy harness tsb1-ccf & rl, assy harness rbj8-fcb5-nbc bh, assy harness tsb-2 to fef fev solenoid, limit switch, assy harness by lh +ve to mrb- 2, assy harness by +ve to by- ve-lh, assy harness pljb-5 -10 to fbc box-2, assy harness mrb 3 to ivss, assy rotary base junction( rbj), assy harness nbc cb 12 to earth, assy harness by-ve(bottom)-earth, assy harness iprh 11 to earth, assy harness mrb- 16 to earth, assy harness rbj2 to earth, assy harness rbj1 to earth, assy harness mrb-9 to ecjb-6, assy harness pljb-1 to ecjb-7, assy harness ecjb- 13 to earth, "console interface cable assy (fp-p1 to, c", console unit assy, assy harness rbj3 to earth, assy mounting ct sensor probe, loaders fire safety switch, data cable assy, tag board assy, potmeter, emergency firing mechanis, turret position indicator, breech ring contact, set of 8 cable harnesses, mubus analog i/o pcb assy (pc3), assy harness iprh 12 to mlcb 3 and rbj 8, assy harness armd outlet sdjb rh, console pcb assy, "gun angle and own speed i/f pcb, assy(pc4", mu bus memory pcb assy(pc2), "console interface cable assy fp p1 to, cc", valve block, "power supply cable assy 11 jb p2 to rp, p", rotary switch, cover red colourless, tilt sensor, console internal cable assy, met sensor cable assy fp p7 to met, "ct sensor cable assy (fp-p9 to ct, probe)", push button switch (green), push button switch red, smps assy type 10, pcb logic, flexible pcb - a3, pcb "led"-a2, pcb"power supply"a4+/-15v, pcb "elevation, ac"- a10, cdr handle electronic unit, gyro assembly, navigation(#), push button, "assy smoke distcharger control panel, 902", den relay 61 24 1c 10 amps, emi connector gasket (shellsize 14/15), d/a converter, assy harness mlcb 2 to bulk head, assy harness fbc box to earth, "assy harness bulk head to bilge pump, rh", assy hose lp pump to prefilter, assy filter element, hex screw m8x80 is:1364-1982 b- 8.8- p, hex screw m8x40 is:1364-1982 -a 8.8- p, hex screw m8x20 is:1364 2002 b 8.8 p-par, "cuntersunk screw m6x16 is 1365 1978a 4, 8", cheese head screw m4x10 is 1366 1982 4.8, machined washer 17 is 2016 1967, hex screw m24x3x55 is 1364 1992 a 10 9 p, "countersunk screw m8x10 is 1365 2005 a, 8", toggle switch kt 1021 by kaycee, circlip 165x4 n is:3075 part i 1986, worm drive hose, high silica fabric 150 ril thickness 0 7, o ring (drg no v54801569028), led amber ultra bright one candle, gasket, rubber flap, collar, felt, assy guard rear lh, snap head rivet 3x12grade-2 is:2998-982, rubber, upper 434x10x3 bs:2751-2001,, "flexible cable outer emergency gear, shif", flange complete, flap, gasket, commander's episcope, assy handle (fuel tank), "acrylonitril butadene vulcanised, rubber", assy fuel tank rh front track guard, assy fuel tank lh front track guard, assy lever lh, assy lever rh, adptor1/2"s-td-nitrile-a-f,m22x1.5,rapil, adaptor,barrel, "reticulated polyurathane foam, size10x25", "reticulated polyurathane foam, size42x25", assy lock front fender, assy pin, wire lock, retro reflecting delineator (lh), terminal block 18 way piri 130-18, corrugated hose, assy fresh water tank, fork, central periscope, support, central periscope, shaft, central periscope, latch, central periscope, bush, central periscope, pin, stopper, fork, side periscope, support, side periscope, support, side periscope, shaft, side periscope, latch, side periscope, bush, side periscope, "assy harness drivers switch board 5, to", lcd card, firing solenoid, emi filter card, assy detector probe type gp 102 pla, bottom cutout cover (fuel drain), contactor, gasket, excitor stator, main stator, main rotor assembly, "terminal connector/battery-ve 50 sq, mm", assy tool box, long, assy oil container, oil container, lid, small, inner cap, assy lid, assy chain, shock mount, special screw, oil om-15, split pin 2x16 is:549-1974, assy hose fuel bag to stop cock, hex nut m10 is:1364-2002 b & p, assy fuel tank track guard lh rear, assy fuel tank track guard rh rear, lid, key, washer, plug, sealing pad, ring, o ring lid coolant, sealing pad, lamp filament 28v 40w js 21 js lamp indu, gasket, washer, comer piece rear, comer piece rear, push button, locking ring, assy side marker lamp front, hinge female, o ring level indicator, gun position indicator, roof lamp, cable clamp, assy hand lever, rubber cap, handle, torsion spring, domed nut, spring, sealing pad, assy frame wiremesh air intake, rayon braided hose id 19 od 31.9550 long, rayon braided hose id 19 od 31.9 215lo, hose id 19 od 27 250 long is, wire braided hose id 28.6 od 38.1 75 l, "rayon braided hose id 19 od31 91000, long", stud, hub bolt, plug, o ring, hex screw m10x20 is:1364 1992 b 8 8 p, hex head screw m12x16 is:1364-198. b 8.8, assy locking pin, hsu mounting bolt, bellow, locking plate i, circuit breaker 5a, hinge male, radial oil seal, hex head bolt m10x1x16 a8.8 p, hex nut m12 is:1364 -1992 a- 8-p, valve, copper washer 18x22 is 1375 1994, o ring, hex nut m10 is:1364- 1992- b- 8. p, hex nut m6 is 1364 1992 a4p, split pin 5x22 is 549 1974, split pin 3.2x20 is:549- 1974, pin tapped, sealing washer 8x12 cu (is 3175 1974), spring lock washer a10 is 3063 1994 pho, split pin 8x50 is 549 1974, split pin 4x22 is 549 1974, machined washer 6 4 is 2016 1967, blinker/pulse tranmitter, plate, pin, o ring, o ring, bump pad, o ring, o ring, torsion spring pedal top, v clamp mtu part no 3099970181, control box with lever t vd 735 180 deg, assy protective panel rear, gromet bs 2751 1979, assy protective panel front lh, assy strap, assy protective panel middle, rubber seal, sector small, assy filter small, gasket, assy fbc box, assy speed signal jn box, assy strut 2nd lh, id hose 1/4 inches x 2000 long sae 100 r, assy engine hour meter, hose connector, re-hl-127-head lamp, hose clamp stainless steel 45 is 4762 19, assy volt meter, assy driver switch board, backup ring, assy front fender rh, hex screw m10x35 is:1364 -1992- b- 8. 8-, backup ring, hex screw m10x1 5x30 is:1364-1992- b- 8., hex bolt, assy gamma seal, hex bolt m8x1 25x20 is 1364 1998 b 8 8 p, hex bolt m16x100 is: 1364-1982 a- 8.8 -p, hex head bolt m16x75 gde a10.9 is 1364 2, assy track guide plate, filter pressure line, assy arm, inner cable end connector 180 l, poly bond shock mount, guide ring, foot rest,driver, special washer, strap long, outer cable end connector, cable mount with swivel joint, yoke with locking pin, flexible cable outer parking brake, assy expansion tank, assy fuel tank rear, hex screw m8x16 is:1364-1992 a- 8.8- p, hose clamp breather line, hex bolt m10x1.5x35 is:1364-1992- b- 8.8, counter sunk screw m3x12 is:1365-1978 a-, hex hd bolt m10x1.5x40 a 10.9 phophate, bolt (drg no v54801203004), hex bolt m10x45 is:1364 part ii- 2002 b, resistor 1 kw 0.5 w, helical thread insert sd f22 cnx16 5 to, led module pilot lights lm 13 de 24vcd, gasket, seal, sealing rig c14x20 din 7603 cuas, rubber strip, assy water container, rubber side 243x12x3 bs:2751-2001, grade, sealing ring c22x29 din 7603 c4as, assy latch, tow hook, "2mm acrylonitrilebutadiene vulcanized, r", fuel drain plug, tab washer 13 steel din 93, machined washer 10 5 is 2016 1967, sector gauge lh, o ring, disc spring din 002093 18x6 2x0 5, sealing ring din 007603 a18x24cu, cylindrical roller bearing din 005412 nj, cylindrical roller bearing, hose connector inter connection, seal emergency escape hatch, "slotted countersunk head screw, m6x20 a 8", assy hub idler, locking plate, coolant cooler, extractor, "hex socket hd cap screw m10x1.5x30, gde a", "hex socket head cap secrew m10, x1.5x30", hex hd screw, m16x1.5x35 gde a- 10.9 pho, sealing ring 44.2x2.5 fpm 3, harness external starting engine, sealing ring 18 2x3 fpm 83, assy socket, micro-top element, v-band coupling, cylindrical pin 6m6x1 2 is 2393 1980, relay 67 dp24 2c5 boen, adaptor with parallel screw in ends, screw m22x1.5x70, retainer, harness external starting generator, harness external starting minus cable, "harness external starting starter, motor", assy horn, hex head bolt m12x1.25x25 a 10.9 phospha, hex bolt m10x85 is 1364 part ii 2002 b 8, hex head bolt m8x45 a 10 9 is 1364 1992, spring washer, hex head bolt m10x30 a 8 8 is 1364 1992, shift lever, pump, hex head bolt m10x1 25x95 a 10 9 is 1364, "box mounting receptacle power cge 2e, 28h", "hose 5 meter wire braided with m16x1.5, f", "hose 5 mtrs wire braided with m16x1 5, fe", plug, protective cap, rubber plug, electr gear box contr, hp fuel line, gasket, protecting cap, leather hand gloves 14", "socket for cock nut tightening on, road w", inner cable, parking brake, inner cable, emergency gear shift, stress bolt, plug, protective cap, plug screw, protective cap, rotory shaft seal, piston ring a47, circlip c12 is 3075 2000, circlip 60x3 h is 1375 1986 part i, change over switch nh 45 pricol, toggle switch kt 1021 by kaycee, torsion spring pedal bottom, wrench torque control 14-68 nm, wrench torque control 70-340 nm, wire rope 6x7 gde 1570, id hose 1/4 inches sae 100r1a, rotary shaft seal, "hydraulic supply aggrerate mtu part, no 5", assy filter large, shellac, fitting tool, screw plug, press fitting disc, impeller wrench, distance gauge, split pin 3.2x28 is 549, gasket, paper insert fine filter, electrial rubber gloves, ear muffler, flexible cable, digital ac/dc clamp meter, lock and key for tool box, anti fatig bolt, extension bar 20 sd x 200 long, pre filter 'o' ring (dia 3x378 long), extension bar 20sd x 400 long, power socket (19mm), track pad lifting tool, "light lamp extension for inspection, use", wrench torque control 475-1015 nm, unity window top mirror, "assy hooks spanner for top roller, mounti", "anabond 666t 100g (automobile rtv, silico", cover, assy holder lamp midget, assy tube bend, assy pin (d shackle), assy handle outside, polyethylene pipe,white colour (5mm id, assy exhaust extension fording, assy axle arm rh, ratchet handle 20, assy rope for pulling track, hose clip a type large size 7 is:4762, assy cover plate fuel cooler fording, washer, inter vehicle starting cable (negative), support plate, gasket, assy axle arm lh, belt for opening fuel and oil filter, assy sproket drum removal fixture, assy cover, ground cable, sealing ring 5x2- fpm 83, sector gauge rh, plug, dust extractor outlet, assy cover plate fording, o ring engine coolant filter neck, o ring oil filter neck, o ring oil filling cap, o ring dipstick, toggle switch kt 1032 by kaycee, gasket, gasket (hydraulic power pack air inlet, transmission control complete, assy bracket, assy emergency switch crew comp, dipstick, release part, lever outside, lubrication line shaft, lever inside, washer a cop, assy dee shackle, lamp filament 40w 28v, inter vehicle starting cable (positive), assy skirt plate kanchan front rh, box, belt deflector, "socket wrench using 20 mm square, drive", assy cover, fire extn 3.5 kg halon 1301 squib, portable fire extn khladon, "extinguisher fire 2kg halon 1211, portable", cylinder, portal khlandon fire extn, nbc special blower, back apparatus, "fume extracting fan vijayanta part no, dm/024/1/a", assy exhaust valve (fe), optical sending unit, cable mcu du, hex nut m10 is 1364 2002 p3 8, nut hex m8p 4 8 is 1364 1992, spring washer m10 is 3063 1994, thermal insulating jacket assy rear, assy dust cover barrel, cap, piston head sleeve (recoil system ass), assy rubberished mantlet cover, gauge for cartridge head clearance, "hex socket set (grub) screw-tp,, m6x1x5l", csk hex soc screw m6x15, is-6761-2013, roller cam (v54801293039), circlip, light a30 is-3075-1986, plunger, adaptor (for brush), screw, m8x1.25x25 long, is-1365, bracket, front piston rod (recoil system assy), ring nut (dash pot) (recoil system assy), control rod (recoil system assy), spanner for control bush, assy rod small, screw m8x22, is-1365-1978, key (barrel assy), tool for buffer outer nut, spanner for fornt cap piston, spanner for nut retainer, "breech clamping device (after, pullback)", assy buffer, nut(thermal insulating jacket assy, "socket hd screw (thermal insuljkt, assy)", "slotted 'c' sk hd screw m5x16 tyre 1 is :, 1365", clamp 14x7, ring lockings, mannual fire ext, shock absorber, sleeve, bolt, pipe union with gasket, pipe, pipeline, pipe, pipe, clamp 12x24, bracket, gasket, pipe rear lh, assy pipe rear, pipe rear rh, assy pipe mid rh, assy pipe front lh, assy pipe front, assy pipe mid lh, assy pipe cyl, assy pipe cyl-4, cylinder simulator, test jig, nut (barrel assy), support plate, ir detector(174000400902), mounting lug (pfe), assy pipe-cylinder-3, clip, angle plate, "fire wire (ntc) 6.1m2 of, tptno400974000163", pressure warning device cd, gasket, clip, packing, assy harnes bulk head to fw rhs, assembely ir detector, rubber hosh, "assy harness power supply (mrb to, mcu)", "assy harness mcu to fea c and bulk, head c", assy harness mcu to bulk head, assy harness mcu to sensor hull, assy harness rbj to sensor turret, pipe union bolt 15 brass is 3174 1974, assy fire ext 2kg bcf halon 1211, assy alarm cum, clip to cvre drg no v54801272007, "connector to cvrde drg no, v54801273010", "3 way connector rear to cvrde drg no, v5480127", pad filter, packing, packing, fume extracting fan vijayanta part, assy exhaust valve (fe), rubber pad, hose, hose, spacer, gasket, hose, gasket, nbc special blower 675 71 cb201, relay, air filter (assy), "single row thrust ball bearing 8100, skf", bush brg drive end starter, bush brg drive end starter, ball stud antifrication 6mm, ball stud antifrication 6mm, "brg ball jnl self aligning double row, 35", terminal lug, terminal lug, "bearing ball journal self aligning, double row 40mmx90mmx23mm", "bearing ball journal self aligning, doubl", ball bearing no.8211, "bearing taper roller, 25mmx62mmx18.35mm", brg tappered roller 60x110x23.750 mm, funnel round 2 quarters, tappered roller bearing (inner), gasket ring, brake drum, lamp roof complete, lamp roof complete, lamp roof complete, brg ball jnl s/r 25x52x15mm, "brg ball journal single row, 15x35x11mm", nipple grease button head 1/4 bsp, nipple grease button head 1/4" bsf, buckle 16mm, buckle 12.7 mm, buckle 12.7mm, "pliers circlips internal straight over, 76 mm", cansoil cap screw, "bearing ball journal single row, 65mmx140", gauge pressure oil, computerised wheel aligner, pole screw remover, pole screw remover, rollers hand rubber sheet 50mmx50mm, gauge cylinder compression, brg ball jnl 40mmx60mmx15mm, "brg tapered roller, 20mmx52mmx22.250mm", seal oil, seal oil pto shaft shaft type ml, 1.1/2", nipple 1/8" solderless, "ball brg 3.1750mm, spcn no 2998 latest, gde-5", "bearing tappered roller, 80mmx140mmx35.25mm", ring sealing, bearing tapered roller with stud pin, brg bal single thrust 150 x190x31mm, "bearing needle roller journal, 32x52x36mm", "brg ball single thrust flat sealing, 70x95x8mm", ball brg dia 3 mm, bearing needle 17x37x20mm, body double ende3/8"gas thread, washer, washer, "gasket rubber 0.5x103x112.5 mm for fog, l", "brg ball jnl sgle row, 45mmx100mmx25mm", bearing tapered roller 45.242x77.778x19., fitting, lubrication, "appratus rec shackle plate fabricated, 12", "appratus rec shackle plate fabricated, 7", lens tail light glass, blackout stop light lh and rh, solution rubber upholsters, bearing radial, lens tailstoplight mfrno lucas 576204, smt for removal of tyre size 14..00r20, "chain assy tyre parsons single type, for", harness gps receiver to tdjb, assy harness bnc to mcx adaptor, return line hose and fitting, bottom cu out cover 1 foam, connector, fuel pump pin, lens optical instrument, day wiper harness, harness+connectors, w6 cable, eeprom memory pcb, wiper pcb assembly, night wiper harness, itf tsg 100r pcb, electronic module and looming, spc pcb, mount sub assy, "day and night window protective, cover", screw, harness to intermediate sight assy, harness to dgps jii, pcb harness, "screw cap socket sd hex m6x12 is 2269, st", "screw metric slotted gsk hd coarse, pitch", circlip light 3.2 is 3075 bronze, "screw metric slotted ch hd coarse, pitch", spray nozzle, wiper blade, day fov changer opto mechanism, day channel relay optics, day channel relay prism, cooling fan, fuse, switch set, eye cap, key for lrf switch, washer, "screw cap socket hd hex m3x6 is 2269, ste", earth braid, head rest, "screw metric slotted csk hd coarse, pitch", "screw grub slotted conical end m2x3, is 2", "screw grub slotted control end m2x5, is 2", "screw cap socket hd hex m4x6 is 2269, ste", screw metric slotted csk hd corse, washer flat 4.3mm is 2016 steel, washer flate 3.0 mm is 2216 steel, fov changer, oc4 barrel, eye guard, relay tube, day objective, "screw cap socket hd hex m6x8 is 2269, ste", potentioneter pcb, time base pcb, video pcb, "micromonitor equipped upper casing, crt", dsra protective cover, spindle actuating shutter 36mm long, plate metal, plate metal, gunners control and display gcd, gunners sight electronic unit gseu, glass plate, gasket, gasket, nut plain, ird diaphragm optical instrument, driver transformer assy, hydro pulse spray assy, washer, "micro channel invertor image, intensifier", screw grub slotted steel m2x5.5mm, pin straight head brass length 11.0mm, gasket rubber nitnil od 40.5 mm 18.5 mm, cap seal non metallic, gasket, gasket, eye piece assy optical instrument, adapter housing, bushing sleve pve length 5mm, gasket, gasket, gasket, harness connectors j14 to p15, back up battery assy 24v,23/25ah, carbon brush, fuse glass cartridge, contractor with double 36v, light switch, key switch, compressor, valve spring, puller, oil seal removing, holder, push rod tube spring, pipe-spanner, holding crank pulley, ring piston inserting, lapping tools, valve seat insert (in pos, "punch, removing nozzle washer in, cylinde", safety filter cartridge, main filter cartridge, fuel pre -filter element, fuel filter (assy), oil filter element, air filter element, fuel filter element, oil filter element, kit for electrical wind shield washer, kit for electrical wind shield washer, adopter, adopter, switch key, switch key, dust cap, low pressure switch, blinker transmitter, air pressure gauge, air pressure guage, "fuel injection pump with rqv governor, an", fuel flexible pipe (from fuel filler to, "fuel flexible pipe (from fuel filler, tofip", valve washer, leaf 10th, leaf 8th, gasket, gasket, insul bush, joint bushing(top), insul bush, capacitor assy, joint rubber upper, joint rubber upper, butting ring 3.15mm thk, battery cable (negative), exhaust pipe front part, nozzle injection, nozzle injection, tapper roller ( 90x40x25.25 ), low oil pressure switch, low oil pressure switch, drift for removal of liners, sealing washer, bracket (shovel end), bracket (shovel end), clip valve end, assy pick head bkt, assy clip locking (shovel), "handle(door inner without electro, platin", screw brush carrier, oil catcher (rear brk drum hub), oil catcher (rer brk drum hub), flange gasket, assy boot rear, spacer ring (swivel head), water temperature gauge, roller chain 10b-2, assy shift cylinder, gasket, gasket, "puller for removal of drive shaft/main, s", taper roller bearing 92.075x50 8x24.6 (2, support ring, "puller for inner races of drive shaft, an", closing plug, repair kit for slave cylinder, cross assy, "set of brake lining w/o rivets (wheel, set) front sto", grand seal, grand seal, gasket (hub), vane pump new (steering), vane pump new (steering), exhaust flap, valve, 'o' ring, assy air cylinder, exhaust pipe rear, assy helical gear ( 5th speed), "cylindrical roller thrust bearing, 100x75", oil seal (c r seals), slinger oil, slinger oil, diaphragm, filler profile ( wild shield glass ), rearaxle shaft, rear axle shaft, gasket (front cover upper), brake shoe with lining std, "assy propeller shaft (gear box to aux, ge", pto pump assy, manual vale rotary, shim 0.88 mm thk, gasket rh, gasket rh, assy rubber support rear, return line filter assy, brass pad (2per fork), brass pad(2per fork), gaskt (between upper & lower half), assy clutch master cylinder, adapter ( for oil pr. transducer ), sealing ring, shim 1.04 mm thk, rubber hose, front engine mounting arm rh, bearing pin, friction washer, sealing bush, bearing bush, delivery valve holder, reducing nipple, reducing nipple, spring washer, leaf 7th, diaphragm, governor plunger, governor plunger, "multi purpose plate locking to, threaded", "multi purpose palte locking to, threaded rings", taper roller bearing, leaf 9th, leaf 9th, "cylindrical roller bearing(drive, pinion)", front brake overhaul kit minor, wood ruff key, slack adjuster, u clamp, u clamp, brg cylinderical roller (60x33.5x15), brg cylinderical roller (60x33.5x15), security ring, assy air cylinder, oil seal (to hubs inner, sealing ring), bush for protecting sealing ring, drift for installing cran shaft gear, drift for installing cra-shaft gear, oil seal, shifter fork (2nd/3rd), reducing nipple, drift for valve guides removal(inlet), gasket (cover), r kit feed pump, r kit feed pump, hose clip, worm drive hose clip 90a 154762, hose clip 17.ts 17669, hose clamp tb 126, hose clamp tb 54, hose clamp tb 54, gasket (coveer gear box hsg rear), oil seal, oil seal, stop sigment, "oil gauge line from oilcooler to oil, pressure gauge", oil gauge line from oil cooler to oil pr, centre bolt m12x246x11 is 9484, screw m8x28 is 1364, spring valve, spring valve, valve exhaust, needle cage double row, timing device piston, terminal positive, brake chamber front, assy gear speedo meter drive, assy gear speedo meter drive, shaft sealing ring, shaft sealing ring, set of gasket kit, set of gasket kit, gasket set, oil pressure gauge, roller cage (double row), four point ball bearing (100x45x25), stator assy, lead assy negative, valve, fixing bracket assy, oil seal, wiring harness main, wiring haeness tail, wiring haeness tail, assy coupling flange, wiring harness main, wiring harness main, assy clutch pressure plate, "assy housing ( engine mounting pad, front", assy main line switch, sealing ring assy, leaf 11th, joint bushing, joint bushing, spacer 4.1mm thick, "drift installation of taper roller, bearing of main shaft (inner race)", "drift installation of taper roller, beari", bal bearing (85x45x19)(skf), bal bearing (85x45x19)(skf), "assy propeller shaft front (gear box, to", srdg ball bearing 42x20x12 60042 zr, srdg ball bearing 42x20x12-60042 zr, battery cable positive, battery cable positive, torx flat head screw, torx fillister screw, front cover lower, high temp buzzer unit (12v/24v), high temp buzzer unit, clamp, safety cartridge, stud am10x60 is 1862, assy air line ( lda unit fip to air inta, minor repair kit cylinder head, fuel flexible pipe, fuel flexible pipe, oil seal, joint rubber, assy dipstick (oil), bolt m 12x1.5x4510.9 is 1364, gasket head cover, tube dipstick, clutch pressure plate, spring pin ( to fix rear spring shackle, "lamp 12v 2w(black out lamp rear)ts, 29201", cyl pin 6h8x16-is-2393, tapper roller bearing (90x40x35.25), thermostate insert, ball cap upper part(optional), ball cap upper part (optional), "rectangular three chamber light left, han", rubber buffer, bulb f15 wts 29201, parking bulb hl 12v4w din 72601, shaft seal, shaft seal, door lock (rh) w/o locking device, spacer ring swivel head, oil seal ( to pinion), assy sprg brake actuator (t20/24 lh ), fan assy, water pump kit (major), washer a8.4 is 5370, thermostat insert, taper roller bearing rear, tapered roller bearing, ball pivot, ball pivot, steering lever right, pinion with bearing, stud (mico), stud (mico), bushing, bushing, clamping nut, spring washer b14 is 3063, bushing, bushing, hand priming pump steel, rope, oil seal, rotor assy, repair kit for rear brake acuator, main line switch, shim 0.02 mm thick, assy indicator lamp (low air pressure), hazard warm switch, pump fuel injection (125 hp), assy refilling container, "rubber hose (water pump to t, connector)", rubber hose (t connector to radiator), gasket, shim 0.05 mm thick, taper roller brg(80x140x35.25), taper roller brg (80x140x35.25), dust cover, clip, clip, through bolt, thrust collar, jump ring, jump ring, assy suction tube with strainer, commposit insulation engine hood, electronic temperature gauge, speedo cable 3200 mm long, kit brake lining front std (per axle ), hose (102 id x 120l), oil seal, extender timing pin, engine bearing tool, "drift for outer race of tapper roller, be", seal kit (valve sleeve ), puller for reverse idler shaft, connector, connector, dial gauge attachment, assy accl stopper, terminal moulding, rexehe bellow, brake shoe, sealing ring ce, assy gear shift lever knob (6 speed), driver cup plug, puller fuel pump gear, bearing bush inter bkt, bearing bush inter bkt, speedocable 3200 mm long, speedocable 3200 mm long, "assy propeller shaft rear ( aux gear, box to rear axle)", starter push button, assy propeller shaft ft complete, "pressure plate and needle roller, service", "pressure plate and needle roller, service", releasing bearing costing service kit, releasing bearing costing service kit, cover gear, front spring pin, fuse 8din 72581, "temperature transducer (pricol ) ( mfr, p", piston seal, piston seal, pump fuel injection, drain cock, rubber hose ( water fill pipe ), hose (radiator to water pump ), hose flexible, pressure cap, hose aux ta- to water fill pipe, washer sealing 12mm, washer sealing, seal `o`ring, seal o ring, rubber hose (aux.w.tank to fill pipe), gasket cover plate, gasket cover plate, radiator hose oulet, seal o ring (big), screw banjo connector m 10x1 x19, rubber elbow ( 12 id x150x 150 ), ring pin (std), end ring, bush, clamp hose, boot, rubber boot, rubber housing, assy indicator lamp (hand brake), bli-er rh, low air pressure switch, oil pressure gauge, oil pressure gauge, "tapered roller thrust bearing, normal(72.", ball bearing ( fly wheel ), ball bearing (fly wheel), hose flexible, gear fly wheel ring, bearing ball, bearing ball, assy steering column, clamp v band, gasket oil drain, pin timing, pin timing, seal rectangular ring, puller for helical gear of oil pump, puller for helical gear of oil pump, crown wheel and pinion (41/7), hose plain, tapper roller bearing (pinion) (65x145x3, hose flexible, hose elbow, nut hex flange, rep kit minor a/comp, gasket turbo charger, hose hump, cover vlave, cover.valve, repair kit piston ring, pin, king pin std, terminal base assy, sealing ring, tapered roller brg(hyp pinion), element(primary), assy front mounting bkt lh, insert and valve exhaust, seal o ring, link rod (w/o ball joints), tube injector kit, seal,valve stem, retainer valve spring, retainer valve spring, collet valve, assy rubber support front, valve intake, valve intake, insert and valve intake, cover gear, retainer valve spring, seal injector, injector, diaphragm, rubber hose (radiator to engine), rubber hose(radiator to engine), gasket lub. cooler, "universal joint socket wrench for, front engine mounting of bolts", bolt m8x30 is 1364 s 8.8, assy hvac unit (manual control), gasket connection, pulley fan, pressure line 1st cyl, pressure line 1st cyl, assy ac compressor sp17single pulley, spacer ring, locking cap, locking cap, oil catcher, piston cup, piston cup, threaded ring, threaded ring, valve guide inlet std 15 s7d, assy window regulator lh, piston set std, insert and valve exhaust, insert valve exhaust, assy rear view mirror outer (lh), insert and valve intake, insert valve intake, kit engine piston e iii std, filler profile, filler profile, kit engine piston eiii r/s i, kit engine piston e iii r/s i, pressure spring complete, pressure spring complete, thrust washer, shifter finger, shifter fork (1/2, 3/4 speed), front cover (lower), oil seal ( cr seals ), u clamp, bush, bush, spacer washer 0.2mm thick, spacer washer 0.2 mm thick, fixture for differential assembly, fixure for differerntial assembly, "drift for outer race of tapper roller, bearing", "drift for outer race of tapper roller, br", dial gauge holder for wheel bearing, "dial gauge holder for wheel bearing, adju", glass(rear window with hole), galss (rear window with hole), holder for coupling flange, "tool for intalling 7th main bearing oil, seal", "drift for removal of exhaust valve, guide", puller for front wheel hub inner, "puller for front wheel hub inner, bearing", assy support arm, assy wiper blade, "go nogo gauge for exhaust valve, guides", u clamp rh, stop light switch (pec), bearing needle, axual roller brg, bearing taper roller (133.35 x 85.725 x, "shifting rod (for second and third, gear)", "shifting fork(for second and third, gear)", wind shield glass, wind shield glass, counter shaft, bearing housing, bearing housing, sliding sleeve, rubber seal (seal holder to joint, assy cyl head with valves, "rubber grommet (in brackets) (brake, hose)", cylinder head cap screw length gauge, drift for driver shaft, sleeve for drift 3125890739, elbow pipe, hose clip 11 ts 17669, pressure line 4th cyl, grease nipple am8x1din 71412, d e bearing, wrench for front axle castle nut, cylinder rollr brg, cylindrical roller brg, insp lamp with 10m cable comp w/single, turbocharger, seperator fuel water, "cam shaft gear installation/removal, tool", seal grommet, piston ring expander, gasket flange, injector bore brush, worm drive hose clip 80 a is 4762, "socket wrench for tighting cap nuts of high pressure lines on injecton, pump", elbow km 26x1.5 ts 1658, elbow km 26x1.5 ts 1658, socket al is din 3910, socket al is din 3910, "double ended tubular box spanner, 17x19 i", locking plate, lockig plate, trust washer, thrust washer, hose plain, spring washer, washer sealing, "puller for tapper roller bearing, outer r", puller for tail pinion inner bearing inn, assy rubber bellow, assy rubber bellow, socket for hub lock nut, boot plier, "drift for tapper roller bearing inner, ra", drift for tail pinion inner bearing inne, lubrication oil seal installation tool, puller for coupling flange, puller for tail pinion inner bearing out, "puller for tail pinion outer bearing, out", drift for coupling flange, fuel connector remover, valve stem seal installer, valve spring compressor, crankshaft seal replacer front, "puller for hub inner bearing outer, race", electrical contact cleaner, torque wrench injector terminal nuts, injector puller, weather pack terminal removal tool, blow by tool 0.302, hose flexible, tube fuel supply (main), c hook spanner 115mm, pressure gauge, pressure gauge 0.75 inch h g, connector injector fuel supply, assy lock kit lps wo trans rhd, module electronic control, assy hose (elbow-elbow), taper roller bearing (inner and outer), clinch type clip 15mm(0.8 thk w-12mm), o ring, o ring, gasket-oil cooler, gasket, gasket (oil return), gasket, "gasket for intake mainfold upper-, td2200", rubber buffer, gasket (sealiing nozzle td2200), hose (radiator to cond. tank), rubber buffer, hose radiator to condensation tank, tube radiator to condensation tank, o ring (for vaccum pump), hose clip, oil pressure switch, flexible hose, gasket for exhaust manifold, bearing bush, hose oil cooler side, oil seal-crank shaft front, hose for oil separator, chain guide(main chain) td2200, thrust washer, gasket (cylinder head cover) td2200, air cleaner hose, shoe for chain tensioner td2200, gasket (intake manifold lower)-td2200, fuel pipe td2200, hose overflow hp pump to connector, oil separator assembly, chain tensioner assembly td2200, pulley, hose (inter coller to adaptor), engine mounting rubber, poly v belt 2264mm, belt tensioner, gasket for cylinder head, injector, radiator hose, radiator hose bottom, engine mountng rear, hose, concentric slave cylinder, major kit cmc, gear select cable, shifting cable, transfer case mounting rubber, uj kit, uj kit (speicer-5-625x) for prop shaft, diff lock cable front, diff lock cable rear, rubber ring, bush anti roll bar, silent block, rear suspension bush, bimetal bush, wheel joint, brake lining set, brake pad kit, wiper blade, tail lamp lh, sppedometer cable, "suction hos assembly power stg(gama, lsv)", "returnhoseassembly-internalpower, stg rhd", remote control rh, door handle set hallenger, roof lamp, turbocharger assembly, mud flap rh, wind shield glass (lh & rh), spider, steering gear box rane, shaft clutch relesase, air compressor repair kit, assy radiator complete, srring assy leaf, assy sleeve cyl, battery cut off switch, break bleeding tube, assy lock complete rh, assy front axle complete (41:7)

New Delhi, Delhi, India

BID NOW
Export

10 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

05-06-2025 4 Days Left
|

T247 ID- 88068384 |

corrigendum : supply of - pneumatic pistol drill cp 785 with all accessoriescapacity: 3/8 , rpm: 2400 | quantity - 15

Thiruvallur, Tamil Nadu, India

BID NOW
Export

11 |

Bid Value:
₹ Refer Docs |

EMD:
₹ 1.62 Lakh |

02-06-2025 1 Day Left
|

T247 ID- 88142642 |

corrigendum : supply of - tc drill steel 714 - 1600 x 33 mm , tc drill steel 714 - 1200x33mm , tc drill steel 714 - 800 x34mm , tc drillsteel 714 - 1800 x 33 mm | quantity - 3025

Raichur, Karnataka, India

BID NOW
Export

Access BOQ leads for “drills”

Connect with more than 10K verified Buyers for “drills”

Explore Buyers

12 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

02-06-2025 1 Day Left
|

T247 ID- 88217823 |

corrigendum : supply of morse taper reduction sleeve, drill drift, holder for shell reamer and morse taper exten socket

Medak, Telangana, India

BID NOW
Export

13 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

03-06-2025 2 Days Left
|

T247 ID- 88314367 |

supply of - welding holder , welding magnet set 6 pcs , boschjigsaw , stanley drill bit 70 pcs , earth clamp , gco 220 armature , cordless screw driver set bosch ,hand gloves , nose plier combo 3 pcs , file combo 6pcs welding holder, welding magnet set 6 pcs, boschjigsaw, stanley drill bit 70 pcs, earth clamp, gco | quantity - 15

Gurdaspur, Punjab, India

BID NOW
Export

14 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

03-06-2025 2 Days Left
|

T247 ID- 88319342 |

empanelment of contractors/suppliers/vendors/service providers for various trades/procurement/supply, etc. at nabard bihar regional office, 4th floor, b-block, maurya lok complex, dak bungalow chauraha - 1. providing office stationery items viz. papers, pens, folders, etc. and other items such as epabx/pabx, paper shredder machines, clocks, calculators, telephone, weighing machines etc. 2. ups/batteries, air conditioners, televisions, ceiling/ pedestal/ wall mounted fans, geysers, water purifiers, water coolers, refrigerators, washing machines automated tea/ coffee vending machines, dish wash machines, fly killer machines, etc. 3. chairs, tables, workstations (modular), beds, sofa sets, dining sets, etc. 4. access control system, cctv, etc. 5. disposal of all types of scrap. 6. courier service (local as well as other places) etc. 7. to manage events and various meetings/seminar conducted by bank 8. suppliers of plumbing & sanitary fixtures for office/quarters, etc. 9. supply of range of tools and materials, including hand tools like hammers and chisels, power tools such as saws and drills, and various accessories like clamps and measuring tools along with safety equipments. 10. suppliers/servicing of various types of gym related equipment and carrying out maintenance of gym equipment services at regional office and all 05 quarters under work contract basis 11. suppliers for computers, hardware, software's, mfds, scanners, projectors, accessories, cable supply & laying services, conventional desktop pcs, all-in-one pcs, laptops, printers, multifunction printers, 3-in-1 printers, scanners, adf scanners, fax machines, lcd projectors, keyboards, monitors and other it peripheral devices, network switches and associated works, servers, routers, firewall, network integration, data backup services etc. 12. various types of bank advertisements like press release, tenders, notices etc. 13. suppliers of firefighting equipment, etc. 14. to supply gardening equipments/planters/plants etc. at regional office and all 05 quarters. 15. to carry out the maintenance of all ht/lt line & other electrical fittings at regional office and all 05 quarters by providing requested certified electrical staffs on manpower basis 16. to carry out pest control and anti-termite services at regional office and all 05 quarters under work contract basis 17. providing general insurance cover against receipt of premium for bank's various properties such as office and staff quarters, furniture and fixtures, vehicles, etc. also, empanelment of licensed assessors for the general insurance. 18. supply for office and staff quarters - gas stove/burners, grinding machines, utensils, crockery, etc. 19. spiral binding, binding works, laminations, printing etc. 20. printing various publications / booklets. preparation of banners for special occasions. 21. providing and replacing cartridges of required make and model in the printers in office. 22. supply and related services of sports items at office and staff qtrs. 23. providing fast-moving consumable goods, cleaning materials at the office and staff qtrs. 24. providing e-waste services at office 25. audio visual equipment and related services like pa system at office 26. to provide laundry services in office/vof/vef of nabard bihar ro etc. 27. to provide services in nabard staff quarters/office premises. 28. includes emergency lockout assistance, lock installation and repair, key cutting and duplication, re-keying, and security consultations etc. 29. to plan, design and prepare bill of materials and estimates of works costs for civil works including all masonry, plumbing, electrical, carpentry, and renovation works 30. to plan, design and prepare bills of materials and estimates of costs for civil works including all masonry, plumbing, electrical, carpentry and renovation works. 31. to plan, design and prepare bills of materials and estimates of costs for civil works including all masonry, plumbing, electrical, carpentry and renovation works. 32. to plan, design, layouts and prepare architectural drawings in software, prepare bill of materials and estimates of costs for works entrusted to it with due regard to aesthetics, economy etc., and periodic inspection of works. 33. to plan, design and prepare bill of materials & estimates of costs and drawings in software for construction projects. 34. to plan, design and prepare bills of materials & estimates of costs and drawings in software for all electrical, air-conditioning and electromechanical works. 35. to plan, design and prepare bill of materials & estimates of costs and drawings and day-to-day supervision, measurement, testing and quality control, bill certification and project scheduling, monitoring and control of time and cost for structural works, civil and electrical repair works, interior design, assistance in installation of solar power plant and furnishing works, etc. 36. to plan, design and prepare bill of materials & estimates of costs, supervision, monitoring and certification of bills. 37. to conduct fire safety audit, maintenance of firefighting equipments.

Patna, Bihar, India

BID NOW
Export

15 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

03-06-2025 2 Days Left
|

T247 ID- 88319813 |

supply of centre drill - centre drill no one body dia three by sixteen inches plot diaone by six inches length one point seventy five inches ,centre drill no three body dia one by four inches plot diathree by thirty two inches length two inches , centre drill nofive body dia five by sixteen inches plot dia one by eightinches length two point twenty five inches , button die mtwenty x one point five , button die m five x zero point eight , button die m six x one , button die m eight x one point twofive , button die m twelve x one point seven five , button diem sixteen x two , button die m fourteen x two , button die mtwenty two x one point five , button die m ten x thirty twounf , button die m eighteen x one point five mm , button diem sixteen x one point five mm , button die m ten x one pointfive mm centre drill no 1 body dia 3/16" plot dia - 1/6" length 1.75",centre drill no 3 body dia 1/4" plot dia - 3/32" length 2"",centre drill no 5 body dia 5/16" plot dia - 1/8" length 2.25", | quantity - 33

Jabalpur, Madhya Pradesh, India

BID NOW
Export

16 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

03-06-2025 2 Days Left
|

T247 ID- 88352205 |

supply of iron jali - iron jali , borosil glass cup , xoweicap juice glass , sparkbowl glass , mocktail glass , borosil tea cup , plastic net jali , flexible wire 1 mm , male and female plug , drill ironbit 12 inch , balaji tea thermos 20 ltr | quantity - 67

Darrang, Assam, India

BID NOW
Export

17 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

06-06-2025 5 Days Left
|

T247 ID- 88443536 |

supply of - battery operated drill gun kit | quantity - 15

Nashik, Maharashtra, India

BID NOW
Export

18 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

06-06-2025 5 Days Left
|

T247 ID- 88451064 |

supply of sc drills of various sizes - | quantity - 2000

Nashik, Maharashtra, India

BID NOW
Export

19 |

Bid Value:
₹ Refer Docs |

EMD:
₹ Refer Docs |

11-06-2025 10 Days Left
|

T247 ID- 88470117 |

supply of parallel shank drill bit with drill diameter 12 mm and length 300 mm as per is7823. make: totem/indian tool / addision. [ warranty period: 30 months after the date of delivery ] ]

Chennai, Tamil Nadu, India

BID NOW
Export

20 |

Bid Value:
₹ Refer Docs |

EMD:
₹ 1.36 K |

06-06-2025 5 Days Left
|

T247 ID- 88475228 |

supply of - hqwl drill rod 3 mtrs long , bqwl drill rod 3 mtrs long ,hw casing 3 mtrs long , nw casing 3 mtrs long | quantity - 131

Bacheli, Chhattisgarh, India

BID NOW
Export

Tender247

A unit of I-sourcing Technologies Pvt. Ltd.

Tender247.com is India's #1 Tender Portal which provides Tenders, Tender Results Information, Competitor Analytic Reports, Bid Management services. The portal provides a platform for finding Joint Venture or Consortium Partner and also provides bid consultancy and other relevant services to help contractors in winning tenders.

Services

  • Indian Tender
  • Global Tender
  • Tender Result
  • Value Added Service
  • Joint Venture
  • Vendor Empanelment
  • Bid/Tender Consultancy
  • Competitors Analytics
  • Bid Management System
  • Pay Online
  • Subscribe
Connect with Us
  • About Us
  • Contact Us
  • Blog
  • Tender Guide
LinkedinFacebookInstagram
  • Support : +91 8000 263 450
  • Sales : +91 9512 247 247
  • Bidding Solution : +91 9811 400 654
  • Email : sales@tender247.com
Browsers supported: IE9 & Above, Chrome 44 +, Firefox 44 +
Copyright © 2017 tender247.com. All rights reserved. Terms & Conditions | Privacy Policy
whatsapp

Get Free Sample

1457
refresh
By clicking upon "Submit" button, you agree to Terms & Conditions & Privacy Policy of this website.