1 |

Bid Value:
₹ 160.50 Cr. |

EMD:
₹ 1.60 Cr. |

30-05-2025 13 Days Left
|

T247 ID- 86025344 |

corrigendum : selection of service provider(s)for biomedical equipment management and maintenance program (bemmp) for east cluster of the state of uttar pradesh for directorate general of medical health, government of uttar pradesh and national health mission digital multimeter- bench-top, dc power supply, variac oscilloscope, scope meter (optional), electrical safety analyzer (optonal, multipara patient simulator (optional), ecg simulators, bp simulator, tachometer, humidity and temperature meter, lux meter & irradiance meter, precision weight set, multipurpose tool kit with drill machine with 10 piece hex wrench set, electro mechanical tool kit, table lathe machine, grinder / sharpener, power drill, extension boards | msme exemption - no | startup exemption - no

Lucknow, Uttar Pradesh, India

BID NOW

INSIGHTS : BY COUNT

Please wait. AI is bringing Insights Matrix.

2 |

Bid Value:
₹ 43.00 Cr. |

EMD:
₹ Refer Docs |

20-05-2025 3 Days Left
|

T247 ID- 85125767 |

corrigendum : procurement of 280hp (not less than 270hp capacity) motor graders with spare parts and service supervision under cost cap contract for a period of 9 years / 21,000 hours whichever is earlier from the date of commissioning

Kothagudem, Telangana, India

BID NOW

3 |

Bid Value:
₹ 20.81 Cr. |

EMD:
₹ 5.20 Lakh |

31-05-2025 14 Days Left
|

T247 ID- 88282679 |

rpnc254019 annual rate contract for operation and maintenance of dmro cpu plant and supply and installation of uf membrane at panipat naphtha cracker

Panipat, Haryana, India

BID NOW

4 |

Bid Value:
₹ 13.85 Cr. |

EMD:
₹ 9.43 Lakh |

21-05-2025 4 Days Left
|

T247 ID- 87318115 |

corrigendum : cpclv25161 oph hrsg-5 super heater and evaporator module replacement jobs including supply of materials, for reliability improvement at cpcl, manali

Chennai, Tamil Nadu, India

BID NOW

5 |

Bid Value:
₹ 12.76 Cr. |

EMD:
₹ Refer Docs |

17-05-2025 Ending Today
|

T247 ID- 87847479 |

custom bid for services annual rate contract for unplanned/ opportunity/ short shutdown jobs of furnaces, reactors, columns, vessels, heat exchangers and miscellaneous piping jobs at srus and other units of haldia refinery-1. plates, pipes & pipe fittings, all types of valves, metallic & non-metallic gaskets, gasket sheets, fasteners, nuts & bolts/studs, nozzles, structural steels shall be provided as free issue materials. however, contractor has to keep the record of all the materials issued to them for reconciliation purpose. 2. heat exchangers & afc metallic & non-metallic gaskets, gasket sheets, fasteners as per requirement. b. contractor's scope of work: shutdown jobs as mentioned in detailed schedule of rates and elsewhere an integral part of this tender. 1. following activities will be treated as part of the job (as in indicative or in expressive manner): a) blinding-de blinding of various lines, vessels, exchangers, columns, tanks nozzles, pump nozzles etc. b) water flushing / steaming of lines/ de-choking of lines as per instruction of production dept. c) erection & removal of scaffolding is in contractor's scope whenever & wherever required for all jobs mentioned in sor. d) opening, hydro-blast cleaning including pulling out bundles, repair, and hydro-testing of exchangers/cooler/condensers. e) replacement/repair of casing plate of furnace (if any). f) tube replacement/thermocouple as per instruction of eic along with hydro-testing of coils. g) re-visioning of burner block, repair/ replacement of furnace internal parts. h) opening and box up of furnace header, covers etc. scaph revisioning, soot blower re-visioning, water washing and other maintenance jobs i) dismantling of all types of piping by hot cutting /cold cutting. j) replacement of cs, as and ss piping with rectification of supports (if any). k) laying of cs/as/ss piping with fittings, valves and necessary supports as per the drawings related to modification schemes (if any). l) shot blasting of pipes as per requirement. m) installation of stationary equipments. contractor to carry out mockup assembly as per job requirement at no cost to iocl as desired by eic (if any). n) installation and dismantling of all types of valves. o) fabrication of piping specials e.g. miter bends reducers etc. p) pipe dp test, radiography, heat treatment. q) hydro-testing of pipes, pneumatic testing of piping. r) fixing / removal of flanged joints, rtj joints. s) supply, fabrication, erection of structural work related to platforms, piping supports etc. t) opening of columns, cleaning, repair and pneumatic testing of all nozzle pads, box up of all nozzles with proper gaskets and nuts and bolts. u) handling/replacement of packings and tray valves inside the column (if any). v) strip lining of columns, if any w) preparation for inspection activities such as wfmpi/iris etc. x) cleaning and replacement of demister pads y) opening of vessels, cleaning, repair (if any), box up z) hot bolting during start-up of unit. 2. besides the above main activities, the following sub activities shall also be treated as part of the job and included in contractor s scope of work: a) as per requirement and instruction of iocl, contractor shall mobilize sufficient nos. of highlyskilled, skilled, semi-skilled and unskilled labor, tools, tackles. consumables like electrodes, filler wires, heat treatment equipment, radiography equipment, grinding equipment, high pressure hydro-jetting machines, cutting equipment, welding equipment, scaffolding material, truck-trailer, pressure gauges with calibration record, testing pump(s) along with fittings for hydraulic test, duly tested & inspected, etc. along with necessary supervision and planning personnel required for job. b) as per requirement and instruction of iocl, contractor shall arrange all tools and tackles, equipment, lifting & handling equipments such as chain pulley blocks of required capacity, monkey blocks or mono blocks or trolley of required capacity, slings, d-shackles, polyester belts of required capacity, hydro-testing pumps along with pressure hoses & fittings/ accessories, calibrated pressure gauges, hydraulic jacks of required capacity, torque tools, hydraulic nut splitter, hydraulic flange spreader, arrangement for plugging of tubes, foldable aluminum ladders including supply of any other materials required to complete the job as per full satisfaction of iocl without any extra cost. c) contractor to carry out area cleaning, scrap removal from site on daily basis during job execution as well as after job completion as per the direction of iocl. d) contractor to provide assistance in carrying out passivation of furnace coil, certain exchanger elements as per inspection requirement and as directed by iocl. transportation and stacking of rejected furnace tubes/ reformer catalyst tubes and other materials to designated place as per instruction of iocl. e) contractor has to bring sufficient amount of wooden sleepers for keeping tube bundles. also sufficient nos. of wooden wedges to be kept for putting under channel head. f) shifting of bundles, channels to hydro-jetting area and return will be in contractor s scope. structural steel material for certain job requirements as instructed by iocl. 3. contractor shall have to undertake mobilization within 2 days from date of intimation for unplanned shutdown & within 7 days from date of intimation for opportunity/ short shutdown. engineering days shall be as per eic based on site conditions and contractor shall have to adhere to the same. 4. contractor may have to deploy shutdown engineer(s) for making execution plan as per instruction of iocl. shutdown engineer(s) are to be re-deployed again along with the mobilization of the resources for day to day monitoring of jobs as per execution plan. such deployment of shutdown engineers during shutdown execution shall be in 12 hrs shift. daily plan vs progress report is to be generated and submitted as per iocl. 5. safety supervisor shall be responsible for safety surveillance of various maintenance activities such as column/vessel or any confined space entry, height jobs, crane operation, material handling, structural removal & erection, catalyst unloading & loading, inert gas entry & other shutdown jobs. daily reporting of work permit system compliance; checking of ppe, scaffoldings, gas testing for hot jobs, slings & other lifting tools & tackles; on the spot safety training & tool box talk at sites on daily basis. safety supervisor shall carry out job safety analysis (jsa) for the jobs being carried out by the contractor. safety supervisor will take rounds of entire area under his supervision and note and alert workers in case of unsafe acts & unsafe conditions. he will report unsafe conditions/ unsafe acts and near miss incidents and accidents in his area to the respective iocl site engineer. 6. area cleaning group shall be deployed in each shutdown unit. this group will directly report to iocl shutdown engineer. they will not be allowed to carry out any activities other than area cleaning /scrap removal. c. special conditions for equipment hiring (cranes, hydra, forklift, truck-trailer etc.): 1. the equipments on hire must be supplied with load test certificate approved by competent agency / authority. the certificate shall be valid for the period of crane at iocl site. competent agency / authority must have approval of factory inspector. all load testing certificates shall be submitted to eic for review & acceptance before actual deployment of equipments at site. the equipments shall not be allowed to be deployed without the necessary statutory certification. 2. crane/ hydra must have safety latch on hook. crane must have in built safe load indicator with variable load chart. all the cranes, hydra, fork-lifts should have reverse gear alarm. the exhaust of the engine shall be fitted with a permanent flame/spark arrestor for operation inside the refinery premises. 3. resource deployment (planned/actual) by the contractor in each shift shall be reported to the iocl by the contractor in a structured format. crew of the equipment must change after 12hrs. 4. on arrival of any heavy equipment at the refinery gate, pre-entry inspection of the equipment shall be done at the gate prior to entry as per iocl checklist. before the equipment is put to use, pre-deployment inspection is to be carried out by the contractor as per iocl checklist. daily checklist to be filled by operator/ personnel and to be checked by safety supervisor. all heavy equipments are to be checked on daily basis as per the standard equipment check-list. signed equipment check-list of all equipments shall be submitted to iocl. 5. the offered model of equipments shall not be more than 15 years older (year of manufacture) at any point during the contract. contractor has to submit the documentary proof like registration certificate (rc)/ purchase document for calculation of the same. older equipments shall not be allowed to enter against the work order. 6. there may be increase or decrease in the hiring days for resources as per site requirement. the type and number of heavy equipment to be deployed shall be as decided by iocl and the contractor shall mobilize as per direction by iocl. the no. of days shall be counted from the day the equipment reports to the iocl and is ready for use inside the refinery premises and up to the day when intimation for demobilization is given by the iocl. 6. hydra as per specifications / terms & conditions shall be applicable wherever & whenever deployment of hydra/(s) is/are intended &/or envisaged &/or anticipated as per requirement of job/ tender at haldia refinery given in tender shall only be allowed inside refinery. 7. the equipments shall be parked inside the premises of owner (iocl, haldia refinery) and shall be at the disposal of owner (iocl, haldia refinery) for the entire period of the contract. iocl will have total right on all the chargeable resources made available by execution agency for utilizing them in any location inside the refinery depending upon requirement of the job. 8. required way bill / road permit shall be issued by the contractor. 9. all the heavy equipments employed during shut down should be in extremely good condition. equipments shall be provided with suitable support staff including operator, rigger, helper etc. with valid license for smooth operation & maintenance on continuous basis. all the overhead expenses towards the deployment of the personnel are included in the awarded rates. 10. manpower to be deployed by the contractor against each equipment per shift shall be as follows: a) crane: 1 operator, 1 rigger & 2 helpers. b) other heavy equipments like forklift/ boomlift/ scissor lift/ hydra/ truck-trailer etc: 1 operator & 1 helper. 11. all consumables like diesel, fuel, engine oils, battery, acid, distilled water, greases, lube oils, slings, hose, hose couplings, filters, spark arrestors etc shall be arranged by the contractor at their own cost. all special tool/tackles, battery etc. or any specific item not mentioned herein but are required for successfully carrying out the job shall be arranged by contractor at their own cost. contractor shall arrange greasing gun, nipples, jacks, sleepers, funnels, fuel filling pumps, slings, d-shackles and other tools, tackles and equipment required for operation & maintenance. 12. the equipments shall be equipped with all the standard and necessary attachments & accessories, tools & tackles. all normal hand tools like various type of spanners, center punch, hammers, allen keys, wrench sockets with attachments, screw drives, filler gauges, spirit levels, various types of pliers/cutters, pipe wrenches, measuring tools, steel rule, right angles, electrical tester etc. & any other tools and tackles required for safe operation and maintenance of the equipment shall be in the scope by contractor. 13. during contractual period, if any break-down takes place in any of the equipments the same has to be attended by contractor. if new heavy equipments are required for replacement of break down equipments, the same shall be provided at site without any extra cost to iocl. no mobilization/demobilization charges shall be paid by iocl for replacement equipments. all maintenance related work of the equipments, including replacement of spare parts & components, shall be carried out by the contractor's own personnel at the contractor's own cost. the scope of this contract envisages that the equipments shall be always be maintained well and kept in asgood-as-new condition. 14. before lifting/handling heavy erection, contractor shall prepare and submit an erection methodology plan in advance for approval of engineer-in-charge and other authorities. 15. for crane operation, contractor has to develop area for placement of crane which requires plates of sufficient thickness below all out-rigger arms of crane, sand bags, slippers etc. so as to provide strong base and avoid settlement of ground. for this purpose, contractor shall be required to arrange as well as cut the plates as their own cost. this requirement shall be in addition to the wooden slippers that shall be borne by contractor. 16. contractor shall depute qualified operators with valid driving license of the equipment, for heavy equipments deployed at iocl haldia refinery site. the skill of person/operators may be verified by iocl before deployment on the job. in case they are not found suitable, they shall be rejected and in this regard the decision of iocl shall be final and binding on the contractor. all operators must have access control card for better monitoring. 17. after deployment of the equipment, the contractor is to provide necessary manpower for carrying out the mandatory activities like safe parking, safety checks and cleaning etc even if the same goes beyond normal working hours. for this no extra claim shall be entertained. other required machinery like hydra / truck / trailer etc. for shifting / modification of crane loads / booms including manpower shall be under the scope of contractor. all such jobs shall be carried out as per instruction of iocl. 18. a daily log record shall be maintained by the contractor for maintaining the records of running/operation of equipment at site. the log book shall be duly checked and signed by site engineer /e-i-c. the final payment for all the equipment shall be done on the records available as per jointly certified log book by site engineer / e-i-c and the contractor. 19. contractor shall arrange for necessary insurance coverage and medical facilities for the operators for accidents, physical injury, death that may arise out of and during the course of performance of the services by the operators. iocl shall not be responsible for any compensation in this regard. during the entire period of this contract, the ownership, risk of loss or damage of the equipments shall remain with the contractor only. contractor shall be responsible for maintaining the equipments in good working condition throughout the term of this contract. 20. contractor shall be responsible for the safety of the equipments & personnel. all safety precautions must be observed while operating the equipments. if, due to negligence or nonobservance of safety norms, any injury/accident occurs to any person/public, the contractor shall be required to pay the necessary compensation/expenses, as decided by the appropriate authorities. iocl shall not be responsible for any accident/ injury to the contractor's crew while the equipments are in operation. d. special conditions for equipment hiring (hydraulic torque tools): 1. as per requirement and instruction of iocl, contractor shall mobilize hydraulic tools & tackles, hydraulic pump, electrical console, hydraulic hoses & fittings to facilitate torqueing job, skilled operators, supervisor / engineer or any other accessory required to complete the work. 2. all safety gadgets like helmets, safety belts, safety shoes, safety goggles, hand gloves etc., required to be provided to all workmen and site supervisors to carry out the work as per safety norms of the corporation by the contractor at its own cost. 3. engineers / supervisor and operator shall have sufficient proficiency in operation of bolt tensioners. contractor shall have all type of sockets, both inch and mm, available with them. the torque tool shall always be in workable condition else payment will not be certified. contractor shall have sufficient spares to rectify the machine/ spare machines in case of breakdown to avoid any job delay. e. special conditions for equipment hiring (hydro jetting machine) 1. supply of all tools tackles, hydro-jetting machines (minimum capacity-15000psi) along with all accessories, consumables, fuels, lube oils, manpower, high pressure water jet pump, high pressure hose & couplings, flexible lancers, power lancers, foot operated valve, rigid tubes, carrier nozzles, gun with safety brackets, fine quartz sand, protective shields, apron etc. including supply of any other materials required to complete the job as per full satisfaction of iocl. all the wearing parts of power lance/flex lance like nozzles, packings, bushings etc. and all tools/tackles for operation & maintenance of above machines shall be in contractor's scope. 2. inspection shall be carried out by iocl after cleaning of bundle/tubes. the job shall be completed only after satisfactory report by our inspection/production dept. hydro-jetting machines and manpower (manpower includes complete operation crew with supervisor, skilled/ unskilled manpower in sufficient numbers) shall have to be mobilized at site on round the clock basis as per instructions of iocl. 3. attending of all the running maintenance of hydro-jetting machine shall be in the contractor's scope. no payment shall be admissible for the period, when the machine is breakdown. if any machine break-down takes place then same has to be attended by contractor. if new machine is mobilized as replacement of breakdown machine, then same shall be provided at site without any extra cost to iocl i.e. no mobilization/demobilization charges shall be paid by iocl for replacement machine. 4. contractor to ensure proper ppe for the hydro-jetting machine operator & lance operator. protective & water-proof suit (turtle suit), face-shield & hand gloves are to be provided for operator of hydro-jetting machine lance. hard-barricading is to be made between two tube-bundles being cleaned by hydrojetting. contractor to note that for any tube bundle, simultaneous external (od) and internal (tube id) cleaning shall not be permitted. hydro-jetting lance system should be with foot control (dead man valve) near to the operator or hand operated gun with control in operator's hands to ensure additional safety. positive isolation of hydro-jetting water shall be done using either metallic sheets or any other alternate arrangement producing safe work place.

Midnapore, West Bengal, India

BID NOW

Explore BOQ Based Supply Opportunities for “audio and visual equipment”

Reach 10K+ Government Contractors Searching for “audio and visual equipment” Supplier

Discover Opportunities

6 |

Bid Value:
₹ 11.94 Cr. |

EMD:
₹ 35.83 Lakh |

26-05-2025 9 Days Left
|

T247 ID- 88419595 |

supply of goods, tools & equipment for an international standard itot in welder trade at iti rajkot, gujarat, india package 2: welder trade electrode holder, h.p. welding torch with 5 nozzles, welding transformer with all accessories (400a, ocv 60-100 v, 60% duty cycle), welding transformer with all accessories (300a, ocv 60-100 v, 60% duty cycle), inverter based welding power source, d.c arc welding rectifiers set with all accessories, gmaw welding machine, ac/dc gtaw welding machine, spot welding machine to15 kva with all accessories, gas welding table with firebricks, arc welding table with positioner, oven, electrode drying, table for gas cutting, welding simulator for smaw / gtaw / gmaw, seam welding machine(longitudinal) 75 kva with accessories, submerged arc welding machine with accessories (1000amps), friction welding machine, welding motor generator, fume extractor system connecting all the welding booths, mag welding robot with all standard accessories, welding booth with forced fume extractor, for welding machines listed above, carriage welding system, 400 amp with industry 4.0 ready multi process welding set, gas manifold system, magnetic particle testing machine probe type with all standard accessories, oxygen gas pressure regulator double stage, acetylene gas pressure regulator double stage, co2 gas pressure regulator, with flowmeter, argon gas pressure regulator with flowmeter, flash back arrester (torch mounted), flash back arrester (cylinder mounted), air plasma cutting equipment with all accessories, air compressor suitable for air plasma cutting system, portable gas cutting m/c capable of cutting straight & circular with accessories, pedestal grinder fitted with coarse and medium grain size grinding wheels, bench grinder fitted with fine grain size silicon carbide green grinding wheel, ag4 grinder, hand shearing machine capacity to cut 6mm sheets and flats, power saw machine, work bench, oxygen, acetylene cylinders, co2 cylinder, argon gas cylinder, anvil 12 sq. inches working area withstand, swage block, portable abrasive cut-off machine, potable cnc profile cutting system with all standard accessories, ultrasonic flaw detector with accessories, eddy current tester, x-ray film illuminator, electric pipe cutting and bevelling machine, cutting capacity 15 mm, universal testing machine, rockwell hardness testing machine, impact testing machine (charpy & izod combined), air conditioner, air conditioner, diesel generator set, air conditioner, work bench with bench vices and storage drawers, podium, s.s wire brush, spark lighter, welding hand shield fibber, chipping hammer with metal handle, chisel cold flat, centre punch, dividers, stainless steel rule, scriber, flat tongs, hacksaw frame (fixed), file half-round bastard, file flat, hammer ball pane, tip cleaner, try square, spindle key, screwdriver, number punch, letter punch, magnifying glass, universal weld measuring gauge, spanner d.e., c-clamps, sledgehammer (double faced), s.s. tape, trolley for cylinder (h.p. unit), portable drilling machine, leather hand gloves, cotton hand gloves, leather apron, leather hand sleeves, safety boot, leg guard leather, arc welding single-coloured glasses, arc welding plain glass, gas welding goggles with colour glass, safety goggles (plain), welding helmet (fibber), first aid box, auto darkening welding helmet, fire extinguishers (foam type and co2 type), fire buckets with stand, radio graphic reference standard, pressure vessel codes (book or cd) ibr & asme sec ix, structural welding codes d1.1(book or cd), wall charts, transparencies and dvds related to the trade, engineering drawing trainees tool kit, white board, wall clock, pin board, black board and easel with stand, lcd projector, computer system with latest configuration, ups, lcd projector screen, document camera / visualizer, smart board / inter active board, over head projector, video camera with stand, printer cum scanner, laptop with all latest os, surround speakers, all in one copier, computer system with latest configuration, ups, computer system with latest configuration, cad/cam software, laser jet printer, ups, rubber hose clip, rubber hose (for oxygen), rubber hose (for acetylene), arc welding cable (multi coloured) copper, die penetrant testing kit, insulation ring, nozzle stock, spatter guard, gas nozzle, contact tip, contact tip, bare steel inner liner, bare steel inner liner, clamping piece, clamping piece, filler wire mild steel, filler wire mild steel, gas regulator, electrode, electrode, electrode, electrode, electrode, electrode, torch cap long, torch cap medium, torch cap short, clamping sleeve, head shield, clamping sleeve, clamping sleeve, clamping sleeve case, clamping sleeve case, gas nozzle ceramic, gas nozzle ceramic, gas nozzle ceramic, tungsten electrode, tungsten electrode, tungsten electrode, welding cable, steel plates 5mm, steel plates 6mm, steel plates 8mm, steel plates 10mm, welding electrodes, mig welding consumables, tig welding consumables, rubber hose acetylene, ag4 grinding wheels, hacksaw blade, ag4 grinding wheels, earth clamp, oxy acetylene gas cutting blow pipe, semi-automatic gas cutting booth, plasma cutting worktable

Rajkot, Gujarat, India

BID NOW

7 |

Bid Value:
₹ 11.94 Cr. |

EMD:
₹ 35.83 Lakh |

26-05-2025 9 Days Left
|

T247 ID- 88419738 |

supply of goods, tools & equipment for an international standard itot in welder trade at iti bhilad, gujarat, india package 2: welder trade electrode holder, h.p. welding torch with 5 nozzles, welding transformer with all accessories (400a, ocv 60-100 v, 60% duty cycle), welding transformer with all accessories (300a, ocv 60-100 v, 60% duty cycle), inverter based welding power source, d.c arc welding rectifiers set with all accessories, gmaw welding machine, ac/dc gtaw welding machine, spot welding machine to15 kva with all accessories, gas welding table with firebricks, arc welding table with positioner, oven, electrode drying, table for gas cutting, welding simulator for smaw / gtaw / gmaw, seam welding machine(longitudinal) 75 kva with accessories, submerged arc welding machine with accessories (1000amps), friction welding machine, welding motor generator, fume extractor system connecting all the welding booths, mag welding robot with all standard accessories, welding booth with forced fume extractor, for welding machines listed above, carriage welding system, 400 amp with industry 4.0 ready multi process welding set, gas manifold system, magnetic particle testing machine probe type with all standard accessories, oxygen gas pressure regulator double stage, acetylene gas pressure regulator double stage, co2 gas pressure regulator, with flowmeter, argon gas pressure regulator with flowmeter, flash back arrester (torch mounted), flash back arrester (cylinder mounted), air plasma cutting equipment with all accessories, air compressor suitable for air plasma cutting system, portable gas cutting m/c capable of cutting straight & circular with accessories, pedestal grinder fitted with coarse and medium grain size grinding wheels, bench grinder fitted with fine grain size silicon carbide green grinding wheel, ag4 grinder, hand shearing machine capacity to cut 6mm sheets and flats, power saw machine, work bench, oxygen, acetylene cylinders, co2 cylinder, argon gas cylinder, anvil 12 sq. inches working area withstand, swage block, portable abrasive cut-off machine, potable cnc profile cutting system with all standard accessories, ultrasonic flaw detector with accessories, eddy current tester, x-ray film illuminator, electric pipe cutting and bevelling machine, cutting capacity 15 mm, universal testing machine, rockwell hardness testing machine, impact testing machine (charpy & izod combined), air conditioner, air conditioner, diesel generator set, air conditioner, work bench with bench vices and storage drawers, podium, s.s wire brush, spark lighter, welding hand shield fibber, chipping hammer with metal handle, chisel cold flat, centre punch, dividers, stainless steel rule, scriber, flat tongs, hacksaw frame (fixed), file half-round bastard, file flat, hammer ball pane, tip cleaner, try square, spindle key, screwdriver, number punch, letter punch, magnifying glass, universal weld measuring gauge, spanner d.e., c-clamps, sledgehammer (double faced), s.s. tape, trolley for cylinder (h.p. unit), portable drilling machine, leather hand gloves, cotton hand gloves, leather apron, leather hand sleeves, safety boot, leg guard leather, arc welding single-coloured glasses, arc welding plain glass, gas welding goggles with colour glass, safety goggles (plain), welding helmet (fibber), first aid box, auto darkening welding helmet, fire extinguishers (foam type and co2 type), fire buckets with stand, radio graphic reference standard, pressure vessel codes (book or cd) ibr & asme sec ix, structural welding codes d1.1(book or cd), wall charts, transparencies and dvds related to the trade, engineering drawing trainees tool kit, white board, wall clock, pin board, black board and easel with stand, lcd projector, computer system with latest configuration, ups, lcd projector screen, document camera / visualizer, smart board / inter active board, over head projector, video camera with stand, printer cum scanner, laptop with all latest os, surround speakers, all in one copier, computer system with latest configuration, ups, computer system with latest configuration, cad/cam software, laser jet printer, ups, rubber hose clip, rubber hose (for oxygen), rubber hose (for acetylene), arc welding cable (multi coloured) copper, die penetrant testing kit, insulation ring, nozzle stock, spatter guard, gas nozzle, contact tip, contact tip, bare steel inner liner, bare steel inner liner, clamping piece, clamping piece, filler wire mild steel, filler wire mild steel, gas regulator, electrode, electrode, electrode, electrode, electrode, electrode, torch cap long, torch cap medium, torch cap short, clamping sleeve, head shield, clamping sleeve, clamping sleeve, clamping sleeve case, clamping sleeve case, gas nozzle ceramic, gas nozzle ceramic, gas nozzle ceramic, tungsten electrode, tungsten electrode, tungsten electrode, welding cable, steel plates 5mm, steel plates 6mm, steel plates 8mm, steel plates 10mm, welding electrodes, mig welding consumables, tig welding consumables, rubber hose acetylene, ag4 grinding wheels, hacksaw blade, ag4 grinding wheels, earth clamp, oxy acetylene gas cutting blow pipe, semi-automatic gas cutting booth, plasma cutting worktable.

Gandhinagar, Gujarat, India

BID NOW

8 |

Bid Value:
₹ 10.89 Cr. |

EMD:
₹ 32.66 Lakh |

26-05-2025 9 Days Left
|

T247 ID- 88419829 |

supply of goods, machine tools & equipment for an international standard itot in mechanic diesel engine (md) trade at iti bardoli - 1 auto electrical testbench set 1 2 starter motor assembly set 1 3 new airconditioned crdi vehicle in running conditionlmv nos. 1 4 diesel enginecrdi -4stroke can use the used /nonfunctional engine/ refabricated engine set 1 5 diesel engine(running condition)stationary type nos. 1 6 discrete component trainer/basic electronics trainer set 1 7 new heavy commercial vehicle (without body on frame) nos. 1 8 new working condition of diesel engine crdi, 4stroke, 4 cylinder engine, assly nos. 1 9 cut section of 4- and 6-cylinder diesel engine with moving condition nos. 1 10 fuel injection test bench set 1 11 electrical testbench set 1 12 new automobile diesel engine six cylinder in running condition nos. 1 13 common rail diesel fuel injector testing bench set 1 14 common rail pump test bench set 1 15 cylinder reboring machine set 1 16 wireless obd2 car code reader scan tool set 2 17 vertical engine head and engine top surface grinding machine set 1 18 crankshaft grinding machine set 1 19 electric engine lifting crane-1250kg set 1 20 hydraulic engine lifting crane nos. 1 21 electric valve grinding machine set 1 22 four cylinder four stroke diesel engine test rig with rope brake dynamometer nos. 1 23 exhaust gas analyzer - diesel nos. 1 24 turbo charger cut model full assembly with housing assembly of diesel engine nos. 1 25 radiator full cut model assembly with housing & fan assembly of diesel engine nos. 1 26 air conditioner full cut model assembly with housing & ac condenser 27 hydraulic power steering full cut model assembly with housing attachment nos. 1 28 engine wire harness connected complete with electrical equipment nos. 1 29 diesel fuel quality test equipment set nos. 1 30 training setup for adas systems set 1 31 4-wheel alignment set & hoist with advanced driver assistance systems (adas) set 1 32 training system for sensors in motor vehicles nos. 1 33 training system for the basics of pulse generation and ignition in vehicles nos. 1 34 training system: common rail diesel injection system nos. 1 35 air blow gun with standard accessories nos. 3 36 ammeter dc with external shunt nos. 13 37 air ratchet with standard accessories nos. 6 38 air impact wrench with standard accessories nos. 6 39 angle plate adjustable nos. 1 40 angle plate nos. 2 41 anvil with stand no 1 42 batterycharger nos. 2 43 blow lamp nos. 2 44 belt tensioner gauge no 1 45 car jet washer with standard accessories no 1 46 chain pulley block capacity with tripod stand no 1 47 compression testing gauge suitable for diesel engine with standard accessories nos. 2 48 connecting rod alignment fixture nos. 1 49 cylinder bore gauge set 4 50 cylinder liner-dry& wet liner, press fit & slide fit liner each 1 51 dc ohmmeter nos. 2 52 depth micrometer nos. 4 53 dial gauge nos. 4 54 different type of engine bearing model set 1 55 different type of piston model set 1 56 drill twist (various sizes) nos. 4 57 electric soldering iron each 2 58 engineers stethoscope nos. 1 59 fuel feed pump for diesel nos. 1 60 fuel injection pump(diesel)inline nos. 1 61 fuel injection pump dismantling toolkit /universal vice nos. 1 62 fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps each 1 63 glow plug tester nos. 2 64 granite surface plate with stand and cover nos. 1 65 hand reamers adjustable set 2 66 hand shear universal 67 injectormulti hole type, pintle type each 4 68 injector cleaning unit nos. 1 69 injector testing set(hand tester) nos. 1 70 lifting jack screw each 1 71 magneto spanner set with 8spanners set 1 72 marking out table nos. 1 73 multimeter digital nos. 5 74 oil pump for dismantling and assembling. nos. 2 75 oscilloscope nos. 2 76 outside micrometer nos. 2 77 outside micrometer nos. 2 78 outside micrometer nos. 1 79 outside micrometer nos. 1 80 piston ring compressor nos. 2 81 piston ring expander and remover. nos. 2 82 piston ring groove cleaner. nos. 1 83 portable electric drill machine nos. 1 84 punch letter 4mm(number) sets 2 85 radiator cut section-crossflow nos. 1 86 radiator cut section-downflow nos. 1 87 radiator pressure cap nos. 2 88 right cut snips nos. 2 89 rivet sets snap and dolly combined nos. 2 90 set of stock and dies with die stock-metric set 2 91 tinmans shear nos. 2 92 sheet metal gauge nos. 2 93 tinmans shear nos. 4 94 soldering copper nos. 2 95 solid parallels in pairs (different size) in metric set 2 96 straight edge gauge2ft. nos. 2 97 straight edge gauge4ft. nos. 2 98 stud extractor set sets 2 99 stud remover with socket handle nos. 1 100 surface gauge with dial test indicator plunger type nos. 4 101 tachometer (counting type) nos. 1 102 tandem master cylinder with booster nos. 4 103 telescope gauge nos. 4 104 temperature gauge with sensor nos. 2 105 thermostat nos. 2 106 timing lighter nos. 2 107 torque wrenches each 1 108 trammel nos. 2 109 turbo charger cut sectional view nos. 1 110 tyre pressure gauge with holding nipple 111 universal puller for removing pulleys, bearings nos. 1 112 vblock75 x38 mm pair with clamps nos. 2 113 vacuum gauge nos. 2 114 valve lifter nos. 1 115 valve spring compressor universal nos. 1 116 vernier calliper nos. 4 117 vice grip pliers nos. 2 118 water pump ford is mantling and assembling nos. 4 119 wire gauge(metric) nos. 2 120 workbench with vice and drawers nos. 4 121 arbor press hand operated 2 ton capacity nos. 1 122 bench lever shears nos. 1 123 drilling machine bench to drill nos. 1 124 dual magnetization yoke set 1 125 grinding machine pedestal (general purpose) nos. 1 126 hydraulic jack hi-lift each 1 127 liquid penetrate inspection kit set 1 128 multi scan tool nos. 1 129 pipe bending machine (hydraulic type) nos. 1 130 pneumatic rivet gun with standard accessories nos. 2 131 spring tension tester nos. 1 132 tin smiths bench folder nos. 1 133 trolley type portable air compressor nos. 1 134 battery-smf nos. 10 135 drill twist(assorted) nos. 25 136 hydrometer nos. 8 137 special tools and equipment set 1 138 hydraulic vertical honing machine for engine cylinder and brake bore nos. 1 139 pneumatic valve seat grinder and lapping kit nos. 1 140 intercooler cut model assembly with air filter & housing assembly diesel engine nos. 1 141 work benches with bench vices and storage draws to demonstrate machines nos. 1 142 dg set set 1 143 engineering drawing trainees tool kit set 26 144 air conditioner nos 1 145 air conditioner nos 4 146 allen key set of 12 pieces nos. 26 147 caliper inside with spring nos. 26 148 caliper outside with spring nos. 26 149 center punch. nos. 26 150 dividers with spring nos. 26 151 electrician screwdriver nos. 26 152 hammer ballpeen with handle 153 hands file for second cut flat nos. 26 154 philips screwdriver set of 5pieces nos. 26 155 pliers combination nos. 26 156 screwdriver blade nos. 26 157 screwdriver blade nos. 26 158 scriber nos. 26 159 spanner d.e. set of 12pieces nos. 26 160 spanner, ring set of 12 nos. 26 161 spanners socket with speed handle, t-bar, ratchet and universal set of 28 pieces nos. 26 162 steel rule nos. 26 163 steel tool box with lock and key(folding type) nos. 26 164 wire cutter and stripper nos. 26 165 adjustable spanner (pipe wrench) nos. 6 166 allen key set of 12pieces nos. 6 167 caliper inside with spring nos. 4 168 caliper outside with spring nos. 4 169 chisel flat nos. 4 170 chisel crosscut nos. 4 171 circlip pliers expanding and contracting each 4 172 clamps c nos. 2 173 clamps c nos. 2 174 clamps c nos. 2 175 cleaning tray nos. 4 176 copper bit soldering iron nos. 4 177 dividers with spring nos. 4 178 drift punch copper nos. 4 179 drill point angle gauge nos. 1 180 electric testing screwdriver nos. 4 181 engineers square nos. 4 182 feeler gauge 20blades (metric) nos. 4 183 file flat, bastard nos. 4 184 file, half round, second cut nos. 4 185 file, square second cut nos. 4 186 file, square round nos. 4 187 file, triangular, second cut nos. 4 188 files assorted sizes and types including safe edge file(20nos) set 2 189 flat file, second cut nos. 4 190 flat file, bastard nos. 4 191 grease gun nos. 2 192 grease gun heavy duty trolley type nos. 1 193 growler nos. 2 194 hacksaw frame nos. 10 195 hammer ball peen 196 hammer chipping nos. 5 197 hammer copper with handle nos. 4 198 hammer mallet nos. 4 199 hammer plastic nos. 4 200 hand operated crimping tool each 2 201 hand vice nos. 2 202 hollow punch set of seven pieces set 2 203 insulated screwdriver nos. 4 204 insulated screwdriver nos. 4 205 left cut snips nos. 4 206 magnifying glass nos. 2 207 oilcan nos. 4 208 philips screwdriver set of 5pieces nos. 2 209 pipe cutting tool nos. 2 210 pipe flaring tool nos. 2 211 pliers combination nos. 2 212 pliers flat nose nos. 2 213 pliers round nose nos. 2 214 pliers side cutting nos. 2 215 prick punch nos. 4 216 scraper flat nos. 2 217 scraper half-round nos. 2 218 scraper triangular nos. 2 219 scriber nos. 2 220 scriber with scribing block universal nos. 2 221 spanner clyburn nos. 1 222 spanner d.e. set of 12pieces nos. 4 223 spanner t. flocks for screwing up and up- screwing in accessible nos. 2 224 spanner, adjustable nos. 2 225 spanner, ring set of 12 metric sizes nos. 4 226 spanners socket nos. 2 227 spark lighter nos. 2 228 spark plug spanner nos. 2 229 steel measuring tape nos. 4 230 steel rule 15cm inch and metric nos. 4 231 steel rule 30cm inch and metric nos. 4 232 taps and dies complete sets(5types) set 1 233 taps and wrenches-metric sets 2 234 thread pitch gauge metric nos. 2 235 leather apron nos. 5 236 safety glasses nos 25 237 laptop with latest configuration pre-loaded with windows os and msoffice nos. 1 238 lcd projector with screen

Bardoli, Gujarat, India

BID NOW

9 |

Bid Value:
₹ 8.58 Cr. |

EMD:
₹ 5.79 Lakh |

26-05-2025 9 Days Left
|

T247 ID- 88062033 |

manufacturing and supply of prefabricated three piece moulds, luting sand & plain polythene for moisture free packing of various items pertaining to at welding

Lucknow, Uttar Pradesh, India

BID NOW

10 |

Bid Value:
₹ 5.12 Cr. |

EMD:
₹ 5.06 Lakh |

21-05-2025 4 Days Left
|

T247 ID- 87324844 |

corrigendum : custom bid for services - cpcls25160 - oph boiler-5 module replacement, tube replacement jobs including supply of materials for reliability improvement at cpcl manali-1 replacement of economizer module completely supply and replace economizer module 1 along with supports tube material: sa 210 gr.a1 size: 38.1mm od x 3.66mm thick electrode: er 70s2 rt: 100% supports-type 1, qty 54 no s replacement of modules shall be done along with increasing the clearance from elbow to casing plate (both sides by 10cm) as per drawing no 21-b-315131 rev 0. 2 replacement of superheater tubes: completely supply and replace primary and secondary stage super heater tubes, hanger tubes and all connected bends. electrode: er 70s2 ( for carbon steel), er 80s-b2 (for p-11) rt-100% as per the drawing no: jb0605-50030100-031-001 (by ijt) and jb0605-50030100- 031-002 (by ijt) 3 supply of stub, tubes and casing plate: supply and replace the reducer stub portion of first 5 sidewall tubes on east side and west side near steam drum and mud drum. stub material- sa 210 gr a1, qty=20 no s as per drawing no: jb0605-50020200-026-002 (by ijt) partially supply and replace the 3rd sidewall tube bent portion on west side as per drawing attached in the annexure-i. tube material- sa 210 gr a1 refer drawing -jb0605-50020200-026-001 (by ijt) and jb0605-50020200-026- 002 (by ijt) replacement of side wall tube to facilitate replacement of super heater tubes and sidewall stub portion. tube material- sa 210 gr a1 size-76.2mm od x 4.06 mm thk x 6m, qty=20 nos electrode- er 70s2 rt- 100% replacement of burner wall tubes from floor level to top tier burner refractory area and refractory renewal of burner wall. tube material- sa 210 gr a1 size-76.2mm od x 4.06 mm thk x 5m, qty=47 nos electrode- er 70s2 rt- 100% 4 repair/repl of casing plate: replacement of casing plate using is 2062 e250 gr b, 6mm thick for an area of 4 sq.m. 5 supply of spare: supply of reducer stub as spare for side wall tube 30 nos. supply of plate is 2062 e250 gr b, 6mm thick (6mmx6300x2000) 6 sq.m..

Tiruvallur, Tamil Nadu, India

BID NOW

11 |

Bid Value:
₹ 3.94 Cr. |

EMD:
₹ Refer Docs |

29-05-2025 12 Days Left
|

T247 ID- 88386194 |

supply of - o ring kit - nitrogen cylinder (part no- se-53251) ,identification sticker- pilot cylinder (part no- se-57149) ,outlet coupler (part no- se-54458) , control unit (part no-se-57110) , horn unit (part no- se-57392) , override unit (part no- se-54453) , sensor cable - 50 ft (part no- se-53727) , sensor cable - 80 ft (part no- se-53944) , sensorcable - 100 ft (part no- se-53695) , sensor cable - 125 ft(part no- se-53922) , sensor cable - 40 ft (part no- se-53727/1) , sensor cable - 30 ft (part no- se-53729) , nozzlecap (part no- se-53835) , nozzle slit (part no- se-54172/1) ,nitrogen cylinder assy. (part no- se-57480) , pilot cylinderassy. (part no- se-57146) , nitrogen cylinder assy. (part no-se-57112) , end of line unit ( part no- se-53799) , portablecylinder assy. (part no- se-53836) , teflon bush ( part no-se-54335/1) , sensor clip (part no- se-54462) , nozzleconical (part no- se-53508/2) , 1/2" star washer (part no-se-58193) , nitrogen cylinder assy. (part no- se-57549) ,dcp cylinder assy. - 15 kg (part no- se-57512) , dcpcylinder assy. - 20 kg (part no- se-57510) , dcp cylinderassy. - 12.5 kg (part no- se-57186) , main cable assy. (partno- se-57460) , main cable assy. (part no- se-57262) , maincable assy. (part no- se-57716) , main cable assy. -l bendoverride(part no- se-57501) , main cable assy. (part no- se-57570) , main cable assy. (part no- se-57145/1) , maincable assy. (part no- se-57170) , main cable assy. (part no-se-57281) , main cable assy. (part no- se-57189) , pipecross distributor (5 way) (part no- se-53512/1) , main cableassy. (part no- se-57374) , main cable assy. (part no- se-57118) , main cable assy. (part no- se-57234) , main cableassy. (part no- se-57356) , pipe cross distributor (4 way)(part no- se-53512/3) , pipe cross mtg. bracket (part no- se-54115) , pipe cross mtg. bracket (part no- se-57837/1) , 53522/13) , 1/2" hose assy. - 800 mm (part no- se-53522/12) , 1/2" hose assy. - 900 mm (part no- se-53522/55) , 1/2" hose assy. - 1000 mm (part no- se-53584/18) , 1/2" hose assy. - 1100 mm (part no- se-53522/6) , 1/2" hose assy. - 1200 mm (part no- se-53584/8) , 1/2" hose assy. - 1500 mm (part no- se-53522/10) , 1/2" hose assy. - 1600 mm (part no- se-53584/5) , 1/2" hose assy. - 1700 mm (part no- se-53522/14) , 1/2" hose assy. - 1800 mm (part no- se-53522/9) , 1/2" hose assy. - 2000 mm (part no- se-53584/9) , 1/2" hose assy. - 2100 mm ( part no- se-53584/13) , 1/2" hose assy. - 2400 mm ( part no- se-53584/28) , 1/2" hose assy. - 2500 mm ( part no- se-53584/6) , 1/2" hose assy. - 2600 mm ( part no- se- 53522/88) , 1/2" hose assy. - 2800 mm ( part no- se- | quantity - 22783

Angul, Orissa, India

BID NOW

Access BOQ leads for “audio and visual equipment”

Connect with more than 10K verified Buyers for “audio and visual equipment”

Explore Buyers

12 |

Bid Value:
₹ 3.07 Cr. |

EMD:
₹ 5.20 Lakh |

04-06-2025 18 Days Left
|

T247 ID- 88363443 |

supply of spares for ald high vacuum furnace - complete hotbox , heat exchanger , hearth support assy ,fixture , vfd drive , 1041 seal kit , duplex thermocoupletype s , penning gauge , pirani gauge senser , single loopcontroller , safety controller , heater strip , heater holderbracket , heater holder tube , heater holder moly pin ,terminal holding bracket outer , terminal holding bracketinner , terminal holding washer , heater connector packing, heater connector , heater connector holder moly pin ,ground terminal connector , moly terminal , moly groundterminal , terminal tube stopper , terminal tube protectorwasher , moly washer 80x50x0.5 , moly washer 50x16x0.5, moly washer 30x11x0.5 , moly washer 50x22x0.5 , heaterholder bracket moly pin 5x50 , moly stud m6x20 , moly studm6x32 , moly stud m6x25 , moly stud m6x40 , moly hex nut m6x1p , moly la wire 2mm dia x 4 mtr , ceramic tube al99 5-12x16x8 , ceramic tube crt 501 , ceramic tube al99 5-11x15x8 , ceramic t bush al 99 5-11x15-25x25 ,ceramic tube crt 509 , ceramic tt bush al 99 5-11x15-25x45 , ceramic tube crt 508 , copper connector forground , rubber bellow for mp , rubber bellow for rp , metalbellow for dp , solenoid valve , read switch for safety piston, rtd for dp pump , giv valve , safety valve assy , air inletvalve , roughing valve , backing valve , butterfly valve ,regulator , water flow switches , cylinder assy for frontdoor , fuse for thyristor full one set , lcd tft with backlight , di 16x24vdc st , dq 16x24vdc , ai 4xu i 2 wire st ,ai 4xrtd tc 2 3 4 wire hf , aq 2xu st , cpu 1510sp 1 pn ,memeory card quantity - 1618

Visakhapatnam, Andhra Pradesh, India

BID NOW

13 |

Bid Value:
₹ 3.06 Cr. |

EMD:
₹ 6.12 Lakh |

23-05-2025 6 Days Left
|

T247 ID- 87765640 |

supply of spares for esp- shock pad/head, en8, u-clamp for collecting electrode, is2062, bush for shock bar concave, en8, bush for shock bar convex, en8, sleeve/bush, is2062, lower horizontal plate, is2062, bushing/ sleeve (to connect the shafts), is2062, shaft coupling (1), is2062, shaft coupling (2), is2062, rapping hammer assembly, is2062, en8, adjusting ring, is2062, internal bearing (two roller), en8, internal bearing (four roller), en8, barbed wire, is2062, spinule (barbed electrode type-2), is2062, spiral wire, ss3161, support insulator heater 1.5 kw, ceramic, support insulator heater 1 kw, ss304, antidust cover, is2062, en8, bearing for vertical shaft (three roller), en8, bush for vertical rapping shaft (three roller bearing),, en8, minor pin wheel, is2062,en8,en19, major pin wheel, is2062,en8,en19, internal bearing (four roller), en8, internal bearing (two roller), en8, bush for emitting horizontal shaft (for bearing), en8, shaft end, en8, support tray, is2062, en8, rapping hammer assembly, is2062, en8, adjusting ring, is2062, shaft insulator heater, ceramic, shaft casing (vertical bearing cover plate), is2062,, en8, bearing 111211, chrome steel, sealing bush (vertical bearing base plate), en8, drive shaft (top of shaft insulator), en8

Jhalawar, Rajasthan, India

BID NOW

14 |

Bid Value:
₹ 3.06 Cr. |

EMD:
₹ Refer Docs |

23-05-2025 6 Days Left
|

T247 ID- 87766373 |

supply of spares for esp of unit 1&2 (2x600mw), katpp, rvun.

Jhalawar, Rajasthan, India

BID NOW

15 |

Bid Value:
₹ 3.06 Cr. |

EMD:
₹ 6.12 Lakh |

22-05-2025 5 Days Left
|

T247 ID- 87777651 |

1) requirement of modified cross head assembly with cv disc and cv stem for ms control valve (cv-2 & cv-3) of 2x600mw, 2) supply of spares for esp of unit # 1 & 2 (2x600mw).

Jhalawar, Rajasthan, India

BID NOW

16 |

Bid Value:
₹ 2.69 Cr. |

EMD:
₹ 2.84 Lakh |

28-05-2025 11 Days Left
|

T247 ID- 88062034 |

comprehensive annual maintenance contract of under floor wheel lathe of emu car shed, tikiapara for a period of 05 years.

Tirupathi, Andhra Pradesh, India

BID NOW

17 |

Bid Value:
₹ 1.95 Cr. |

EMD:
₹ Refer Docs |

19-05-2025 2 Days Left
|

T247 ID- 88193651 |

procurement of spare parts of apron feeder of l andt make wagon tippler for chp ph 1 sstpp mppgcl dongalia

Khandwa, Madhya Pradesh, India

BID NOW

18 |

Bid Value:
₹ 1.79 Cr. |

EMD:
₹ 3.58 Lakh |

22-05-2025 5 Days Left
|

T247 ID- 86898034 |

corrigendum : supply of spares of instrumentation limited palakkad make pneumatic drive actuator of kstps, kota 1 to 7 - valve positioner vpp03/vpr03, htp positioner without bypass, position feedback transmitter ept-002 for control valve, position feedback transmitter ept-002 for power cylinder, pcp-001position for power cylinder, complete repair/seal kit for valve positioner vpp03/vpr03, complete seal kit with piston rings for model vdc-vp-7, complete seal kit with piston rings for model vdc-vp-6, diaphragm for sa1r actuator suitable for (astv, fotv, sstv, aatv) model :- vsl 1", diaphragm for va1r actuator as per s no. 841821 for hotv model :- vst1.5, diaphragm for va2d actuator as per s. no. 851518 for horv model :-vtm va20.a216 (d) 1", seal kit for pcd 10x16 power cylinder burnner tilt, gaiter for pc model 10x16 lt burnner tilt, gaiter for pc model 4x4 lt for sadc, seal kit for pc model 4x4 for sadc, diaphragm for actuator model:- vdc va5r, tag no. cdp-207, size :-10x8 lift 100mm, 26 holes, lift:-100mm, sl. no. 840226, single acting air lock relay for control valves, make: il palghat, double acting air lock relay for control valves, make: il palghat, diaphragm for pcp001, spool with sleeve and 'o' ring for pcp001, lever with bearing and cover for pcp001, diaphragm of model:- vsc/va2r, s.no. 9214097 size:- 3"x2" lift 37.5 mm, 14 holes, diaphragm of model:- vsn/va3r, s.no. 9211791 size:- 6" lift 50 mm, 22 holes, diaphragm of model:- vsc/va4r, s.no. 2715970 size:- 3" lift 37.5 mm, 22 holes, seal kit for model: pcd 6x8 t, seal kit for model: pcd 8x16 t, seal kit for model: pcd 8x8 t, seal kit for model: pcd 4x8 t, seal kit for model: pcd 20x14 t, complete seal kit with piston rings for model:- vsc-va4r, s.no. 02715970 (spray control valve), diaphragm of model:- vsp-mva4r, s.no. 02715877 (spray control valve), complete seal kit with piston rings for model:- vsp-mva4r, s.no. 02715877 (spray control valve), complete seal kit with piston rings for model:- vsc-spa2m , s.no. 02715920, diaphragm of model:- vsp-mva3r, s.no. 2715900, diaphragm of model:- vsc-va2d, s.no. 2715881, complete seal kit with piston rings for actuator model vdc-spa1m, s.no. 9212193, complete seal kit with piston rings for actuator model vdc-spa1m, s.no. 9212190, diaphragm of model:- vsl-va1d, s.no. 9113210, diaphragm of model:- vst-va1r, s.no. 9210937, seal kit for model pcd -02-68lt s.no. 150/87, seal kit for model pclt 8x24 t s.no. -3830262

Kota, Rajasthan, India

BID NOW

19 |

Bid Value:
₹ 1.68 Cr. |

EMD:
₹ 3.36 Lakh |

21-05-2025 4 Days Left
|

T247 ID- 87217333 |

corrigendum : tn-mm-2051-supply of spares for ball tube mill bbd - 4772 at sstps, suratgarh

Sri Ganganagar, Rajasthan, India

BID NOW

20 |

Bid Value:
₹ 1.35 Cr. |

EMD:
₹ Refer Docs |

26-05-2025 9 Days Left
|

T247 ID- 88433005 |

procurement of spare parts of wagon tippler and side arm charger of landt make 2x600 mw chp ph 1 sstpp mppgcl dongalia

Khandwa, Madhya Pradesh, India

BID NOW

Tender247

A unit of I-sourcing Technologies Pvt. Ltd.

Tender247.com is India's #1 Tender Portal which provides Tenders, Tender Results Information, Competitor Analytic Reports, Bid Management services. The portal provides a platform for finding Joint Venture or Consortium Partner and also provides bid consultancy and other relevant services to help contractors in winning tenders.

Services

Connect with Us
LinkedinFacebookInstagram
Browsers supported: IE9 & Above, Chrome 44 +, Firefox 44 +
Copyright © 2017 tender247.com. All rights reserved. Terms & Conditions | Privacy Policy
whatsapp